Hi there,
I just installied tentakel tentakel-2.1.2p1 using python-2.5.2p4 on
OpenBSD 4.4 GENERIC#1021 i386. When I call this utility I get the
following error message:
$ tentakel
Traceback (most recent call last):
File "/usr/local/bin/tentakel", line 94, in <module>
conf.load(configfile)
File "/usr/obj/i386/tentakel-2.1.2p1/fake-i386/usr/local/lib/
python2.5/site-packages/lekatnet/config.py", line 163, in load
File "/usr/obj/i386/tentakel-2.1.2p1/fake-i386/usr/local/lib/
python2.5/site-packages/lekatnet/config.py", line 155, in parse
File "/usr/obj/i386/tentakel-2.1.2p1/fake-i386/usr/local/lib/
python2.5/site-packages/lekatnet/tpg.py", line 921, in __call__
File "/usr/obj/i386/tentakel-2.1.2p1/fake-i386/usr/local/lib/
python2.5/site-packages/lekatnet/tpg.py", line 934, in parse
File "<string>", line 8, in START
File "<string>", line 5, in SETTING
File "<string>", line 15, in PARAM
File "/usr/obj/i386/tentakel-2.1.2p1/fake-i386/usr/local/lib/
python2.5/site-packages/lekatnet/tpg.py", line 986, in extract
TypeError: object cannot be interpreted as an index
I found this post to openbsd-security, but I'm not able to install
neither python-2.4.4p4 or python-2.4.4p6 (from 4.2 / 4.3 packages) on
my (4.4) system:
http://archives.neohapsis.com/archives/openbsd/2007-10/1567.html
$ sudo pkg_add python-2.4.4p6.tgz
Can't install python-2.4.4p6: lib not found c.43.0
c.43.0: partial match in /usr/lib: major=48, minor=0 (bad major)
Can't install python-2.4.4p6: lib not found crypto.13.0
crypto.13.0: partial match in /usr/lib: major=14, minor=0 (bad major)
Can't install python-2.4.4p6: lib not found m.2.3
m.2.3: partial match in /usr/lib: major=3, minor=0 (bad major)
Can't install python-2.4.4p6: lib not found pthread.9.0
pthread.9.0: partial match in /usr/lib: major=11, minor=0 (bad major)
Can't install python-2.4.4p6: lib not found stdc++.44.0
stdc++.44.0: partial match in /usr/lib: major=45, minor=0 (bad major)
Any idea how to get tentakel running?
dmesg below.
Regards,
Falk
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU - S 1400MHz ("GenuineIntel" 686-
class) 1.40 GHz
cpu0:
FPU
,V86
,DE
,PSE
,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1073250304 (1023MB)
avail mem = 1029357568 (981MB)
User Kernel Config
UKC> disable acpi
429 acpi0 disabled
UKC> di\^H \^H\^H \^Hboot
Unknown command, try help
UKC> exit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/01/03, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.3 @ 0xfb240 (47 entries)
bios0: vendor Dell Computer Corporation version "A10" date 05/01/2003
bios0: Dell Computer Corporation PowerEdge 1650
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc220/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x6000
0xcf000/0x600 0xec000/0x4000!
ipmi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
pci1 at pchb0 bus 1
em0 at pci1 dev 2 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02:
irq 7, address 00:0b:db:90:e6:67
em1 at pci1 dev 4 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02:
irq 5, address 00:0b:db:90:e6:68
ahc0 at pci1 dev 6 function 0 "Adaptec AIC-7899 U160" rev 0x01: irq 11
scsibus0 at ahc0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <QUANTUM, ATLAS10K3_18_SCA, 120G> SCSI3
0/direct fixed
sd0: 17366MB, 31022 cyl, 2 head, 573 sec, 512 bytes/sec, 35566478 sec
total
safte0 at scsibus0 targ 6 lun 0: <PE/PV, 1x3 SCSI BP, 0.29> SCSI2 3/
processor fixed
ahc1 at pci1 dev 6 function 1 "Adaptec AIC-7899 U160" rev 0x01: irq 7
scsibus1 at ahc1: 16 targets, initiator 7
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
pci2 at pchb3 bus 2
"Dell DRAC 4 Embedded/Optional" rev 0x00 at pci0 dev 8 function 0 not
configured
puc0 at pci0 dev 8 function 1 "Dell DRAC 3 Virtual UART" rev 0x00:
ports: 1 com
com3 at puc0 port 0 irq 7: ns16550a, 16 byte fifo
com3: probed fifo depth: 0 bytes
"Dell DRAC 3 Embedded/Optional" rev 0x00 at pci0 dev 8 function 2 not
configured
fxp0 at pci0 dev 10 function 0 "Intel 8255x" rev 0x0d, i82550: irq 11,
address 00:02:b3:ed:94:75
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci0 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 512MB SDRAM registered ECC PC133CL2
spdmem1 at iic0 addr 0x51: 512MB SDRAM registered ECC PC133CL2
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus2 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N102> ATAPI 5/
cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05:
irq 3, version 1.0, legacy support
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffcd netmask ffed ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
root on sd0a swap on sd0b dump on sd0b
