some of the Atom boards seem to need APIC; if you want to stick with
4.5 then try the GENERIC.MP kernel (bsd.mp); otherwise try a -current
snapshot (where APIC is used in GENERIC as well as GENERIC.MP).


On 2009/07/04 17:00, Hendrickson, Kenneth wrote:
> Cannot Boot with Intel D201GLY Motherboard
> 
> Disk is 120GB PATA IDE
> 
> dmesg, fdisk output, and disklabel output are all attached
> OpenBSD.PDR is also attached
> 
> I have Googled for problems/answers, and still run into a dead end.
> 
> There must be a requirement which is not stated in the documentation,
> which I am not following.  Please help.
> 
> (I am an experienced OpenBSD user, having used OpenBSD continuously
> since 1998, and having built my own kernels/userland, and also have
> built OpenBSD for embedded systems.)
> 
> The instructions for booting from NTLDR (Windows 2000) do not work.
> As soon as the messages get to the CPU, the system reboots.  Booting
> never works, either from the OpenBSD partition, or from NTLDR from
> Windows 2000.  I have included my OpenBSD.PDR file for examination.
> 
> Originally, my OpenBSD partition was #4 in fdisk.  I added the #1
> partition, and had both #1 and #4 set to "a6" for OpenBSD.  That
> didn't work.  I then chose only #1 partition to be "a6" for OpenBSD,
> and #4 partition was set to "da" for "No Filesystem".  That also
> didn't work.  Please note that my entire OpenBSD / filesystem is
> within the 1024 cylinder boundary.  The /boot file is totally
> contained within the 1024 cylinder boundary.  It still won't boot.
> It won't boot on its own, nor will it boot from the Windows 2000
> NTLDR bootloader.
> 
> Also note that while my fdisk and disklabel indicates Linux
> partitions, none of them have yet been installed.  I installed
> Windows 2000 first, then OpenBSD.  Since I could never get OpenBSD
> to boot, I have not yet installed Linux.
> 
> Please help if you can.
> 
> Thank you,
> Kenneth J. Hendrickson
> 
> [demime 1.01d removed an attachment of type application/octet-stream which 
> had a name of dmesg]
> 
> [demime 1.01d removed an attachment of type application/octet-stream which 
> had a name of fdisk]
> 
> [demime 1.01d removed an attachment of type application/octet-stream which 
> had a name of disklabel]
> 
> [demime 1.01d removed an attachment of type application/octet-stream which 
> had a name of OpenBSD.PDR]

Reply via email to