The text on crypto.html was incorrect, support was added after 4.5 was tagged (but before May 1st). So try a -current snapshot.
I've corrected the wording to reflect this. Jonathan On Mon, May 11, 2009 at 08:16:13AM +0000, John Arnold wrote: > Hi All, > > I have a Silicom PESB62 card (based on Broadcom 5862 chip). > > www.openbsd.org/crypto.html says: > > "Support for the BCM5825, BCM5860, BCM5861, and BCM5862 including support for > AES with the BCM5823 or newer was added before 4.5." > > However it doesnt seem to be recognised properly: > > vendor "Broadcom", unknown product 0x5862 (class processor subclass Co- > processor, rev 0x01) at pci2 dev 0 function 0 not configured > > Any ideas what I'm doing wrong? > > Thanks! > > > > Full dmesg as follows: > > > OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz ("GenuineIntel" 686-class) > 2.83 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH, > DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS- > CPL,VMX,SMX,EST,TM2,CX16,xTPR > real mem = 3451457536 (3291MB) > avail mem = 3347947520 (3192MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 09/23/08, BIOS32 rev. 0 @ 0xffea0, > SMBIOS rev. 2.5 @ 0xf0450 (82 entries) > bios0: vendor Dell Inc. version "A01" date 09/23/2008 > bios0: Dell Inc. OptiPlex 960 > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET TCPA ____ SLIC SSDT > SSDT > SSDT SSDT SSDT > acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5) > PCI5(S5) PCI6(S5) KBD_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5 > (S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 332MHz > cpu at mainbus0: not configured > cpu at mainbus0: not configured > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 8 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 5 (PCI4) > acpiprt1 at acpi0: bus 3 (PCI2) > acpiprt2 at acpi0: bus 4 (PCI3) > acpiprt3 at acpi0: bus 1 (PCI1) > acpiprt4 at acpi0: bus -1 (PCI5) > acpiprt5 at acpi0: bus -1 (PCI6) > acpiprt6 at acpi0: bus 0 (PCI0) > acpicpu0 at acpi0: C1, FVS, 2833, 2333, 2000 MHz > acpibtn0 at acpi0: VBTN > bios0: ROM list: 0xc0000/0xc800! 0xcc800/0x2000! 0xce800/0x2800 > 0xd1000/0x5800 > 0xd6800/0x1800 > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03 > ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x2e11 rev > 0x03: > apic 8 int 16 (irq 11) > pci1 at ppb0 bus 1 > ppb1 at pci1 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc1 > pci2 at ppb1 bus 2 > vendor "Broadcom", unknown product 0x5862 (class processor subclass Co- > processor, rev 0x01) at pci2 dev 0 function 0 not configured > vga1 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0 at vga1: apic 8 int 16 (irq 11) > drm0 at inteldrm0 > "Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured > vendor "Intel", unknown product 0x2e14 (class communications subclass > miscellaneous, rev 0x03) at pci0 dev 3 function 0 not configured > pciide0 at pci0 dev 3 function 2 vendor "Intel", unknown product 0x2e16 rev > 0x03: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to > native-PCI > pciide0: using apic 8 int 18 (irq 9) for native-PCI interrupt > pciide0: channel 0 ignored (not responding; disabled or no drives?) > pciide0: channel 1 ignored (not responding; disabled or no drives?) > vendor "Intel", unknown product 0x2e17 (class communications subclass serial, > rev 0x03) at pci0 dev 3 function 3 not configured > "Intel ICH10 D BM LM" rev 0x02 at pci0 dev 25 function 0 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 8 int 16 > (irq 11) > uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 8 int 17 > (irq 5) > uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 8 int 22 > (irq 5) > ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 8 int 22 > (irq 5) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02: apic 8 > int 16 (irq 11) > azalia0: codecs: Analog Devices AD1984A > audio0 at azalia0 > ppb2 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02: apic 8 int 16 > (irq 11) > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 1 "Intel 82801JD PCIE" rev 0x02: apic 8 int 17 > (irq 5) > pci4 at ppb3 bus 4 > uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 8 int 23 > (irq 10) > uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 8 int 17 > (irq 5) > uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 8 int 18 > (irq 9) > ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 8 int 23 > (irq 10) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2 > pci5 at ppb4 bus 5 > pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02 > pciide1 at pci0 dev 31 function 2 "Intel 82801H RAID" rev 0x02: DMA, channel > 0 > wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 8 int 18 (irq 9) for native-PCI interrupt > "Intel 82801JD SMBus" rev 0x02 at pci0 dev 31 function 3 not configured > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > umass0 at uhub1 port 5 configuration 1 interface 0 " USB_DISK" rev 2.00/10.00 > addr 2 > umass0: using SCSI over Bulk-Only > scsibus0 at umass0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <, USB_DISK, 2.00> SCSI0 0/direct removable > sd0: 1851MB, 512 bytes/sec, 3790848 sec total > softraid0 at root > root on sd0a swap on sd0b dump on sd0b > umass1 at uhub1 port 6 configuration 1 interface 0 " USB_DISK" rev 2.00/10.00 > addr 3 > umass1: using SCSI over Bulk-Only > scsibus1 at umass1: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <, USB_DISK, 2.00> SCSI0 0/direct removable > sd1: 3900MB, 512 bytes/sec, 7987200 sec total