I was given a AVM FRITZ!WLAN USB Stick N and I found some references to it in
a man page for otus driver (rel 1.3 and 1.4).
However searching the man pages
via openbsd.org I can't find any mention of a released otus driver at
least in 4.5 (as
per my official CD).
Also I noticed this line in the web page for changes between 4.5 and -current
"Enabled otus(4) on amd64 and i386 GENERIC kernels."
But clicking on the otus(4) link,
gives me Sorry, no data found for `otus(4)'.
Can anyone shed any light on what the odds are of getting this device working ?
If I plug it in to my old t22 Thinkpad (usb 1.1 I'm guessing) it
picks it up as a mass storage device
Thanks
uname 4.5 Generic 1749 i386
dmesg
SR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 267874304 (255MB)
avail mem = 250728448 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/28/02, BIOS32 rev. 0 @
0xfd820, SMBIOS rev. 2.3 @ 0xfff0000 (46 entries)
bios0: vendor IBM version "16ET29WW (1.09 )" date 02/28/2002
bios0: IBM 26474EG
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 46%
apm0: AC off, battery charge high, estimated 0:33 hours
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd7b0/0x850
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x13
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0 "TI PCI1450 CardBus" rev 0x03: irq 11
cbb1 at pci0 dev 2 function 1 "TI PCI1450 CardBus" rev 0x03: irq 11
fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x0c, i82550: irq 11,
address 00:03:47:7b:6d:1e
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 3 function 1 not configured
clcs0 at pci0 dev 5 function 0 "Cirrus Logic CS4280/46xx CrystalClear"
rev 0x01: irq 11
reset_codec: AC97 inputs slot ready timeout
clcs0: AC97 write fail (DCV!=0) for add=0x26 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x06 data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x04 data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x38 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x08 data=0x0f0f
clcs0: AC97 write fail (DCV!=0) for add=0x0a data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x0c data=0x8008
clcs0: AC97 write fail (DCV!=0) for add=0x0e data=0x8008
clcs0: AC97 write fail (DCV!=0) for add=0x0e data=0x8008
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x10 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x12 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x14 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x16 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x1a data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x1c data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x1e data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x22 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x22 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x26 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x2a data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x7c
clcs0: AC97 read prob. (DCV!=0) for add=0x7e
clcs0: AC97 read prob. (DCV!=0) for add=0x00
ac97: codec id not read
clcs0: AC97 read prob. (DCV!=0) for add=0x28
clcs0: AC97 read prob. (DCV!=0) for add=0x02
clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x18
clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x0808
clcs0: AC97 read prob. (DCV!=0) for add=0x1c
clcs0: AC97 write fail (DCV!=0) for add=0x1c data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x1a
clcs0: AC97 write fail (DCV!=0) for add=0x1a data=0x0000
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02: SpeedStep
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATDA04-0>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2512, 1115> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at piixpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask effd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 1 configuration 1 interface 0 "AVM Berlin
FRITZ!WLAN USB Stick N" rev 2.00/4.03 addr 2
umass0: using ATAPI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
cd1 at scsibus1 targ 1 lun 0: <FRITI 5/cdrom removable
softraid0 at
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 312 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 267874304 (255MB)
avail mem = 250728448 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/28/02, BIOS32 rev. 0 @
0xfd820, SMBIOS rev. 2.3 @ 0xfff0000 (46 entries)
bios0: vendor IBM version "16ET29WW (1.09 )" date 02/28/2002
bios0: IBM 26474EG
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd7b0/0x850
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x13
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0 "TI PCI1450 CardBus" rev 0x03: irq 11
cbb1 at pci0 dev 2 function 1 "TI PCI1450 CardBus" rev 0x03: irq 11
fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x0c, i82550: irq 11,
address 00:03:47:7b:6d:1e
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 3 function 1 not configured
clcs0 at pci0 dev 5 function 0 "Cirrus Logic CS4280/46xx CrystalClear"
rev 0x01: irq 11
reset_codec: AC97 inputs slot ready timeout
clcs0: AC97 write fail (DCV!=0) for add=0x26 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x06 data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x04 data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x38 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (Dclcs0: AC97 write fail (DCV!=0) for add=0x0a
data=0x0000
clcs0: =0x0c data=0x8008
clcs0: AC97 write fail (DCV!=0) for add=0x0e data=0x8008
clcs0: AC97 write fail (DCV!=0) for add=0x0e data=0x8008
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x10 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x12 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x14 dataDCV!=0) for add=0x16
data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x1a data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x1c data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x1e data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x22 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x22 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x26 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x2a data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x7c
clcs0: AC97 read prob. (DCV!=0) for add=0x7e
clcs0: AC97 read prob. (DCV!=0) for add=0x00
ac97: codec id not read
clcs0: AC97 read prob. (DCV!=0) for add=0x28
clcs0: AC97 read prob. (DCV!=0) for add=0x02
clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x18
clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x0808
clcs0: AC97 read prob. (DCV!=0) for add=0x1c
clcs0: AC97 write fail (DCV!=0) for add=0x1c data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x1a
clcs0: AC97 write fail (DCV!=0) for add=0x1a data=0x0000
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02: SpeedStep
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATDA04-0>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2512, 1115> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at piixpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0ckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pgppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask effd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 504 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 267874304 (255MB)
avail mem = 250728448 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/28/02, BIOS32 rev. 0 @
0xfd820, SMBIOS rev. 2.3 @ 0xfff0000 (46 entries)
bios0: vendor IBM version "16ET29WW (1.09 )" date 02/28/2002
bios0: IBM 26474EG
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 35%
apm0: AC off, battery charge high, estimated 0:28 hours
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd7b0/0x850
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x13
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0 "TI PCI1450 CardBus" rev 0x03: irq 11
cbb1 at pci0 dev 2 function 1 "TI PCI1450 CardBus" rev 0x03: irq 11
fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x0c, i82550: irq 11,
address 00:03:47:7b:6d:1e
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 3 function 1 not configured
clcs0 at pci0 dev 5 function 0 "Cirrus Logic CS4280/46xx CrystalClear"
rev 0x01: irq 11
ac97: codec id 0x43520000
ac97: codec features 20 bit DAC, 18 bit ADC, Creative
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02: SpeedStep
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATDA04-0>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2512, 1115> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at piixpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask fffd netmask fffd ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
clcs0: firmware loaded
audio0 at clcs0
umass0 at uhub0 port 1 configuration 1 interface 0 "AVM Berlin
FRITZ!WLAN USB Stick N" rev 2.00/4.03 addr 2
umass0: using ATAPI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
cd1 at scsibus1 targ 1 lun 0: <FRITZ!, WLAN selfinstall, 1.00> ATAPI
5/cdrom removable
cd1 detached
scsibus1 detached
umass0 detached
ugen0 at uhub0 port 1 "AVM Berlin FRITZ!WLAN USB Stick N" rev 2.00/4.03 addr 2
