Hello is it possible to have both Compact Flash and Hard disk in this soekris at the same time?
when i do, i have most of the time, errors from disk/controller or else like: * pciide0:0:0: setmulti error (4) wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying pciide0:0:0: setmulti error (4) wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying pciide0:0:0: setmulti error (4) wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying pciide0:0:0: setmulti error (4) wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying pciide0:0:0: setmulti error (4) wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying pciide0:0:0: setmulti error (4) wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0) pciide0:0:0: setmulti error (4) wd0c: aborted command reading fsbn 64 of 64-67 (wd0 bn 64; cn 0 tn 1 sn 1), retrying pciide0:0:0: setmulti error (4) (non-blocking errors when launching bsd.rd though pxe) * > boot 800^H ^H Using drive 0, partition 3. Loading... ERR M * or some others variants. i try by letting soekris choose where to boot or asking `boot 80` or `boot 81`. In my case (sandisk 2G), CF seems to be 81 (not found when both installed) and hard disk (wd1600beve [1]) seems to be 80 (freeze or previous boot error) If i only use one disk, it's ok to install and used. Please note, i have updated bios to latest 1.33 Please confirm me, it's not possible. Else ,i would think i have a problem with the soekris :( thanks Regards [1] http://wdc-fr.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1281
