I think the problem I'm having is different as 4.2-RELEASE works like a
charm. Again, copying a few gig worth files from say sd1h to sd0h locks
up the 1750's using 4.3-RELEASE up to last night's snap. Both Dell 1750's
have the non-RAID controller (dmesg from an older snap attached). Anything
I can try before reverting to 4.2-RELEASE?
many thanks,
-rick
On Sat, 28 Jun 2008, Marco Peereboom wrote:
That is fixed in 4.3 or in -current not sure if it made the previous
release.
On Sat, Jun 28, 2008 at 10:17:02AM +0200, Torsten Frost wrote:
I have a few machines with the same behavior. The boxes run fine
unless you tax them with
things like unpacking ports, du on a large tree or dd'ng some
/dev/zero to disk. The 1950 can route 400mbit
ethernet with no problems for weeks if you don't mess with the disks,
so i guess the hardware is
reasonably unbroken.
Broken hardware or some driver/chipset issue?
Dell 1950 with a PERC5 raid1 SATA 160gb mirror. 4.2-RELEASE
A 300mb dd write makes an unkillable process. Outputs a few "sd0: not
queued, error 5" lines.
Recently flashed the card to the latest firmware. Behaves somewhat better.
Happens with a single drive too.
Needs rebooting to be able to write to the
drive after it has started to behave.
Takes forever to unpack ports.tar.gz, i aborted the unpacking after 20
minutes and about 100mb unpacked.
Is at least stable, doesn't die, just writes to the disk really slow.
Like previous poster, unkillable processes and weird behaviour. Needs
rebooting to be able to write to the
drive after it has started to behave.
-----
Dell 1750 scsi
Our two 1750 scsi boxes works good though. Doesn't seem to crash from dd.
-----
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.39 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1073147904 (1023MB)
avail mem = 1029640192 (981MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/13/04, BIOS32 rev. 0 @ 0xffe90, SMBIOS
rev. 2.3 @ 0xfb320 (56 entries)
bios0: vendor Dell Computer Corporation version "A07" date 01/13/2004
bios0: Dell Computer Corporation PowerEdge 1750
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices RTC_(S5) PCI0(S5) PCI3(S5) PCI2(S5) PCI1(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (PCI4)
acpiprt2 at acpi0: bus 3 (PCI3)
acpiprt3 at acpi0: bus 2 (PCI2)
acpiprt4 at acpi0: bus 1 (PCI1)
acpicpu0 at acpi0
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xec000/0x4000!
ipmi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci1 at pchb1 bus 1
fxp0 at pci1 dev 4 function 0 "Intel 8255x" rev 0x0d, i82550: irq 7, address
00:02:b3:f0:4c:b5
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci2 at pchb2 bus 3
vga1 at pci0 dev 14 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: SMBus disabled
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 11,
version 1.0, legacy support
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
pchb3 at pci0 dev 16 function 0 "ServerWorks CIOB-E" rev 0x12
pchb4 at pci0 dev 16 function 2 "ServerWorks CIOB-E" rev 0x12
pci3 at pchb4 bus 2
bge0 at pci3 dev 0 function 0 "Broadcom BCM5704C" rev 0x02, BCM5704 A2
(0x2002): irq 5, address 00:0f:1f:66:01:40
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 0 function 1 "Broadcom BCM5704C" rev 0x02, BCM5704 A2
(0x2002): irq 7, address 00:0f:1f:66:01:41
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
pchb5 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
pchb6 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
pci4 at pchb6 bus 4
mpi0 at pci4 dev 5 function 0 "Symbios Logic 53c1030" rev 0x07: irq 5
scsibus1 at mpi0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <FUJITSU, MAP3735NC, 5608> SCSI3 0/direct fixed
sd0: 70007MB, 47996 cyl, 4 head, 746 sec, 512 bytes/sec, 143374650 sec total
sd1 at scsibus1 targ 1 lun 0: <FUJITSU, MAP3735NC, 5608> SCSI3 0/direct fixed
sd1: 70007MB, 47996 cyl, 4 head, 746 sec, 512 bytes/sec, 143374650 sec total
sd2 at scsibus1 targ 2 lun 0: <FUJITSU, MAP3735NC, 5608> SCSI3 0/direct fixed
sd2: 70007MB, 47996 cyl, 4 head, 746 sec, 512 bytes/sec, 143374650 sec total
safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x3 SCSI BP, 1.1> SCSI2 3/processor
fixed
mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
mpi0: target 2 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
mpi1 at pci4 dev 5 function 1 "Symbios Logic 53c1030" rev 0x07: irq 7
scsibus2 at mpi1: 16 targets
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fded netmask fded ttymask ffef
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Generic USB+PS2 Keyboard"
rev 1.10/2.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Generic USB+PS2 Keyboard"
rev 1.10/2.02 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
