Hi,
My computer is Intel two core stuff..., and I used to compile kernel to use
original NTFS file system, and I'm using the kernel "GENERIC", which is
without the ".MP", Is it right? Will it have too much effect if I just keep
it the same as now?
Here's the information I found: When I boot computer, it will display two
cpu information; in dmesg, there's one cpu; and with the command sysctl, it
said ncput=1, do these matter ?
Thanks.
The following is my dmesg:
OpenBSD 4.5 (kernel) #0: Sun Aug 9 05:25:48 HKT 2009
r...@win7:/wk/other/build/kernel
cpu0: Genuine Intel(R) CPU T2130 @ 1.86GHz ("GenuineIntel" 686-class) 1.87
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,xTPR
real mem = 2137485312 (2038MB)
avail mem = 2058539008 (1963MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/26/08, BIOS32 rev. 0 @ 0xfd690,
SMBIOS rev. 2.4 @ 0xe0010 (67 entries)
bios0: vendor LENOVO version "7EETC9WW (2.19 )" date 02/26/2008
bios0: LENOVO 0657LN1
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT
SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4)
PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus -1 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 12 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 98 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "92P1141" serial 1625 type LION oem "SONY"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1600 0xd0800/0x1000
0xe0000/0x10000
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06150e2806000e28
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1867 MHz (1340 mV): speeds: 1867, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 1
int 17 (irq 11)
azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog
Devices AD1981HD
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20
(irq 11)
pci1 at ppb0 bus 2
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x21, BCM5750 C1
(0x4201): apic 1 int 16 (irq 11), address 00:16:d3:be:27:c3
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22
(irq 11)
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23
(irq 11)
pci3 at ppb2 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 21
cbb0 at pci4 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int 16
(irq 11)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI HTS541612J9SA00>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-T10N, 1.04> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int
23 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
