On Oct 21, 2008, at 8:01 PM, Alexey Suslikov wrote:
> Stephane Lapie wrote:
>
>> Hello,
>>
>> I am currently working with a Portwell NAR-5530 (network appliance
>> running off Intel hardware, can use regular HDs or CF cards as boot
>> device).
>>
>> We want to use this at work for network appliances, but end up
>> bumping in the following problem : the kernel detects any device
>> plugged to the controller (SATA or CF) as UltraDMA-5, even though the
>> BIOS specifies otherwise clearly.
>
> You definitely should try to install recent snapshot on a CF
> card and boot GENERIC.MP with APM disabled since that
> box may mis-behave on interrupts without APCI.
>
> Issue "bsd.mp -c" in UKC than "disable apm" and "exit".
Since the Intel controller got two modes (Enhanced, which
successfully activates, but provokes issues with wd0 being recognized
as UDMA5 ; Compatible, which can't allocate properly an IRQ, probably
due to an ACPI issue), I tried booting with both modes :
Here is the dmesg trace for a bsd.mp kernel (I'll build a full
fledged MP based ramdisk once I confirm this works) in Enhanced mode :
OpenBSD 4.4-current (GENERIC.MP) #937: Sat Oct 18 21:14:41 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-
class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2138324992 (2039MB)
avail mem = 2059100160 (1963MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/15/07, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.4 @ 0xfbc30 (27 entries)
bios0: vendor American Megatrends Inc. version "080014" date 03/15/2007
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG OEMB GSCI
acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S4) USB1(S4) USB2(S4)
USB3(S4) EUSB(S4) USB4(S4) USB5(S4) USBE(S4) GBE_(S4) P0P4(S4) P0P5
(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-
class) 2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,EST,TM2,CX16,xTPR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-
class) 2.40 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,EST,TM2,CX16,xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-
class) 2.40 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P0P1)
acpiprt2 at acpi0: bus 1 (P0P4)
acpiprt3 at acpi0: bus 2 (P0P5)
acpiprt4 at acpi0: bus 3 (P0P6)
acpiprt5 at acpi0: bus 4 (P0P7)
acpiprt6 at acpi0: bus 5 (P0P8)
acpiprt7 at acpi0: bus 6 (P0P9)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82Q965 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82Q965 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1 Intel i965Q(0), 1.6.0 20080312
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 4
int 16 (irq 10)
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 4 int 16 (irq 10), address 00:90:fb:12:b4:6d
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: apic 4
int 17 (irq 11)
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 4 int 17 (irq 11), address 00:90:fb:12:b4:6e
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: apic 4
int 18 (irq 5)
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 4 int 18 (irq 5), address 00:90:fb:12:b4:6f
ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: apic 4
int 19 (irq 15)
pci4 at ppb3 bus 4
em3 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 4 int 19 (irq 15), address 00:90:fb:12:b4:70
ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 4
int 16 (irq 10)
pci5 at ppb4 bus 5
em4 at pci5 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 4 int 16 (irq 10), address 00:90:fb:12:b4:71
ppb5 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x02: apic 4
int 17 (irq 11)
pci6 at ppb5 bus 6
em5 at pci6 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 4 int 17 (irq 11), address 00:90:fb:12:b4:72
uhci0 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 4
int 23 (irq 14)
uhci1 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 4
int 19 (irq 15)
ehci0 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 4
int 23 (irq 14)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci7 at ppb6 bus 7
em6 at pci7 dev 12 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05:
apic 4 int 16 (irq 10), address 00:90:fb:12:b4:73
em7 at pci7 dev 13 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05:
apic 4 int 17 (irq 11), address 00:90:fb:12:b4:74
em8 at pci7 dev 14 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05:
apic 4 int 18 (irq 5), address 00:90:fb:12:b4:75
ichpcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 4 int 19 (irq 15) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFH2-002G>
wd0: 4-sector PIO, LBA, 1953MB, 4001760 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic
4 int 18 (irq 15)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5
pciide1 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 4 int 19 (irq 15) for native-PCI interrupt
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x63
lm1 at wbsio0 port 0xa10/8: W83627EHF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub3 at uhub1 port 2 "Mitsumi Electric Hub in Apple Extended USB
Keyboard" rev 1.10/4.10 addr 2
uhidev0 at uhub3 port 3 configuration 1 interface 0 "Mitsumi Electric
Apple Extended USB Keyboard" rev 1.10/4.10 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 3 configuration 1 interface 1 "Mitsumi Electric
Apple Extended USB Keyboard" rev 1.10/4.10 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 0 "Mitsumi Electric
Apple Optical USB Mouse" rev 1.10/1.08 addr 4
uhidev2: iclass 3/1
ums0 at uhidev2: 4 buttons, Z and W dir
wsmouse0 at ums0 mux 0
softraid0 at root
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0),
retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0),
retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0),
retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0),
retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0),
retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0)
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 64 of 64-67 (wd0 bn 64; cn 0 tn 1
sn 1), retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 64 of 64-67 (wd0 bn 64; cn 0 tn 1
sn 1), retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 64 of 64-67 (wd0 bn 64; cn 0 tn 1
sn 1), retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 64 of 64-67 (wd0 bn 64; cn 0 tn 1
sn 1), retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 64 of 64-67 (wd0 bn 64; cn 0 tn 1
sn 1), retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 64 of 64-67 (wd0 bn 64; cn 0 tn 1
sn 1)
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 1024 of 1024-1027 (wd0 bn 1024; cn
0 tn 16 sn 16), retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 1024 of 1024-1027 (wd0 bn 1024; cn
0 tn 16 sn 16), retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 1024 of 1024-1027 (wd0 bn 1024; cn
0 tn 16 sn 16), retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 1024 of 1024-1027 (wd0 bn 1024; cn
0 tn 16 sn 16), retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 1024 of 1024-1027 (wd0 bn 1024; cn
0 tn 16 sn 16), retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 1024 of 1024-1027 (wd0 bn 1024; cn
0 tn 16 sn 16)
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0),
retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0),
retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0),
retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0),
retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0),
retrying
pciide0:0:0: dmamode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0)
Here is for the Compatible mode, even though it still fails detection :
OpenBSD 4.4-current (GENERIC.MP) #937: Sat Oct 18 21:14:41 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-
class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,EST,TM2,CX16,xTPR
real mem = 2138324992 (2039MB)
avail mem = 2059100160 (1963MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/15/07, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.4 @ 0xfbc30 (27 entries)
bios0: vendor American Megatrends Inc. version "080014" date 03/15/2007
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG OEMB GSCI
acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S4) USB1(S4) USB2(S4)
USB3(S4) EUSB(S4) USB4(S4) USB5(S4) USBE(S4) GBE_(S4) P0P4(S4) P0P5
(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-
class) 2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,EST,TM2,CX16,xTPR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-
class) 2.40 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,EST,TM2,CX16,xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-
class) 2.40 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P0P1)
acpiprt2 at acpi0: bus 1 (P0P4)
acpiprt3 at acpi0: bus 2 (P0P5)
acpiprt4 at acpi0: bus 3 (P0P6)
acpiprt5 at acpi0: bus 4 (P0P7)
acpiprt6 at acpi0: bus 5 (P0P8)
acpiprt7 at acpi0: bus 6 (P0P9)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82Q965 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82Q965 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1 Intel i965Q(0), 1.6.0 20080312
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 4
int 16 (irq 10)
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 4 int 16 (irq 10), address 00:90:fb:12:b4:6d
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: apic 4
int 17 (irq 11)
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 4 int 17 (irq 11), address 00:90:fb:12:b4:6e
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: apic 4
int 18 (irq 5)
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 4 int 18 (irq 5), address 00:90:fb:12:b4:6f
ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: apic 4
int 19 (irq 7)
pci4 at ppb3 bus 4
em3 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 4 int 19 (irq 7), address 00:90:fb:12:b4:70
ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 4
int 16 (irq 10)
pci5 at ppb4 bus 5
em4 at pci5 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 4 int 16 (irq 10), address 00:90:fb:12:b4:71
ppb5 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x02: apic 4
int 17 (irq 11)
pci6 at ppb5 bus 6
em5 at pci6 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 4 int 17 (irq 11), address 00:90:fb:12:b4:72
uhci0 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 4
int 23 (irq 6)
uhci1 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 4
int 19 (irq 7)
ehci0 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 4
int 23 (irq 6)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci7 at ppb6 bus 7
em6 at pci7 dev 12 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05:
apic 4 int 16 (irq 10), address 00:90:fb:12:b4:73
em7 at pci7 dev 13 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05:
apic 4 int 17 (irq 11), address 00:90:fb:12:b4:74
em8 at pci7 dev 14 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05:
apic 4 int 18 (irq 5), address 00:90:fb:12:b4:75
ichpcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 4 int 19 (irq 0) for native-PCI interrupt
pciide0: couldn't map channel 0 cmd regs
pciide0: couldn't map channel 1 cmd regs
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic
4 int 18 (irq 7)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x63
lm1 at wbsio0 port 0xa10/8: W83627EHF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub3 at uhub1 port 2 "Mitsumi Electric Hub in Apple Extended USB
Keyboard" rev 1.10/4.10 addr 2
uhidev0 at uhub3 port 3 configuration 1 interface 0 "Mitsumi Electric
Apple Extended USB Keyboard" rev 1.10/4.10 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 3 configuration 1 interface 1 "Mitsumi Electric
Apple Extended USB Keyboard" rev 1.10/4.10 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 0 "Mitsumi Electric
Apple Optical USB Mouse" rev 1.10/1.08 addr 4
uhidev2: iclass 3/1
ums0 at uhidev2: 4 buttons, Z and W dir
wsmouse0 at ums0 mux 0
softraid0 at root
PXE boot MAC address 00:90:fb:12:b4:6d, interface em0
--
Stephane LAPIE
Email: [EMAIL PROTECTED]
Phone: +81 (0)42 319 5164
