Thanks Stuart
, I've made some progress but still no connectivity
- recent snapshot gets me an otus driver and a
man page for instructions to follow
I've grabbed the firmware as per the man page and used pkg_add with it
which gives me the following in /etc/firmware
otus-init
otus-licence
otus-main
Now when I plug the device in, I get umass detection and then detach and then
I get
otus0 at uhub0 port 1 "AVM Berlin FRITZ!WLAN USB Stick N" rev 2.00/4.03 addr
2
otus0: could not load init firmware
Anyone got any ideas for next steps ?
Full demesg and uname
4.5 GENERIC#160
OpenBSD 4.5-current (GENERIC) #160: Tue May 12 20:45:38 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 897 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,S
SE
real mem = 267874304 (255MB)
avail mem = 250662912 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/28/02, BIOS32 rev. 0 @
0xfd820, SMBIOS rev. 2.3 @ 0xfff0000 (46 entries)
bios0: vendor IBM version "16ET29WW (1.09 )" date 02/28/2002
bios0: IBM 26474EG
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd7b0/0x850
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
extent `pciio' (0x0 - 0xffffffff), flags=0
0x1800 - 0x1847
0x1850 - 0x187f
0x10000 - 0xffffffff
extent `pcimem' (0x0 - 0xffffffff), flags=0
0x1000 - 0x9ffff
0xdc000 - 0xfffffff
0x50000000 - 0x50000fff
0x50100000 - 0x50100fff
0xe8000000 - 0xe8122fff
0xf0000000 - 0xfbffffff
0xfff80000 - 0xffffffff
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
extent `ppb0 pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0xffffffff
vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x13
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0 "TI PCI1450 CardBus" rev 0x03: irq 11
cbb1 at pci0 dev 2 function 1 "TI PCI1450 CardBus" rev 0x03: irq 11
fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x0c, i82550: irq 11,
address 00:03:47:7b:6d:1e
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 3 function 1 not configured
clcs0 at pci0 dev 5 function 0 "Cirrus Logic CS4280/46xx CrystalClear"
rev 0x01: irq 11
ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02:
SpeedStep
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATDA04-0>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2512, 1115> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at piixpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask effd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
clcs0: firmware loaded
audio0 at clcs0
umass0 at uhub0 port 1 configuration 1 interface 0 "AVM Berlin
FRITZ!WLAN USB Stick N" rev 2.00/4.03 addr 2
umass0: using ATAPI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
cd1 at scsibus1 targ 1 lun 0: <FRITZ!, WLAN selfinstall, 1.00> ATAPI
5/cdrom removable
cd1 detached
scsibus1 detached
umass0 detached
otus0 at uhub0 port 1 "AVM Berlin FRITZ!WLAN USB Stick N" rev 2.00/4.03 addr
2
otus0: could not load init firmware
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=13
RX status=6
otus0 detached
umass0 at uhub0 port 1 configuration 1 interface 0 "AVM Berlin
FRITZ!WLAN USB Stick N" rev 2.00/4.03 addr 2
umass0: using ATAPI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
cd1 at scsibus1 targ 1 lun 0: <FRITZ!, WLAN selfinstall, 1.00> ATAPI
5/cdrom removable
cd1 detached
scsibus1 detached
umass0 detached
otus0 at uhub0 port 1 "AVM Berlin FRITZ!WLAN USB Stick N" rev 2.00/4.03 addr
2
otus0: could not load init firmware
On Wed, May 13, 2009 at 1:23 PM, Stuart Henderson <s...@spacehopper.org>
wrote:
> try -current.
>
>
> On 2009-05-13, openbsd misc <open...@6wells.com> wrote:
>> I was given a AVM FRITZ!WLAN USB Stick N and I found some references to it
in
>> a man page for otus driver (rel 1.3 and 1.4).
>>
>> However searching the man pages
>> via openbsd.org I can't find any mention of a released otus driver at
>> least in 4.5 (as
>> per my official CD).
>>
>> Also I noticed this line in the web page for changes between 4.5 and
-current
>> "Enabled otus(4) on amd64 and i386 GENERIC kernels."
>> But clicking on the otus(4) link,
>> gives me Sorry, no data found for `otus(4)'.
>>
>> Can anyone shed any light on what the odds are of getting this device
working ?
>>
>>
>> If I plug it in to my old t22 Thinkpad (usb 1.1 I'm guessing) it
>> picks it up as a mass storage device
>>
>> Thanks
>>
>> uname 4.5 Generic 1749 i386
>>
>>
>>
>> dmesg
>>
>> SR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
>> real mem = 267874304 (255MB)
>> avail mem = 250728448 (239MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 02/28/02, BIOS32 rev. 0 @
>> 0xfd820, SMBIOS rev. 2.3 @ 0xfff0000 (46 entries)
>> bios0: vendor IBM version "16ET29WW (1.09 )" date 02/28/2002
>> bios0: IBM 26474EG
>> apm0 at bios0: Power Management spec V1.2
>> apm0: battery life expectancy 46%
>> apm0: AC off, battery charge high, estimated 0:33 hours
>> acpi at bios0 function 0x0 not configured
>> pcibios0 at bios0: rev 2.1 @ 0xfd7b0/0x850
>> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/208 (11 entries)
>> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
>> pcibios0: PCI bus #5 is the last bus
>> bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800 0xdc000/0x4000!
0xe0000/0x10000
>> cpu0 at mainbus0: (uniprocessor)
>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
>> intelagp0 at pchb0
>> agp0 at intelagp0: aperture at 0xf8000000, size 0x4000000
>> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
>> pci1 at ppb0 bus 1
>> vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x13
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> cbb0 at pci0 dev 2 function 0 "TI PCI1450 CardBus" rev 0x03: irq 11
>> cbb1 at pci0 dev 2 function 1 "TI PCI1450 CardBus" rev 0x03: irq 11
>> fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x0c, i82550: irq 11,
>> address 00:03:47:7b:6d:1e
>> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
>> "AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 3 function 1 not configured
>> clcs0 at pci0 dev 5 function 0 "Cirrus Logic CS4280/46xx CrystalClear"
>> rev 0x01: irq 11
>> reset_codec: AC97 inputs slot ready timeout
>> clcs0: AC97 write fail (DCV!=0) for add=0x26 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x8000
>> clcs0: AC97 write fail (DCV!=0) for add=0x06 data=0x8000
>> clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x04 data=0x8000
>> clcs0: AC97 write fail (DCV!=0) for add=0x38 data=0x8080
>> clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
>> clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
>> clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
>> clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
>> clcs0: AC97 write fail (DCV!=0) for add=0x08 data=0x0f0f
>> clcs0: AC97 write fail (DCV!=0) for add=0x0a data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x0c data=0x8008
>> clcs0: AC97 write fail (DCV!=0) for add=0x0e data=0x8008
>> clcs0: AC97 write fail (DCV!=0) for add=0x0e data=0x8008
>> clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x10 data=0x8808
>> clcs0: AC97 write fail (DCV!=0) for add=0x12 data=0x8808
>> clcs0: AC97 write fail (DCV!=0) for add=0x14 data=0x8808
>> clcs0: AC97 write fail (DCV!=0) for add=0x16 data=0x8808
>> clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x8808
>> clcs0: AC97 write fail (DCV!=0) for add=0x1a data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x1c data=0x8000
>> clcs0: AC97 write fail (DCV!=0) for add=0x1e data=0x8000
>> clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x22 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x22 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x26 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x2a data=0x0000
>> clcs0: AC97 read prob. (DCV!=0) for add=0x7c
>> clcs0: AC97 read prob. (DCV!=0) for add=0x7e
>> clcs0: AC97 read prob. (DCV!=0) for add=0x00
>> ac97: codec id not read
>> clcs0: AC97 read prob. (DCV!=0) for add=0x28
>> clcs0: AC97 read prob. (DCV!=0) for add=0x02
>> clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x0000
>> clcs0: AC97 read prob. (DCV!=0) for add=0x18
>> clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x0808
>> clcs0: AC97 read prob. (DCV!=0) for add=0x1c
>> clcs0: AC97 write fail (DCV!=0) for add=0x1c data=0x0000
>> clcs0: AC97 read prob. (DCV!=0) for add=0x1a
>> clcs0: AC97 write fail (DCV!=0) for add=0x1a data=0x0000
>> piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02:
SpeedStep
>> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
>> channel 0 wired to compatibility, channel 1 wired to compatibility
>> wd0 at pciide0 channel 0 drive 0: <IC25N020ATDA04-0>
>> wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
>> atapiscsi0 at pciide0 channel 1 drive 0
>> scsibus0 at atapiscsi0: 2 targets
>> cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2512, 1115> ATAPI
>> 5/cdrom removable
>> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
>> uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
>> piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
>> iic0 at piixpm0
>> cardslot0 at cbb0 slot 0 flags 0
>> cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
>> pcmcia0 at cardslot0
>> cardslot1 at cbb1 slot 1 flags 0
>> cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0xb0
>> pcmcia1 at cardslot1
>> isa0 at piixpcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pms0 at pckbc0 (aux slot)
>> pckbc0: using irq 12 for aux slot
>> wsmouse0 at pms0 mux 0
>> pcppi0 at isa0 port 0x61
>> midi0 at pcppi0: <PC speaker>
>> spkr0 at pcppi0
>> lpt2 at isa0 port 0x3bc/4: polled
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> usb0 at uhci0: USB revision 1.0
>> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> biomask effd netmask effd ttymask ffff
>> mtrr: Pentium Pro MTRR support
>> umass0 at uhub0 port 1 configuration 1 interface 0 "AVM Berlin
>> FRITZ!WLAN USB Stick N" rev 2.00/4.03 addr 2
>> umass0: using ATAPI over Bulk-Only
>> scsibus1 at umass0: 2 targets, initiator 0
>> cd1 at scsibus1 targ 1 lun 0: <FRITI 5/cdrom removable
>> softraid0 at
>> OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
>> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
>> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 312 MHz
>> cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,S
SE
>> real mem = 267874304 (255MB)
>> avail mem = 250728448 (239MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 02/28/02, BIOS32 rev. 0 @
>> 0xfd820, SMBIOS rev. 2.3 @ 0xfff0000 (46 entries)
>> bios0: vendor IBM version "16ET29WW (1.09 )" date 02/28/2002
>> bios0: IBM 26474EG
>> apm0 at bios0: Power Management spec V1.2
>> apm0: AC on, battery charge unknown
>> acpi at bios0 function 0x0 not configured
>> pcibios0 at bios0: rev 2.1 @ 0xfd7b0/0x850
>> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/208 (11 entries)
>> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
>> pcibios0: PCI bus #5 is the last bus
>> bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800 0xdc000/0x4000!
0xe0000/0x10000
>> cpu0 at mainbus0: (uniprocessor)
>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
>> intelagp0 at pchb0
>> agp0 at intelagp0: aperture at 0xf8000000, size 0x4000000
>> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
>> pci1 at ppb0 bus 1
>> vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x13
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> cbb0 at pci0 dev 2 function 0 "TI PCI1450 CardBus" rev 0x03: irq 11
>> cbb1 at pci0 dev 2 function 1 "TI PCI1450 CardBus" rev 0x03: irq 11
>> fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x0c, i82550: irq 11,
>> address 00:03:47:7b:6d:1e
>> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
>> "AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 3 function 1 not configured
>> clcs0 at pci0 dev 5 function 0 "Cirrus Logic CS4280/46xx CrystalClear"
>> rev 0x01: irq 11
>> reset_codec: AC97 inputs slot ready timeout
>> clcs0: AC97 write fail (DCV!=0) for add=0x26 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x8000
>> clcs0: AC97 write fail (DCV!=0) for add=0x06 data=0x8000
>> clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x04 data=0x8000
>> clcs0: AC97 write fail (DCV!=0) for add=0x38 data=0x8080
>> clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
>> clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
>> clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
>> clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
>> clcs0: AC97 write fail (Dclcs0: AC97 write fail (DCV!=0) for add=0x0a
>> data=0x0000
>> clcs0: =0x0c data=0x8008
>> clcs0: AC97 write fail (DCV!=0) for add=0x0e data=0x8008
>> clcs0: AC97 write fail (DCV!=0) for add=0x0e data=0x8008
>> clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x10 data=0x8808
>> clcs0: AC97 write fail (DCV!=0) for add=0x12 data=0x8808
>> clcs0: AC97 write fail (DCV!=0) for add=0x14 dataDCV!=0) for add=0x16
>> data=0x8808
>> clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x8808
>> clcs0: AC97 write fail (DCV!=0) for add=0x1a data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x1c data=0x8000
>> clcs0: AC97 write fail (DCV!=0) for add=0x1e data=0x8000
>> clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x22 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x22 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x26 data=0x0000
>> clcs0: AC97 write fail (DCV!=0) for add=0x2a data=0x0000
>> clcs0: AC97 read prob. (DCV!=0) for add=0x7c
>> clcs0: AC97 read prob. (DCV!=0) for add=0x7e
>> clcs0: AC97 read prob. (DCV!=0) for add=0x00
>> ac97: codec id not read
>> clcs0: AC97 read prob. (DCV!=0) for add=0x28
>> clcs0: AC97 read prob. (DCV!=0) for add=0x02
>> clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x0000
>> clcs0: AC97 read prob. (DCV!=0) for add=0x18
>> clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x0808
>> clcs0: AC97 read prob. (DCV!=0) for add=0x1c
>> clcs0: AC97 write fail (DCV!=0) for add=0x1c data=0x0000
>> clcs0: AC97 read prob. (DCV!=0) for add=0x1a
>> clcs0: AC97 write fail (DCV!=0) for add=0x1a data=0x0000
>> piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02:
SpeedStep
>> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
>> channel 0 wired to compatibility, channel 1 wired to compatibility
>> wd0 at pciide0 channel 0 drive 0: <IC25N020ATDA04-0>
>> wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
>> atapiscsi0 at pciide0 channel 1 drive 0
>> scsibus0 at atapiscsi0: 2 targets
>> cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2512, 1115> ATAPI
>> 5/cdrom removable
>> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
>> uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
>> piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
>> iic0 at piixpm0
>> cardslot0 at cbb0 slot 0 flags 0
>> cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
>> pcmcia0 at cardslot0
>> cardslot1 at cbb1 slot 1 flags 0
>> cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0xb0
>> pcmcia1 at cardslot1
>> isa0 at piixpcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0ckbc0: using irq 12 for aux slot
>> wsmouse0 at pms0 mux 0
>> pcppi0 at isa0 port 0x61
>> midi0 at pgppi0: <PC speaker>
>> spkr0 at pcppi0
>> lpt2 at isa0 port 0x3bc/4: polled
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 drq 2
>> usb0 at uhci0: USB revision 1.0
>> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> biomask effd netmask effd ttymask ffff
>> mtrr: Pentium Pro MTRR support
>> softraid0 at root
>> root on wd0a swap on wd0b dump on wd0b
>> OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
>> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
>> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 504 MHz
>> cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,S
SE
>> real mem = 267874304 (255MB)
>> avail mem = 250728448 (239MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 02/28/02, BIOS32 rev. 0 @
>> 0xfd820, SMBIOS rev. 2.3 @ 0xfff0000 (46 entries)
>> bios0: vendor IBM version "16ET29WW (1.09 )" date 02/28/2002
>> bios0: IBM 26474EG
>> apm0 at bios0: Power Management spec V1.2
>> apm0: battery life expectancy 35%
>> apm0: AC off, battery charge high, estimated 0:28 hours
>> acpi at bios0 function 0x0 not configured
>> pcibios0 at bios0: rev 2.1 @ 0xfd7b0/0x850
>> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/208 (11 entries)
>> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
>> pcibios0: PCI bus #5 is the last bus
>> bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800 0xdc000/0x4000!
0xe0000/0x10000
>> cpu0 at mainbus0: (uniprocessor)
>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
>> intelagp0 at pchb0
>> agp0 at intelagp0: aperture at 0xf8000000, size 0x4000000
>> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
>> pci1 at ppb0 bus 1
>> vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x13
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> cbb0 at pci0 dev 2 function 0 "TI PCI1450 CardBus" rev 0x03: irq 11
>> cbb1 at pci0 dev 2 function 1 "TI PCI1450 CardBus" rev 0x03: irq 11
>> fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x0c, i82550: irq 11,
>> address 00:03:47:7b:6d:1e
>> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
>> "AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 3 function 1 not configured
>> clcs0 at pci0 dev 5 function 0 "Cirrus Logic CS4280/46xx CrystalClear"
>> rev 0x01: irq 11
>> ac97: codec id 0x43520000
>> ac97: codec features 20 bit DAC, 18 bit ADC, Creative
>> piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02:
SpeedStep
>> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
>> channel 0 wired to compatibility, channel 1 wired to compatibility
>> wd0 at pciide0 channel 0 drive 0: <IC25N020ATDA04-0>
>> wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
>> atapiscsi0 at pciide0 channel 1 drive 0
>> scsibus0 at atapiscsi0: 2 targets
>> cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2512, 1115> ATAPI
>> 5/cdrom removable
>> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
>> uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
>> piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
>> iic0 at piixpm0
>> cardslot0 at cbb0 slot 0 flags 0
>> cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
>> pcmcia0 at cardslot0
>> cardslot1 at cbb1 slot 1 flags 0
>> cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0xb0
>> pcmcia1 at cardslot1
>> isa0 at piixpcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pcppi0 at isa0 port 0x61
>> midi0 at pcppi0: <PC speaker>
>> spkr0 at pcppi0
>> lpt2 at isa0 port 0x3bc/4: polled
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> usb0 at uhci0: USB revision 1.0
>> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> biomask fffd netmask fffd ttymask ffff
>> mtrr: Pentium Pro MTRR support
>> softraid0 at root
>> root on wd0a swap on wd0b dump on wd0b
>> clcs0: firmware loaded
>> audio0 at clcs0
>> umass0 at uhub0 port 1 configuration 1 interface 0 "AVM Berlin
>> FRITZ!WLAN USB Stick N" rev 2.00/4.03 addr 2
>> umass0: using ATAPI over Bulk-Only
>> scsibus1 at umass0: 2 targets, initiator 0
>> cd1 at scsibus1 targ 1 lun 0: <FRITZ!, WLAN selfinstall, 1.00> ATAPI
>> 5/cdrom removable
>> cd1 detached
>> scsibus1 detached
>> umass0 detached
>> ugen0 at uhub0 port 1 "AVM Berlin FRITZ!WLAN USB Stick N" rev 2.00/4.03
addr 2
