Hi Alexander,
I was more than happy to dump the whole dmesg, but I just didn't want to put
too much into my first message.
Please find the full dmesg below:
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz ("GenuineIntel" 686-class)
2.54 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR
cpu0: unknown i686 EBL_CR_POWERON value 3 (0x424c0000)
real mem = 2010673152 (1917MB)
avail mem = 1935548416 (1845MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/02/08, BIOS32 rev. 0 @ 0xf1df0,
SMBIOS rev. 2.5 @ 0xf0000 (50 entries)
bios0: vendor Phoenix Technologies, LTD version "ASUS P5N-EM HDMI ACPI BIOS
Revision 0401" date 09/02/2008
bios0: ASUSTeK Computer INC. P5N-EM HDMI
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xde74
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfddb0/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xde00 0xd0000/0x4000! 0xd4000/0x1000
cpu0 at mainbus0
cpu0: EST: unknown system bus clock
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "NVIDIA", unknown product 0x07c1 rev
0xa2
"NVIDIA MCP73 Memory" rev 0xa2 at pci0 dev 0 function 1 not configured
"NVIDIA MCP73 Memory" rev 0xa1 at pci0 dev 1 function 0 not configured
"NVIDIA MCP73 Memory" rev 0xa1 at pci0 dev 1 function 1 not configured
"NVIDIA MCP73 Memory" rev 0xa1 at pci0 dev 1 function 2 not configured
"NVIDIA MCP73 Memory" rev 0xa1 at pci0 dev 1 function 3 not configured
"NVIDIA MCP73 Memory" rev 0xa1 at pci0 dev 1 function 4 not configured
"NVIDIA MCP73 Memory" rev 0xa1 at pci0 dev 1 function 5 not configured
"NVIDIA MCP73 Memory" rev 0xa1 at pci0 dev 1 function 6 not configured
"NVIDIA MCP73 Memory" rev 0xa1 at pci0 dev 2 function 0 not configured
pcib0 at pci0 dev 3 function 0 "NVIDIA MCP73 ISA" rev 0xa2
nviic0 at pci0 dev 3 function 1 "NVIDIA MCP73 SMBus" rev 0xa1
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
iic1 at nviic0
"NVIDIA MCP73 Memory" rev 0xa1 at pci0 dev 3 function 2 not configured
"NVIDIA MCP73 Memory" rev 0xa1 at pci0 dev 3 function 4 not configured
ohci0 at pci0 dev 4 function 0 "NVIDIA MCP73 USB" rev 0xa1: irq 10, version
1.0, legacy support
ehci0 at pci0 dev 4 function 1 "NVIDIA MCP73 USB" rev 0xa1: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 8 function 0 "NVIDIA MCP73 IDE" rev 0xa1: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3320620A>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd1 at pciide0 channel 0 drive 1: <ST3750640A>
wd1: 16-sector PIO, LBA48, 715404MB, 1465149168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
azalia0 at pci0 dev 9 function 0 "NVIDIA MCP73 HD Audio" rev 0xa1: irq 5
azalia0: /usr/src/sys/dev/pci/azalia.c/1348 invalid PCM format: 0x00000000
azalia0: codec[s]: Realtek ALC883, NVIDIA/0x8001, using Realtek ALC883
audio0 at azalia0
ppb0 at pci0 dev 10 function 0 "NVIDIA MCP73 PCIE" rev 0xa1
pci1 at ppb0 bus 1
rl0 at pci1 dev 5 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:40:f4:1d:22:8c
rlphy0 at rl0 phy 0: RTL internal PHY
em0 at pci1 dev 6 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: irq 11,
address 00:0e:0c:81:65:5a
ppb1 at pci0 dev 11 function 0 "NVIDIA MCP73 PCIE" rev 0xa1
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA MCP73 PCIE" rev 0xa1
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA MCP73 PCIE" rev 0xa1
pci4 at ppb3 bus 4
pciide1 at pci0 dev 14 function 0 "NVIDIA MCP73 AHCI" rev 0xa2: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd2 at pciide1 channel 0 drive 0: <ST31500341AS>
wd2: 16-sector PIO, LBA48, 1430799MB, 2930277168 sectors
atapiscsi0 at pciide1 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GH22NS30, 1.00> ATAPI
5/cdrom removable
pciide1: channel 1 ignored (not responding; disabled or no drives?)
nfe0 at pci0 dev 15 function 0 "NVIDIA MCP73 LAN" rev 0xa2: irq 15, address
00:1f:c6:dd:d3:64
rgephy0 at nfe0 phy 1: RTL8169S/8110S PHY, rev. 2
vga1 at pci0 dev 16 function 0 vendor "NVIDIA", unknown product 0x07e1 rev
0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
biomask 7f4d netmask ff4d ttymask ffdf
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
On Mon, Apr 20, 2009 at 4:49 PM, Alexander Hall <alexan...@beard.se> wrote:
> Syntic wrote:
> > Hi there,
> >
> > I recently installed OpenBSD on one of my servers and I have noticed that
> I
> > am experiencing slow SATA write speeds when using SMB to copy files
> across
> > my network.
> >
> > I currently have 1xSATA disk & 2xPATA disks in my server.
> > When I copy files across my network (GigE) to my PATA disk, I am seeing
> > approx 600Mbps, however when I copy to the SATA disk I only see approx
> > 125Mbps.
> > I also noticed that the CPU utilization (for SMBd) is at about 90% when
> > copying to the SATA disk, but only hovers around 10% when copying the
> PATA
> > disk.
> > I thought this may have been a driver issue with SATA, therefore causing
> the
> > increased CPU when copying. But I copied some files across to the same
> SATA
> > disk using FTP instead and the CPU stayed quite low and the write speeds
> > were approx 600Mbps.
> >
> > Does anybody have any ideas what may be causing the issues?
> >
> > I have provided some info from dmesg below which may be of use.
>
> sata disks normally (if not always) show up as sd's. You have 3 wd's.
> That makes me confused and lead to believe you might be running a very
> old OpenBSD version, something I cannot conclude from the partial dmesg
> you included. Since you obviously have some issues you do not know how
> to handle,
>
> ALWAYS INCLUDE THE ENTIRE DMESG
>
> and do not make any assumptions of what would be necessary or not.
>
> Cheers,
> Alexander
>
> >
> > cpu0: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz ("GenuineIntel"
> 686-class)
> > 2.54 GHz
> > bios0 at mainbus0: AT/286+ BIOS, date 09/02/08, BIOS32 rev. 0 @ 0xf1df0,
> > SMBIOS rev. 2.5 @ 0xf0000 (50 entries)
> > bios0: vendor Phoenix Technologies, LTD version "ASUS P5N-EM HDMI ACPI
> BIOS
> > Revision 0401" date 09/02/2008
> > bios0: ASUSTeK Computer INC. P5N-EM HDMI
> > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> > pciide0 at pci0 dev 8 function 0 "NVIDIA MCP73 IDE" rev 0xa1: DMA,
> channel 0
> > configured to compatibility, channel 1 configured to compatibility
> > pciide1 at pci0 dev 14 function 0 "NVIDIA MCP73 AHCI" rev 0xa2: DMA
> > (unsupported), channel 0 wired to native-PCI, channel 1 wired to
> native-PCI
> > wd0 at pciide0 channel 0 drive 0: <ST3320620A>
> > wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> > wd1 at pciide0 channel 0 drive 1: <ST3750640A>
> > wd1: 16-sector PIO, LBA48, 715404MB, 1465149168 sectors
> > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
> > wd2 at pciide1 channel 0 drive 0: <ST31500341AS>
> > wd2: 16-sector PIO, LBA48, 1430799MB, 2930277168 sectors
> >
> > Thanks,
> > Kristian
