OK.
To day a tired changed /etc/sysctl.conf line machdep.allowaperture=2 to
machdep.allowaperture=1 but the is not solution.
This is dmesg:
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A
CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem = 1060163584 (1011MB)
avail mem = 1016815616 (969MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286 BIOS, date 10/09/08, SMBIOS rev. 2.4 @ 0xe8e50 (32
entries)
bios0: vendor Packard Bell version "v0.3103" date 10/09/2008
bios0: Packard Bell DOA150
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus 2 (EXP2)
acpiprt4 at acpi0: bus 3 (EXP3)
acpiprt5 at acpi0: bus 4 (EXP4)
acpiec0 at acpi0
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
cpu0: unknown Enhanced SpeedStep CPU, msr 0x060f0c2706000c27
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1600 MHz (1324 mV): speeds: 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x40000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not
configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 4 int 16 (irq 11)
azalia0: codecs: Realtek ALC268
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4
int 16 (irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4
int 17 (irq 255)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL
(0x2480), apic 4 int 17 (irq 11), address 00:23:8b:7e:01:e9
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4
int 18 (irq 255)
pci3 at ppb2 bus 3
ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int
18 (irq 11)
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2b:a0:10:3d
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4
int 19 (irq 255)
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4
int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4
int 17 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4
int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4
int 19 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4
int 16 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02:
DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST9120817AS>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02:
apic 4 int 17 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
acpibat0: BAT1 inserted
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Sonix Technology
Co., Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 2
video0 at uvideo0
uhidev0 at uhub1 port 1 configuration 1 interface 0 "IBM Optical"
rev 2.00/5.80 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub1 port 1 configuration 1 interface 0 "IBM Optical"
rev 2.00/5.80 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
The Xorg log is this:
(--) checkDevMem: using aperture driver /dev/xf86
(--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version
3.32)
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.5 i386
Current Operating System: OpenBSD babylon.my.domain 4.5 GENERIC#1749 i386
Build Date: 27 February 2009B 05:01:11PM
B
B Before reporting problems, check http://wiki.x.org
B to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
B ( ) from command line, (!!) notice, (II) informational,
B (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 14 20:40:23
2009
(EE) Unable to locate/open config file
(II) Loader magic: 0x3c01e2e0
(II) Module ABI versions:
B X.Org ANSI C Emulation: 0.4
B X.Org Video Driver: 4.1
B X.Org XInput driver : 2.1
B X.Org Server Extension : 1.1
B X.Org Font Renderer : 0.6
(II) Loader running on openbsd
(--) PCI:*(0...@0:2:0) Intel 82945GME Video rev 3, Mem @ 0x58480000/0,
0x40000000/0, 0x58500000/0, I/O @ 0x000060c0/0
(--) PCI: (0...@0:2:1) Intel 82945GM Video rev 3, Mem @ 0x58400000/0
(==) Matched intel for the autoconfigured driver
New driver is "intel"
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
B Section "Device"
B B IdentifierB "Builtin Default intel Device 0"
B B DriverB "intel"
B EndSection
B Section "Screen"
B B IdentifierB "Builtin Default intel Screen 0"
B B DeviceB "Builtin Default intel Device 0"
B EndSection
B Section "Device"
B B IdentifierB "Builtin Default fbdev Device 0"
B B DriverB "fbdev"
B EndSection
B Section "Screen"
B B IdentifierB "Builtin Default fbdev Screen 0"
B B DeviceB "Builtin Default fbdev Device 0"
B EndSection
B Section "Device"
B B IdentifierB "Builtin Default vesa Device 0"
B B DriverB "vesa"
B EndSection
B Section "Screen"
B B IdentifierB "Builtin Default vesa Screen 0"
B B DeviceB "Builtin Default vesa Device 0"
B EndSection
B Section "ServerLayout"
B B IdentifierB "Builtin Default Layout"
B B ScreenB "Builtin Default intel Screen 0"
B B ScreenB "Builtin Default fbdev Screen 0"
B B ScreenB "Builtin Default vesa Screen 0"
B EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |B B |-->Monitor "<default monitor>"
(**) |B B |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen
0".
B Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) |B B |-->Monitor "<default monitor>"
(**) |B B |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen
0".
B Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) |B B |-->Monitor "<default monitor>"
(**) |B B |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen
0".
B Using a default monitor configuration.
(==) Not automatically adding devices
(==) Not automatically enabling devices
(==) No FontPath specified.B Using compiled-in default.
(==) FontPath set to:
B /usr/X11R6/lib/X11/fonts/misc/,
B /usr/X11R6/lib/X11/fonts/TTF/,
B /usr/X11R6/lib/X11/fonts/OTF,
B /usr/X11R6/lib/X11/fonts/Type1/,
B /usr/X11R6/lib/X11/fonts/100dpi/,
B /usr/X11R6/lib/X11/fonts/75dpi/
(==) ModulePath set to "/usr/X11R6/lib/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
B Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
B Using the default keyboard configuration.
(II) System resource ranges:
B [0] -1B 0B 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
B [1] -1B 0B 0x000f0000 - 0x000fffff (0x10000) MX[B]
B [2] -1B 0B 0x000c0000 - 0x000effff (0x30000) MX[B]
B [3] -1B 0B 0x00000000 - 0x0009ffff (0xa0000) MX[B]
B [4] -1B 0B 0x0000ffff - 0x0000ffff (0x1) IX[B]
B [5] -1B 0B 0x00000000 - 0x000000ff (0x100) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 1.0.0
B Module class: X.Org Server Extension
B ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 1.0.0
B Module class: X.Org Server Extension
B ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 1.0.0
B ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT
Project"
B compiled for 1.5.3, module version = 2.1.0
B Module class: X.Org Font Renderer
B ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 1.0.0
B ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "intel"
(II) Loading /usr/X11R6/lib/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 2.4.3
B Module class: X.Org Video Driver
B ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/X11R6/lib/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 1.3.0
B Module class: X.Org Video Driver
B ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 1.3.0
B Module class: X.Org XInput Driver
B ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 1.3.1
B Module class: X.Org XInput Driver
B ABI class: X.Org XInput driver, version 2.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
B i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
B E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
B 965GM, 965GME/GLE, G33, Q35, Q33,
B Mobile IntelCB. GM45 Express Chipset,
B Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 0...@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
B [0] -1B 0B 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
B [1] -1B 0B 0x000f0000 - 0x000fffff (0x10000) MX[B]
B [2] -1B 0B 0x000c0000 - 0x000effff (0x30000) MX[B]
B [3] -1B 0B 0x00000000 - 0x0009ffff (0xa0000) MX[B]
B [4] -1B 0B 0x0000ffff - 0x0000ffff (0x1) IX[B]
B [5] -1B 0B 0x00000000 - 0x000000ff (0x100) IX[B]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
B [0] -1B 0B 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
B [1] -1B 0B 0x000f0000 - 0x000fffff (0x10000) MX[B]
B [2] -1B 0B 0x000c0000 - 0x000effff (0x30000) MX[B]
B [3] -1B 0B 0x00000000 - 0x0009ffff (0xa0000) MX[B]
B [4] 0B 0B 0x000a0000 - 0x000affff (0x10000) MS[B]
B [5] 0B 0B 0x000b0000 - 0x000b7fff (0x8000) MS[B]
B [6] 0B 0B 0x000b8000 - 0x000bffff (0x8000) MS[B]
B [7] -1B 0B 0x0000ffff - 0x0000ffff (0x1) IX[B]
B [8] -1B 0B 0x00000000 - 0x000000ff (0x100) IX[B]
B [9] 0B 0B 0x000003b0 - 0x000003bb (0xc) IS[B]
B [10] 0B 0B 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 1.0.0
B ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 1.1.0
B ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 0.1.0
B ABI class: X.Org Video Driver, version 4.1
(II) intel(0): Creating default Display subsection in Screen section
B "Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
(--) intel(0): Chipset: "945GME"
(--) intel(0): Linear framebuffer at 0x40000000
(--) intel(0): IO registers at addr 0x58480000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules//libint10.so
(II) intel(0): initializing int10
(==) intel(0): Write-combining range (0xa0000,0x20000) was already clear
(==) intel(0): Write-combining range (0xc0000,0x40000) was already clear
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(==) intel(0): Write-combining range (0x0,0x1000) was already clear
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip
Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics
Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(==) intel(0): Write-combining range (0x0,0x1000) was already clear
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address
0xA0.
(II) intel(0): EDID vendor "AUO", prod id 5058
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): EDID vendor "AUO", prod id 5058
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 1.0.0
B ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/X11R6/lib/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
B compiled for 1.5.3, module version = 2.4.0
B ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to
0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to
0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS
VBLANK_INT_STATUS
(II) UnloadModule: "vesa"
(II) Unloading /usr/X11R6/lib/modules/drivers//vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?B No, I don't.
(II) resource ranges after preInit:
B [0] -1B 0B 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
B [1] -1B 0B 0x000f0000 - 0x000fffff (0x10000) MX[B]
B [2] -1B 0B 0x000c0000 - 0x000effff (0x30000) MX[B]
B [3] -1B 0B 0x00000000 - 0x0009ffff (0xa0000) MX[B]
B [4] 0B 0B 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
B [5] 0B 0B 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
B [6] 0B 0B 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
B [7] -1B 0B 0x0000ffff - 0x0000ffff (0x1) IX[B]
B [8] -1B 0B 0x00000000 - 0x000000ff (0x100) IX[B]
B [9] 0B 0B 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
B [10] 0B 0B 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 241152 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 964608 kB available
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is -1, (Operation not permitted)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is -1, (Operation not permitted)
drmOpenDevice: Open failed
[drm] failed to load kernel module "i915"
(EE) [drm] drmOpen failed.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer
compression
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)B B B B B B B B Solid
(II)B B B B B B B B Copy
(II)B B B B B B B B Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 7 at 0x00c00000 (pgoffset 3072)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB,
0x000000003f820000 physical
)
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB,
0x000000003fe20000 physical
)
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000003fe21000
physical
)
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB,
0x000000003fe33000 physical
)
(II) intel(0): 0x007bf000:B B B B B B B B B B B end of stolen memory
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
(II) intel(0): 0x10000000:B B B B B B B B B B B end of aperture
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):B B Pipe A is off
(II) intel(0):B B Display plane B is now disabled and connected to pipe A.
(II) intel(0):B B Pipe B is on
(II) intel(0):B B Display plane A is now enabled and connected to pipe B.
(II) intel(0):B B Output VGA is connected to pipe none
(II) intel(0):B B Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled
message.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Failed
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 195 x 113
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: found Device "/dev/wsmouse"
(**) <default pointer>: Protocol: WSMouse
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(**) Option "Device" "/dev/wsmouse"
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) Option "CoreKeyboard"
(**) <default keyboard>: always reports core events
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(--) <default keyboard>: using wscons layout us
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>"
(type: MOUSE)
(II) evaluating device (<default keyboard>)
(II) XINPUT: Adding extended input device "<default keyboard>"
(type: KEYBOARD)
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(II) intel(0): xf86UnbindGARTMemory: unbind key 6
(II) intel(0): xf86UnbindGARTMemory: unbind key 7
(WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 6
failed
B (Bad address)
(WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 7
failed
B (Bad address)
---Mensaje original---
I guys.
I have a problem with my IntelB video card, my X environment not run in my
netbook, this display the next error:
(WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 6
failed B (Bad address)
(WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 7
failed B (Bad address)
I atach my dmesg and my Xorg.0.log for review.
Any idea?
Tanks!!!!
Dimitry.-
http://deoxyt2.livejournal.com
OpenBSD - Free, Functional & Secure
Mujer, Motor, Gente... y las imC!genes mC!s visitadas. B!Visita el Top de
StarMedia! http://us.starmedia.com/
[demime 1.01d removed an attachment of type application/octet-stream which had
a name of dmesg.txt]
[demime 1.01d removed an attachment of type application/octet-stream which had
a name of Xorg.0.log]
Dimitry.-
http://deoxyt2.livejournal.com
OpenBSD - Free, Functional & Secure
Motor: nuevos modelos, nuevas sensaciones. B!ConC3celos en Autocity!
http://www.autocity.com/latam/index_novedades.html
