Marco Peereboom <sl...@peereboom.us> writes:
> we need the dmesg from the NOT working kernel.
Understood, however, I was not able to get a the serial console to
work.
Theo suggested I turn off acpi, which I did, and the 4.5 kernel
worked. I have a dmesg from the boot with ACPI turned off, perhaps it
will give someone a clue. I will continue to try and get the serial
console working so I can get a dmesg from the hanging kernel.
Here is is, WITH ACPI TURNED OFF:
OpenBSD 4.5-beta (GENERIC) #1: Sun Feb 15 15:29:46 CST 2009
r...@piracy.kokonino.net:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1072627712 (1022MB)
avail mem = 1029423104 (981MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0000 (39 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 01/19/2005
bios0: http://www.abit.com.tw/ AV8 (VIA K8T800P-8237)
acpi at bios0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 3500+, 2247.75 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD errata 86, 89, 97, 104 present, BIOS upgrade may be required
cpu0: apic clock running at 204MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type ISA
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 3, 24 pins
cpu0: Cool'n'Quiet K8 2247 MHz: speeds: 2200 2000 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x00
agp at pchb0 not configured
pchb1 at pci0 dev 0 function 1 "VIA K8HTB Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8HTB Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8HTB Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8HTB Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA K8HTB Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 9200 PRO" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 2 int 16 (irq 5)
drm0 at radeondrm0
"ATI Radeon 9200 PRO Sec" rev 0x01 at pci1 dev 0 function 1 not configured
"VIA VT6306 FireWire" rev 0x46 at pci0 dev 7 function 0 not configured
dc0 at pci0 dev 9 function 0 "Lite-On PNIC" rev 0x20: apic 2 int 17 (irq 11),
address 00:c0:f0:56:30:06
mtdphy0 at dc0 phy 1: MTD972 10/100 PHY, rev. 8
vge0 at pci0 dev 14 function 0 "VIA VT612x" rev 0x11: apic 2 int 22 (irq 10),
address 00:50:8d:d3:6b:86
ciphy0 at vge0 phy 1: CS8201 10/100/1000TX PHY, rev. 2
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using apic 2 int 20 (irq 11) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3160811AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <ST3160811AS>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8582, 0ACA> ATAPI 5/cdrom
removable
cd0(pciide1:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 (irq
5)
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 (irq
5)
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 (irq
11)
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 (irq
11)
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21 (irq
11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: apic 2 int 22 (irq
11)
ac97: codec id 0x414c4780 (Avance Logic ALC658 rev 0)
ac97: codec features 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auvia0
pchb6 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
wbsio0 port 0x290/2 not configured
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 3 configuration 1 interface 0 "JMicron USB to ATA/ATAPI
Bridge" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <WDC WD10, EACS-65D6B0, 1A01> SCSI2 0/direct fixed
sd0: 953869MB, 512 bytes/sec, 1953525168 sec total
umass1 at uhub0 port 4 configuration 1 interface 0 "Memorex 1394/USB 2.0 Drive"
rev 2.00/0.01 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
cd1 at scsibus2 targ 1 lun 0: <TSSTcorp, CD/DVDW SH-S182D, SB04> SCSI0 5/cdrom
removable
ugen0 at uhub1 port 2 "CPS UPS AE550" rev 1.10/0.01 addr 2
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
dc0: failed to force tx to idle state
