Hi All,
I have a Silicom PESB62 card (based on Broadcom 5862 chip).
www.openbsd.org/crypto.html says:
"Support for the BCM5825, BCM5860, BCM5861, and BCM5862 including support for
AES with the BCM5823 or newer was added before 4.5."
However it doesnt seem to be recognised properly:
vendor "Broadcom", unknown product 0x5862 (class processor subclass Co-
processor, rev 0x01) at pci2 dev 0 function 0 not configured
Any ideas what I'm doing wrong?
Thanks!
Full dmesg as follows:
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz ("GenuineIntel" 686-class)
2.83 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,
DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem = 3451457536 (3291MB)
avail mem = 3347947520 (3192MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/23/08, BIOS32 rev. 0 @ 0xffea0,
SMBIOS rev. 2.5 @ 0xf0450 (82 entries)
bios0: vendor Dell Inc. version "A01" date 09/23/2008
bios0: Dell Inc. OptiPlex 960
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET TCPA ____ SLIC SSDT SSDT
SSDT SSDT SSDT
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5)
PCI5(S5) PCI6(S5) KBD_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5
(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 5 (PCI4)
acpiprt1 at acpi0: bus 3 (PCI2)
acpiprt2 at acpi0: bus 4 (PCI3)
acpiprt3 at acpi0: bus 1 (PCI1)
acpiprt4 at acpi0: bus -1 (PCI5)
acpiprt5 at acpi0: bus -1 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1, FVS, 2833, 2333, 2000 MHz
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc0000/0xc800! 0xcc800/0x2000! 0xce800/0x2800 0xd1000/0x5800
0xd6800/0x1800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x2e11 rev 0x03:
apic 8 int 16 (irq 11)
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc1
pci2 at ppb1 bus 2
vendor "Broadcom", unknown product 0x5862 (class processor subclass Co-
processor, rev 0x01) at pci2 dev 0 function 0 not configured
vga1 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 8 int 16 (irq 11)
drm0 at inteldrm0
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
vendor "Intel", unknown product 0x2e14 (class communications subclass
miscellaneous, rev 0x03) at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 vendor "Intel", unknown product 0x2e16 rev
0x03: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 8 int 18 (irq 9) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
vendor "Intel", unknown product 0x2e17 (class communications subclass serial,
rev 0x03) at pci0 dev 3 function 3 not configured
"Intel ICH10 D BM LM" rev 0x02 at pci0 dev 25 function 0 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 8 int 16
(irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 8 int 17
(irq 5)
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 8 int 22
(irq 5)
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 8 int 22
(irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02: apic 8
int 16 (irq 11)
azalia0: codecs: Analog Devices AD1984A
audio0 at azalia0
ppb2 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02: apic 8 int 16
(irq 11)
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 1 "Intel 82801JD PCIE" rev 0x02: apic 8 int 17
(irq 5)
pci4 at ppb3 bus 4
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 8 int 23
(irq 10)
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 8 int 17
(irq 5)
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 8 int 18
(irq 9)
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 8 int 23
(irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801H RAID" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 8 int 18 (irq 9) for native-PCI interrupt
"Intel 82801JD SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub1 port 5 configuration 1 interface 0 " USB_DISK" rev 2.00/10.00
addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <, USB_DISK, 2.00> SCSI0 0/direct removable
sd0: 1851MB, 512 bytes/sec, 3790848 sec total
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
umass1 at uhub1 port 6 configuration 1 interface 0 " USB_DISK" rev 2.00/10.00
addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <, USB_DISK, 2.00> SCSI0 0/direct removable
sd1: 3900MB, 512 bytes/sec, 7987200 sec total
