ddb> trace
Debugger(d39d1c58,d2ab5300,4,e1bc0cfc,d39d1c00) at Debbugger+0x4
panic(d06f5e16,d39d1c78,d2ab5300,0,0) at panic+0x55
rtfree(e1bc0cfc,30,0,d2ab5300) at rtfree+0xbd
route_output(d9898000,d9783c70,0,df75fd50,d0202dd5) at route_output+0x341
raw_usrreq(d9783c70,9,d9898000,0,0) at raw_usrreq+0xf2
route_usrreq(d9783c70,9,d9898000,0,0) at route_usrreq+0xe8
sosend(d9783c70,0,df75fea8,d9898000,0) at sosend+0x357
soo_write(d977f424,d977f440,df75fea8,d992c000) at soo_write+0x1c
dofilewritev(d990ada0,6,d997f424,cfbecfc0,5) at dofilewritev+0xeb
sys_writev(d990ada0,df75ff68,df75ff58,cfbecfc0,d990ada0) at
sys_writev+0x47
syscall() at syscall+0x24e
--- syscall (number 121) ---
0x74ba3d5
ddb>
I did run ps and notice some particular things (I'm too exhausted to
retype everything from the picture):
PID PPID PGRP UID S FLAGS WAIT COMMAND
6790 6286 6286 75 3 0x180 poll bgpd
7389 6286 6286 75 2 0x100 bgpd
*6286 1 6286 0 7 0 bgpd
Of course, it's not happen if bgpd is not running and I consciusly
ifconfig-ed em0 to down. But, if I keep bgpd running and ifconfig-ed em0
to down, nothing happen until I ifconfig-ed em0 to up, it went panic with
the same messages. I hope this could helps all of us. Thanks a lot for
everything, I hope I could help more. I also sendbug-ed the messages.
Below is the dmesg.
OpenBSD 4.4-current (GENERIC) #1: Sun Jan 11 23:23:00 WIT 2009
r...@greenbridge.mygreenlinks.net:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error d<fixed_disk,invalid_time>
cpu0: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz ("GenuineIntel" 686-class) 3
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem = 2143842304 (2044MB)
avail mem = 2064748544 (1969MB)
RTC BIOS diagnostic error d<fixed_disk,invalid_time>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/12/07, SMBIOS rev. 2.5 @
0x7fdfd000 (63 entries)
bios0: vendor Intel Corporation version
"S3200X38.86B.00.00.0045.082820081329" date 08/28/2008
bios0: Intel Corporation S3210SH
acpi0 at bios0: rev 2
acpi0: tables DSDT SLIC FACP APIC WDDT MCFG HPET SPCR SSDT SSDT SSDT SSDT
SSDT HEST BERT ERST EINJ DMAR
acpi0: wakeup devices SLPB(S5) NPE1(S5) NPE6(S5) P32_(S5) PS2M(S1)
PS2K(S1) ILAN(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(
S5) PEX5(S5) UHC1(S1) UHC2(S1) UHC3(S1) UHC4(S1) EHCI(S1) EHC2(S1)
UH42(S1) UHC5(S1) UHC6(S1) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 5
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (NPE1)
acpiprt2 at acpi0: bus -1 (NPE6)
acpiprt3 at acpi0: bus 3 (P32_)
acpiprt4 at acpi0: bus 1 (PEX0)
acpiprt5 at acpi0: bus -1 (PEX1)
acpiprt6 at acpi0: bus -1 (PEX2)
acpiprt7 at acpi0: bus -1 (PEX3)
acpiprt8 at acpi0: bus 2 (PEX4)
acpiprt9 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: FVS, 3000, 2000 MHz
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x00
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: apic 5 int
20
(irq 11), address 00:15:17:28:2a:d3
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 5 int
18
(irq 9)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 5 int
21
(irq 10)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 5 int
17
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 5 int
17
(irq 11)
pci1 at ppb0 bus 1
em1 at pci1 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic
5 int 16 (irq 11), address 00:15:17:86:53:14
em2 at pci1 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic
5 int 17 (irq 10), address 00:15:17:86:53:15
ppb1 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 5 int
17
(irq 11)
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 5 int
23
(irq 11)
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 5 int
19
(irq 11)
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 5 int
18
(irq 9)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 5 int
23
(irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci3 at ppb2 bus 3
skc0 at pci3 dev 0 function 0 "D-Link Systems DGE-530T B1" rev 0x11,
Yukon
Lite (0x9): apic 5 int 16 (irq 11)
sk0 at skc0 port A: address 00:1c:f0:0f:4d:05
eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5
skc1 at pci3 dev 1 function 0 "D-Link Systems DGE-530T B1" rev 0x11,
Yukon
Lite (0x9): apic 5 int 17 (irq 10)
sk1 at skc1 port A: address 00:1c:f0:d1:a3:5d
eephy1 at sk1 phy 0: 88E1011 Gigabit PHY, rev. 5
em3 at pci3 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic
5
int 18 (irq 9), address 00:15:17:28:2a:d1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 5 int 21 (irq 10) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <MAXTOR STM380215AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 5
int 18 (irq 9)
iic0 at ichiic0
iic0: skipping sensors to avoid ipmi0 interactions
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 5 int 21 (irq 10) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
Best Regards,
Insan
