On Sunday 30 November 2008 04:02:33 Paco Esteban wrote:
> On Sat, Nov 29, 2008 at 17:43, Kostas Zorbadelos <[EMAIL PROTECTED]> wrote:
> > On Tuesday 11 November 2008 22:55:49 Brynet wrote:
I just wanted to tell you that I opened a bug report for this issue identified
by
system/6022: Dim console after exiting X with ATI radeon 9200 PRO chip
Was anyone able to overcome this (apart from DefaultDepth 16 which did not
work for me)?
> >> Hi Ed,
> >>
> >> I've also seen this behaviour on a OptiPlex GX240, it has a ATI Rage
> >> 128 Pro TF card, the only solution I've found is to change the depth
> >> to 16 instead of the default 24.
> >>
> >> Just add "DefaultDepth 16" to your Screen section.
> >>
> >> I would like to hear an alternative solution, but I can't seem to tell
> >> the different between the two depths.
> >>
> >> Hope that helps.. :-)
> >>
> >> -Brynet
> >
> > Hello,
> >
> > I also see this behaviour in my system after clean installation of
> > OpenBSD 4.4. I didn't see this in previous versions. Here is my dmesg, I
> > run amd64. Please let me know if I can provide any more information to
> > track down the problem. Iwill try to upgrade to current in the next day
> > and see if the problem is present there. The workarounf DefaultDepth 16
> > did not work for me.
> >
> > Kostas
>
> Same issue in my old i386 with ATI Radeon 9600 XT, following stable.
> My dmesg:
>
> OpenBSD 4.4-stable (GENERIC) #1: Sat Nov 29 18:10:44 CET 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD Athlon(tm) XP ("AuthenticAMD" 686-class, 256KB L2 cache) 1.02 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
> X,FXSR,SSE
> real mem = 536375296 (511MB)
> avail mem = 510218240 (486MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/20/04, BIOS32 rev. 0 @ 0xfdb10,
> SMBIOS rev. 2.3 @ 0xf0630 (21 entries)
> bios0: vendor American Megatrends Inc. version "P1.70" date 08/20/2004
> bios0: American Megatrends Inc. K7S41
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP APIC
> acpi0: wakeup devices PS2M(S4) PS2K(S4) UAR1(S4) USB1(S4) USB2(S4) EHCI(S4)
> LAN_ (S4) MDM_(S4) AUD_(S4) PCI0(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0
> acpibtn0 at acpi0: PWRB
> bios0: ROM list: 0xc0000/0xd000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03
> ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Radeon 9600 XT" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> agp0 at vga1: aperture at 0xd0000000, size 0x4000000
> drm at vga1 unsupported
> "ATI Radeon 9600 XT Sec" rev 0x00 at pci1 dev 0 function 1 not configured
> pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
> pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 741: DMA,
> channel 0 w ired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <ST380215A>
> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets, initiator 7
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8164B, 0L06> ATAPI
> 5/cdrom r emovable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 10, SiS7012
> AC97 ac97: codec id 0x434d4983 (C-Media Electronics CMI9761A+)
> audio0 at auich0
> ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 10,
> version 1.0 , legacy support
> ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 3, version
> 1.0, legacy support
> ehci0 at pci0 dev 3 function 2 "SiS 7002 USB" rev 0x00: irq 5
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
> sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x90: irq 10,
> address 0 0:0b:6a:b3:60:3a
> rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
> lm1 at wbsio0 port 0x290/8: W83697HF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> usb2 at ohci1: USB revision 1.0
> uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> biomask ed6d netmask ed6d ttymask ffff
> mtrr: Pentium Pro MTRR support
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> auich0: measured ac97 link rate at 48005 Hz, will use 48000 Hz
