I answered the mfi question. I have not had time to analyze the mpi
question.
On Mon, Jun 30, 2008 at 02:28:46PM -0400, Rick Aliwalas wrote:
> I think the problem I'm having is different as 4.2-RELEASE works like a
> charm. Again, copying a few gig worth files from say sd1h to sd0h locks
> up the 1750's using 4.3-RELEASE up to last night's snap. Both Dell 1750's
> have the non-RAID controller (dmesg from an older snap attached). Anything
> I can try before reverting to 4.2-RELEASE?
>
> many thanks,
> -rick
>
> On Sat, 28 Jun 2008, Marco Peereboom wrote:
>
> > That is fixed in 4.3 or in -current not sure if it made the previous
> > release.
> >
> > On Sat, Jun 28, 2008 at 10:17:02AM +0200, Torsten Frost wrote:
> >> I have a few machines with the same behavior. The boxes run fine
> >> unless you tax them with
> >> things like unpacking ports, du on a large tree or dd'ng some
> >> /dev/zero to disk. The 1950 can route 400mbit
> >> ethernet with no problems for weeks if you don't mess with the disks,
> >> so i guess the hardware is
> >> reasonably unbroken.
> >>
> >>
> >> Broken hardware or some driver/chipset issue?
> >>
> >>
> >> Dell 1950 with a PERC5 raid1 SATA 160gb mirror. 4.2-RELEASE
> >>
> >> A 300mb dd write makes an unkillable process. Outputs a few "sd0: not
> >> queued, error 5" lines.
> >>
> >>
> >> Recently flashed the card to the latest firmware. Behaves somewhat better.
> >>
> >> Happens with a single drive too.
> >>
> >> Needs rebooting to be able to write to the
> >> drive after it has started to behave.
> >> Takes forever to unpack ports.tar.gz, i aborted the unpacking after 20
> >> minutes and about 100mb unpacked.
> >> Is at least stable, doesn't die, just writes to the disk really slow.
> >> Like previous poster, unkillable processes and weird behaviour. Needs
> >> rebooting to be able to write to the
> >> drive after it has started to behave.
> >>
> >> -----
> >>
> >> Dell 1750 scsi
> >>
> >> Our two 1750 scsi boxes works good though. Doesn't seem to crash from dd.
> >>
> >> -----
> OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.39 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> real mem = 1073147904 (1023MB)
> avail mem = 1029640192 (981MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 01/13/04, BIOS32 rev. 0 @ 0xffe90,
> SMBIOS rev. 2.3 @ 0xfb320 (56 entries)
> bios0: vendor Dell Computer Corporation version "A07" date 01/13/2004
> bios0: Dell Computer Corporation PowerEdge 1750
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP APIC SPCR
> acpi0: wakeup devices RTC_(S5) PCI0(S5) PCI3(S5) PCI2(S5) PCI1(S5)
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 4 (PCI4)
> acpiprt2 at acpi0: bus 3 (PCI3)
> acpiprt3 at acpi0: bus 2 (PCI2)
> acpiprt4 at acpi0: bus 1 (PCI1)
> acpicpu0 at acpi0
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xec000/0x4000!
> ipmi at mainbus0 not configured
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
> pci1 at pchb1 bus 1
> fxp0 at pci1 dev 4 function 0 "Intel 8255x" rev 0x0d, i82550: irq 7, address
> 00:02:b3:f0:4c:b5
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
> pci2 at pchb2 bus 3
> vga1 at pci0 dev 14 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: SMBus disabled
> pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 11,
> version 1.0, legacy support
> pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
> pchb3 at pci0 dev 16 function 0 "ServerWorks CIOB-E" rev 0x12
> pchb4 at pci0 dev 16 function 2 "ServerWorks CIOB-E" rev 0x12
> pci3 at pchb4 bus 2
> bge0 at pci3 dev 0 function 0 "Broadcom BCM5704C" rev 0x02, BCM5704 A2
> (0x2002): irq 5, address 00:0f:1f:66:01:40
> brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
> bge1 at pci3 dev 0 function 1 "Broadcom BCM5704C" rev 0x02, BCM5704 A2
> (0x2002): irq 7, address 00:0f:1f:66:01:41
> brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
> pchb5 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
> pchb6 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
> pci4 at pchb6 bus 4
> mpi0 at pci4 dev 5 function 0 "Symbios Logic 53c1030" rev 0x07: irq 5
> scsibus1 at mpi0: 16 targets
> sd0 at scsibus1 targ 0 lun 0: <FUJITSU, MAP3735NC, 5608> SCSI3 0/direct fixed
> sd0: 70007MB, 47996 cyl, 4 head, 746 sec, 512 bytes/sec, 143374650 sec total
> sd1 at scsibus1 targ 1 lun 0: <FUJITSU, MAP3735NC, 5608> SCSI3 0/direct fixed
> sd1: 70007MB, 47996 cyl, 4 head, 746 sec, 512 bytes/sec, 143374650 sec total
> sd2 at scsibus1 targ 2 lun 0: <FUJITSU, MAP3735NC, 5608> SCSI3 0/direct fixed
> sd2: 70007MB, 47996 cyl, 4 head, 746 sec, 512 bytes/sec, 143374650 sec total
> safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x3 SCSI BP, 1.1> SCSI2 3/processor
> fixed
> mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> mpi0: target 2 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> mpi1 at pci4 dev 5 function 1 "Symbios Logic 53c1030" rev 0x07: irq 7
> scsibus2 at mpi1: 16 targets
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask fded netmask fded ttymask ffef
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub0 port 3 configuration 1 interface 0 "Generic USB+PS2
> Keyboard" rev 1.10/2.02 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub0 port 3 configuration 1 interface 1 "Generic USB+PS2
> Keyboard" rev 1.10/2.02 addr 2
> uhidev1: iclass 3/0, 2 report ids
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
