On Sat, Nov 15, 2008 at 04:25:49AM +0000, Bryan wrote: > Greetings, > > I just inherited a Dell Inspiron 1520 a few days ago, and I was eager > to install -current on it. I installed the November 6th snapshot. > Sadly, I found that this laptop uses the azalia(4) driver. (my > Inspiron 9300 uses auich(4) ). > > So far, I can hear audio in my headphones, and saw the mixerctl switch > headphone outputs when I plug in headphones. Still can't get the > microphone to work,
some hints in your mixerctl below > and I still have not been able to hear music from > the CD player. the CD pin isn't connected on this audio codec. use 'cdio cdplay'. > I saw on the daily changelog that the S/PDIF has been applied, but was > not sure of the other patches... there are more coming ... even if your device starts working, please keep testing patches to make sure it doesn't stop working ;) > I noticed that the replies given have HD Audio cards that are > different than mine. MIne has the following for output: > > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: > apic 2 int 21 (irq 9) > azalia0: codecs: Sigmatel/0x76a0, Conexant/0x2c06, using Sigmatel/0x76a0 > audio0 at azalia0 this is an STAC9205. http://www.idt.com/index.cfm?genID=STAC9205 > # mixerctl -av > outputs.headphones.sour=dac [ dac dac2 ] > outputs.headphones.dir=output [ input output ] > outputs.headphones.boos=off [ off on ] > outputs.line.source=dac [ dac dac2 ] > outputs.line.dir=input [ input output ] > outputs.speaker.dir=input [ input output ] > outputs.speaker.boost=off [ off on ] you probably want to set outputs.{line,speaker}.dir=output > inputs.dac.mute=off [ off on ] > inputs.dac=160,160 > inputs.dac2.mute=off [ off on ] > inputs.dac2=126,126 > inputs.sel.source=headphones [ line speaker headphones ] > outputs.sel=126,126 > inputs.sel2.source= [ line speaker headphones ] > outputs.sel2=252,252 > inputs.sel3.sel=119,119 > inputs.sel4.sel2=119,119 > inputs.sel5.source=sel3 [ sel3 mic ] > outputs.sel5.mute=off [ off on ] > inputs.sel6.source=sel4 [ sel4 mic ] inputs.sel{5,6}.source=mic > outputs.sel6.mute=off [ off on ] > inputs.beep=85 > outputs.volume=254 > inputs.usingdac=10 [ 10 11 1f ] > record.usingadc=12 [ 12 13 20 ] > outputs.master=160,160 > inputs.dac=160,160 > -- [EMAIL PROTECTED] SDF Public Access UNIX System - http://sdf.lonestar.org
