I was attempting to install a 4.5-beta kernel on my machine, which is
currently running an older 4.4 beta just fine. The 4.5 boot hands
immediately after
softraid0 at root
With some wdo (pciide0:0:0) ata timeout messages which I unfrotunately
cannot capture from that machine. I let it sit there for at least 15
minutes to see if it would get over it, maybe downgrading it's PIO
mode or something. It did not.
The messages looked something like:
wd0(pciide1:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
Any hints?
DMESG FROM WORKING KERNEL:
OpenBSD 4.4-beta (GENERIC) #1: Thu Jul 31 01:37:02 CDT 2008
r...@piracy.kokonino.net:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1060769792 (1011MB)
avail mem = 1029713920 (982MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0000 (39 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 01/19/2005
bios0: http://www.abit.com.tw/ AV8 (VIA K8T800P-8237)
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP BOOT APIC
acpi0: wakeup devices PCI0(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) AC97(S5) MC97(S5) UAR1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: PSS
acpibtn0 at acpi0: PWRB
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3500+, 2247.77 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD errata 86, 89, 97, 104 present, BIOS upgrade may be required
cpu0: Cool'n'Quiet K8 2247 MHz: speeds: 2200 2000 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA K8HTB Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8HTB Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8HTB Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8HTB Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA K8HTB Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 9200 PRO" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp at vga1 not configured
"ATI Radeon 9200 PRO Sec" rev 0x01 at pci1 dev 0 function 1 not configured
"VIA VT6306 FireWire" rev 0x46 at pci0 dev 7 function 0 not configured
dc0 at pci0 dev 9 function 0 "Lite-On PNIC" rev 0x20: irq 11, address
00:c0:f0:56:30:06
mtdphy0 at dc0 phy 1: MTD972 10/100 PHY, rev. 8
vge0 at pci0 dev 14 function 0 "VIA VT612x" rev 0x11: irq 10, address
00:50:8d:d3:6b:86
ciphy0 at vge0 phy 1: Cicada CS8201 10/100/1000TX PHY, rev. 2
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3160811AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <ST3160811AS>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8582, 0ACA> ATAPI 5/cdrom
removable
cd0(pciide1:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 5
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 5
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 11
ac97: codec id 0x414c4780 (Avance Logic ALC658 rev 0)
ac97: codec features 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auvia0
pchb6 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
wbsio0 port 0x290/2 not configured
nvram: invalid checksum
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 3 configuration 1 interface 0 "JMicron USB to ATA/ATAPI
Bridge" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <WDC WD10, EACS-65D6B0, 1A01> SCSI2 0/direct fixed
sd0: 953869MB, 121601 cyl, 255 head, 63 sec, 512 bytes/sec, 1953525168 sec total
umass1 at uhub0 port 4 configuration 1 interface 0 "Memorex 1394/USB 2.0 Drive"
rev 2.00/0.01 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
cd1 at scsibus2 targ 1 lun 0: <TSSTcorp, CD/DVDW SH-S182D, SB04> SCSI0 5/cdrom
removable
uhidev0 at uhub1 port 2 configuration 1 interface 0 "CPS UPS AE550" rev
1.10/0.01 addr 2
uhidev0: iclass 3/0, 24 report ids
uhid0 at uhidev0 reportid 1: input=0, output=0, feature=1
uhid1 at uhidev0 reportid 2: input=0, output=0, feature=1
uhid2 at uhidev0 reportid 3: input=0, output=0, feature=1
uhid3 at uhidev0 reportid 4: input=0, output=0, feature=1
uhid4 at uhidev0 reportid 5: input=0, output=0, feature=1
uhid5 at uhidev0 reportid 6: input=0, output=0, feature=1
uhid6 at uhidev0 reportid 7: input=0, output=0, feature=6
uhid7 at uhidev0 reportid 8: input=5, output=0, feature=5
uhid8 at uhidev0 reportid 9: input=0, output=0, feature=1
uhid9 at uhidev0 reportid 10: input=0, output=0, feature=1
uhid10 at uhidev0 reportid 11: input=1, output=0, feature=1
uhid11 at uhidev0 reportid 12: input=0, output=0, feature=1
uhid12 at uhidev0 reportid 13: input=0, output=0, feature=1
uhid13 at uhidev0 reportid 14: input=0, output=0, feature=1
uhid14 at uhidev0 reportid 15: input=0, output=0, feature=1
uhid15 at uhidev0 reportid 16: input=0, output=0, feature=2
uhid16 at uhidev0 reportid 18: input=0, output=0, feature=1
uhid17 at uhidev0 reportid 20: input=0, output=0, feature=1
uhid18 at uhidev0 reportid 21: input=0, output=0, feature=1
uhid19 at uhidev0 reportid 22: input=0, output=0, feature=1
uhid20 at uhidev0 reportid 24: input=0, output=0, feature=2
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
dc0: failed to force tx and rx to idle state
--
Sincerely, Craig Brozefsky <cr...@red-bean.com>
