On Tuesday 11 November 2008 22:55:49 Brynet wrote:
> Hi Ed,
>
> I've also seen this behaviour on a OptiPlex GX240, it has a ATI Rage
> 128 Pro TF card, the only solution I've found is to change the depth
> to 16 instead of the default 24.
>
> Just add "DefaultDepth 16" to your Screen section.
>
> I would like to hear an alternative solution, but I can't seem to tell
> the different between the two depths.
>
> Hope that helps.. :-)
>
> -Brynet
Hello,
I also see this behaviour in my system after clean installation of OpenBSD
4.4. I didn't see this in previous versions. Here is my dmesg, I run amd64.
Please let me know if I can provide any more information to track down the
problem. Iwill try to upgrade to current in the next day and see if the
problem is present there. The workarounf DefaultDepth 16 did not work for me.
Kostas
OpenBSD 4.4 (GENERIC) #1562: Tue Aug 12 17:15:53 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1060466688 (1011MB)
avail mem = 1029414912 (981MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0100 (38 entries)
bios0: vendor Award Software International, Inc. version "F5" date 12/21/2004
bios0: Gigabyte Technology Co., Ltd. nForce
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices HUB0(S5) HUB1(S4) USB0(S3) USB1(S3) USB2(S3) F139(S3)
MMAC(S5) MMCI(S5) UAR1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (HUB0)
acpiprt2 at acpi0: bus 1 (AGPB)
acpiprt3 at acpi0: bus -1 (HUB1)
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 1809.01 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 113 detected and fixed
cpu0: AMD erratum 89 present, BIOS upgrade may be required
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce3 250 PCI Host" rev 0xa1
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce3 250 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce3 250 SMBus" rev 0xa1
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC3200CL2.5
iic1 at nviic0
iic1: addr 0x4e 01=06 02=10 03=72 05=80 06=0f 0a=dd 0e=e0 0f=ff words 00=00ff
01=06ff 02=10ff 03=72ff 04=00ff 05=80ff 06=0fff 07=00ff
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce3 250 USB" rev 0xa1: irq 9,
version 1.0, legacy support
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce3 250 USB" rev 0xa1: irq 9,
version 1.0, legacy support
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce3 250 USB2" rev 0xa2: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
nfe0 at pci0 dev 5 function 0 "NVIDIA nForce3 LAN" rev 0xa2: irq 5, address
00:0f:ea:ed:13:01
icsphy0 at nfe0 phy 1: ICS1893 10/100 PHY, rev. 1
auich0 at pci0 dev 6 function 0 "NVIDIA nForce3 250 AC97" rev 0xa1: irq 10,
nForce3 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850 rev 0)
audio0 at auich0
pciide0 at pci0 dev 8 function 0 "NVIDIA nForce3 250 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-3540A, 1.01> ATAPI 5/cdrom
removable
atapiscsi1 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi1: 2 targets, initiator 7
cd1 at scsibus1 targ 0 lun 0: <TEAC, DV-516G, F4S3> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 10 function 0 "NVIDIA nForce3 250 SATA" rev 0xa2: DMA
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3160812AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ppb0 at pci0 dev 11 function 0 "NVIDIA nForce3 250 AGP" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 9200 PRO" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp at vga1 not configured
drm at vga1 unsupported
"ATI Radeon 9200 PRO Sec" rev 0x01 at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 14 function 0 "NVIDIA nForce3 250 PCI-PCI" rev 0xa2
pci2 at ppb1 bus 2
skc0 at pci2 dev 11 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x13,
Yukon Lite (0x9): irq 9
sk0 at skc0 port A: address 00:0f:ea:ed:13:03
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
pciide2 at pci2 dev 13 function 0 "CMD Technology SiI3512 SATA" rev 0x01: DMA
pciide2: using irq 10 for native-PCI interrupt
"TI TSB82AA2 FireWire" rev 0x01 at pci2 dev 14 function 0 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8712F rev 0x05, EC port 0x290
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 4 configuration 1 interface 0 "Logitech USB Receiver"
rev 1.10/38.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 4 configuration 1 interface 1 "Logitech USB Receiver"
rev 1.10/38.10 addr 2
uhidev1: iclass 3/1, 17 report ids
ums0 at uhidev1 reportid 2: 8 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
auich0: measured ac97 link rate at 47992 Hz, will use 48000 Hz
