IFAIK nv X.org driver supports only following resolutions:

2048x1536
1920x1440
1836x1392
1792x1344
1600x1200
1400x1050
1280x1024
1280x960
1152x864
1152x768
1024x768
960x720
928x696
896x672
832x624
800x600
700x525
640x512
640x480
720x400
640x400
576x432
640x350
576x384
512x384
416x312
400x300
320x240
360x200
320x200
320x175

so you cannot use 1920x1200 with this nVidia card driver.
To use 1600x1200 (or some other resolution) you should edit /etc/X11/xorg.conf.
An example from my configuration

<-- cut here -->
Section "Monitor"
    Identifier  "SyncMaster959NF"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5-110

#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 85-150

EndSection

Section "Device"
    Identifier  "GeForceFX5700"
    Driver      "nv"
    #VideoRam    131072
    # Insert Clocks lines here if appropriate
EndSection

Section "Screen"
    Identifier  "Screen 1"
    Device      "GeForceFX5700"
    Monitor     "SyncMaster959NF"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1600x1200"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1600x1200"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1600x1200"
        ViewPort    0 0
    EndSubsection
EndSection
<-- cut here -->

My SB Audigy 2 Value 7.1 card works fine only with 4.4-current kernel
but not with the stable kernel. I can hear sound from all speakers on
my 7.1 system. But I still not cheched is there 5.1 -> 7.1 mapping for
DVD movies or 5.1 -> 2.0 -> 7.1 with elimination of all surround
effects.

Reply via email to