On Wed, Apr 8, 2009 at 01:59, Brynet <bry...@gmail.com> wrote: >> WARNING: / was not properly unmounted >> Automatic boot in progress: starting file system checks. >> Can't open /dev/rsd0a: No medium found >> CAN'T CHECK FILE SYSTEM. >> /dev/rsd0a: UNEXPECTED INCONSISTENCY: RUN fsck_ffs MANUALLY. >> Automatic file system check failed: help! >> Enter pathname of shell or RETURN for sh:*blinking cursor* >> >> I actually got this error on a laptop that had the "AHCI" and "IDE" >> options for it's SATA connection. >> Once I changed it back to "AHCI" everything boots and file system >> check work as intended. > > Hi Bryan, (..we share the same first name!) > > This was obviously going to happen, your /etc/fstab file mentions sd0 > but when you switched to IDE mode ahci(4) would have been replaced by > pciide(4). > > Go back to AHCI mode and edit /etc/fstab, change all instances of sd0 > to wd0.. your system should then boot successfully, I also presume the > Windows issue is likely the same, it wanted to use an AHCI device but > only IDE devices were detected. > > I hope this helps, just remember to update /etc/fstab when you switch back.. > > -Brynet > >
NICE!!!! I'll try that... *5 minutes later* Damn... same thing. No error message when attempting to boot. I did another "ps", "trace", and "boot dump", I uploaded what I saw here: http://picasaweb.google.com/brakeb/31MarchOpenBSDIssue?feat=directlink I took screenshots of what happened after I made the BIOS changes from AHCI to IDE. They are 5, 6, 7, 8, and 9. The trace I did has something about UDFSPOOFLAYER, which looked interesting. I am including a new dmesg, since I noticed that the system uses PIO5, UDMA4 on the drive. This is different than when I use the AHCI, also, when I did the boot dump, the drive kept getting transfer errors, and dropping down to UDMA 4, then 3. Funny thing was, while it was doing this, I was able to press the button and eject the blu-ray disc. I don't believe it was mounted and locked. Regards, Bryan OpenBSD 4.5-current (GENERIC) #29: Tue Mar 31 09:58:34 MDT 2009 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR real mem = 3488837632 (3327MB) avail mem = 3384717312 (3227MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 10/23/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0xf06e0 (54 entries) bios0: vendor American Megatrends Inc. version "5.32" date 10/23/2008 bios0: HP-Pavilion FK484AV-ABA m9400t acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SLIC SSDT acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S3) PS2M(S3) USB0(S3) USB1(S3) USB2(S3) USB5(S3) EUSB(S3) USB3(S3) USB4(S3) USBE(S3) GBE_(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) SLPB(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 266MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P0P1) acpiprt2 at acpi0: bus 3 (P0P4) acpiprt3 at acpi0: bus -1 (P0P5) acpiprt4 at acpi0: bus 2 (P0P6) acpiprt5 at acpi0: bus -1 (P0P7) acpiprt6 at acpi0: bus -1 (P0P8) acpiprt7 at acpi0: bus -1 (P0P9) acpicpu0 at acpi0 acpibtn0 at acpi0: SLPB acpibtn1 at acpi0: PWRB bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 4 int 16 (irq 5) pci1 at ppb0 bus 5vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 9300 GE" rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 16 (irq 5) uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 21 (irq 10) ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 18 (irq 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 4 int 22 (irq 4) azalia0: codecs: Realtek ALC888 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 int 17 (irq 11) pci2 at ppb1 bus 3 ppb2 at pci2 dev 0 function 0 "Creative Labs PCIE-PCI" rev 0x00 pci3 at ppb2 bus 4 azalia1 at pci3 dev 0 function 0 "Creative Labs SoundBlaster X-Fi Xtreme" rev 0x00: apic 4 int 16 (irq 5) azalia1: codecs: Creative Labs/0x000a audio1 at azalia1 ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 4 int 18 (irq 10) pci4 at ppb3 bus 2 re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00), apic 4 int 18 (irq 10), address 00:23:54:3b:67:88 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 23 (irq 7) uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 19 (irq 3) uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 (irq 10) uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev 0x02: apic 4 int 16 (irq 5) ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 23 (irq 7) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci5 at ppb4 bus 1 puc0 at pci5 dev 0 function 0 "NetMos Nm9835" rev 0x01: ports: 1 com com3 at puc0 port 0 apic 4 int 17 (irq 11): ns16550a, 16 byte fifo ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 4 int 19 (irq 0) for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <WDC WD3200AAJS-65B4A0> wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4 int 18 (irq 10) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5 pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 4 int 19 (irq 3) for native-PCI interrupt atapiscsi0 at pciide1 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, BDDVDRW GGC-H20L, 1.03> ATAPI 5/cdrom removable cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 extent `pcimem' (0x0 - 0xffffffff), flags=0 0x0 - 0xefffffff 0xf8f00000 - 0xf8ffffff 0xf9ef8000 - 0xf9efbfff 0xf9eff400 - 0xf9effcff 0xf9f00000 - 0xfed03fff 0xfed14000 - 0xfed19fff 0xfeda0000 - 0xfedbffff 0xfee00000 - 0xfeefffff 0xffe00000 - 0xffffffff usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support umass0 at uhub1 port 5 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/51.95 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Generic-, SM/xD-Picture, 1.00> SCSI0 0/direct removable sd1: drive offline sd2 at scsibus1 targ 1 lun 2: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable sd2: drive offline sd3 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.00> SCSI0 0/direct removable sd3: drive offline uhidev0 at uhub1 port 5 configuration 1 interface 1 "Generic USB2.0-CRW" rev 2.00/51.95 addr 2 uhidev0: iclass 3/0 uhid0 at uhidev0: input=1, output=0, feature=0 softraid0 at root root on wd0a swap on wd0b dump on wd0b WARNING: / was not properly unmounted
