Re-post in misc@ (sorry for posting wrongly before)
-----------------
Encountered the following: 4.3 i386 MP kernel w/Raidframe
- throws a: splassert: uvm_map_p: want 1 have 1
Here's what was going on.......
We took a USB 250GB drive and wiped it (unallocated partition) using
partition magic on one of those, what do you call it..
..oh yeah...WindowsXP thingys...(expedient, ok?)
Then plugged it into a 4.3 OpenBSD MacMini, did a disklabel and
established a partition sd0i of type MSDOS.
Then did a newfs t msdos sd0i.
All of this works great, each time we do it.
Then mounted it on the MacMini 4.3 OpenBSD with no problems, so
we were fairly sure it was OK.
We unmounted it from the 4.3 OpenBSD MacMini and cruised on over to
a Dell PowerEdge 1550 Dual-P3, 512MB with 2 QLogic Fibre channel boards
with two arrays, all set up nicely with Raidframe - each array as RAID5 and
both arrays mirrored as a RAID1. This configuration has been in use for
quite some time and works quite well (although a recent disk
replacement requires some attention..)
We mounted the USB drive (configured as above) without issue.
Kicked off a "cp /big_file_of_4GB to /usb_drive_mount_point" job
and it ran for about an hour before issuing a kernal error...
splassert: uvm_map_p: want 1 have 1
... to the console.
The 'cp' was wedged, but the system seemed to be running.
We were able to ssh into the system and look around, but issuing
a 'reboot' from the ssh session caused the system to hang
completely after the shutdown messages to the console - and
somewhere in the 'syncing' before halt portion.
So, before we go poking around in this MP system and perhaps
retrace well worn steps ... has anyone seen this on an MP
configuration (with or without Raidframe) ?
Randy
------
Here is the current DMESG, but please realize it's just now recovering
from our 'force crash / reset' so there is some noise from the Raid stuff
at the end.
Also, note that the sd7 & sd8 disks are NOT part of any array.
They are the boot / swap and /usr/src /usr/ports drives on this puppy.
And, finally, this raidframe setup, with these disks have been
working for over a year on a 4.1 version system. Just so you know.
----
wally:randy {103} ssh [EMAIL PROTECTED]
[EMAIL PROTECTED]'s password:
Last login: Wed Jul 16 16:09:56 2008 from 10.1.0.170
OpenBSD 4.3 (GENERIC.MP) #2: Tue Jul 1 13:45:45 EDT 2008
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
Terminal type? [vt220]
# dmesg
OpenBSD 4.3 (GENERIC.MP) #2: Tue Jul 1 13:45:45 EDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 994 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536379392 (511MB)
avail mem = 510132224 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/10/04, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.3 @ 0xfb060 (55 entries)
bios0: vendor Dell Computer Corporation version "A09" date 12/10/2004
bios0: Dell Computer Corporation PowerEdge 1550/1000
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices PCI0(S5) PCI2(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 994 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiprt2 at acpi0: bus 2 (PCI2)
acpicpu0 at acpi0
acpicpu1 at acpi0
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x6000 0xce000/0x2800 0xd0800/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
pci1 at pchb0 bus 1
isp0 at pci1 dev 4 function 0 "QLogic ISP2100" rev 0x03: apic 3 int 9
(irq 5)
scsibus0 at isp0: 256 targets
sd0 at scsibus0 targ 0 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd0: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
sd1 at scsibus0 targ 1 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd1: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
sd2 at scsibus0 targ 2 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd2: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
sd3 at scsibus0 targ 3 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd3: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
sd4 at scsibus0 targ 4 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd4: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
sd5 at scsibus0 targ 5 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd5: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
sd6 at scsibus0 targ 6 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd6: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
pci2 at pchb3 bus 2
ahc0 at pci2 dev 5 function 0 "Adaptec AIC-7899 U160" rev 0x01: apic 3
int 11 (irq 3)
scsibus1 at ahc0: 16 targets
sd7 at scsibus1 targ 0 lun 0: <COMPAQ, BD0366349C, 3B02> SCSI2 0/direct
fixed
sd7: 34732MB, 14002 cyl, 20 head, 254 sec, 512 bytes/sec, 71132000 sec total
sd8 at scsibus1 targ 1 lun 0: <SEAGATE, ST318451LC, 0003> SCSI3 0/direct
fixed
sd8: 17366MB, 10377 cyl, 10 head, 342 sec, 512 bytes/sec, 35566478 sec total
safte0 at scsibus1 targ 6 lun 0: <DELL, 1x3 U2W SCSI BP, 1.21> SCSI2
3/processor fixed
ahc1 at pci2 dev 5 function 1 "Adaptec AIC-7899 U160" rev 0x01: apic 3
int 12 (irq 11)
scsibus2 at ahc1: 16 targets
isp1 at pci2 dev 6 function 0 "QLogic ISP2100" rev 0x03: apic 3 int 13
(irq 10)
scsibus3 at isp1: 256 targets
sd9 at scsibus3 targ 0 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd9: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
sd10 at scsibus3 targ 1 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd10: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
sd11 at scsibus3 targ 2 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd11: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
sd12 at scsibus3 targ 3 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd12: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
sd13 at scsibus3 targ 4 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd13: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
sd14 at scsibus3 targ 5 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd14: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
sd15 at scsibus3 targ 6 lun 0: <CSC 36GB, 15K REFURBISHED, 0026> SCSI3
0/direct fixed
sd15: 35003MB, 50824 cyl, 2 head, 705 sec, 512 bytes/sec, 71687372 sec total
fxp0 at pci0 dev 1 function 0 "Intel 8255x" rev 0x08, i82559: apic 3 int
0 (irq 11), address 00:b0:d0:f3:6f:de
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci0 dev 2 function 0 "Intel 8255x" rev 0x08, i82559: apic 3 int
1 (irq 10), address 00:b0:d0:f3:6f:df
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x50: SMI
iic0 at piixpm0
admtemp0 at iic0 addr 0x18: max1617
lmenv0 at iic0 addr 0x2c: lm81 rev 3
lmenv1 at iic0 addr 0x2d: lm81 rev 3
lmenv2 at iic0 addr 0x2e: lm81 rev 3
maxtmp0 at iic0 addr 0x4c: max6657
lmtemp0 at iic0 addr 0x4d: lm75
iic0: addr 0x4e 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
08=0000 09=0000 0a=0000 0b=0000 0c=0000 0d=0000 0e=0000 0f=0000
spdmem0 at iic0 addr 0x50: unknown memory type 208
spdmem1 at iic0 addr 0x51: unknown memory type 208
spdmem2 at iic0 addr 0x52: unknown memory type 208
spdmem3 at iic0 addr 0x53: unknown memory type 208
spdmem4 at iic0 addr 0x54: unknown memory type 208
spdmem5 at iic0 addr 0x55: unknown memory type 208
spdmem6 at iic0 addr 0x56: unknown memory type 208
spdmem7 at iic0 addr 0x57: unknown memory type 208
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus4 at atapiscsi0: 2 targets
cd0 at scsibus4 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, S003> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x04:
apic 2 int 7 (irq 7), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
Kernelized RAIDframe activated
softraid0 at root
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x3f
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x3f
root on sd7a swap on sd7b dump on sd7b
WARNING: / was not properly unmounted
raid0: Component /dev/sd0a being configured at row: 0 col: 0
Row: 0 Column: 0 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 238
Clean: No Status: 0
/dev/sd0a is not clean !
raid0: Component /dev/sd1a being configured at row: 0 col: 1
Row: 0 Column: 1 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 238
Clean: No Status: 0
/dev/sd1a is not clean !
raid0: Component /dev/sd2a being configured at row: 0 col: 2
Row: 0 Column: 2 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 238
Clean: No Status: 0
/dev/sd2a is not clean !
raid0: Component /dev/sd3a being configured at row: 0 col: 3
Row: 0 Column: 3 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 238
Clean: No Status: 0
/dev/sd3a is not clean !
raid0: Component /dev/sd4a being configured at row: 0 col: 4
Row: 0 Column: 4 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 238
Clean: No Status: 0
/dev/sd4a is not clean !
raid0: Component /dev/sd5a being configured at row: 0 col: 5
Row: 0 Column: 5 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 238
Clean: No Status: 0
/dev/sd5a is not clean !
raid0: Component /dev/sd6a being configured at row: 0 col: 6
Row: 0 Column: 6 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 238
Clean: No Status: 0
/dev/sd6a is not clean !
raid0 at rootraid1: Component /dev/sd9a being configured at row: 0 col: 0
Row: 0 Column: 0 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 188
Clean: No Status: 0
/dev/sd9a is not clean !
raid1: Component /dev/sd10a being configured at row: 0 col: 1
Row: 0 Column: 1 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 188
Clean: No Status: 0
/dev/sd10a is not clean !
raid1: Component /dev/sd11a being configured at row: 0 col: 2
Row: 0 Column: 2 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 188
Clean: No Status: 0
/dev/sd11a is not clean !
raid1: Component /dev/sd12a being configured at row: 0 col: 3
Row: 0 Column: 3 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 188
Clean: No Status: 0
/dev/sd12a is not clean !
raid1: Component /dev/sd13a being configured at row: 0 col: 4
Row: 0 Column: 4 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 188
Clean: No Status: 0
/dev/sd13a is not clean !
raid1: Component /dev/sd14a being configured at row: 0 col: 5
Row: 0 Column: 5 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 188
Clean: No Status: 0
/dev/sd14a is not clean !
raid1: Component /dev/sd15a being configured at row: 0 col: 6
Row: 0 Column: 6 Num Rows: 1 Num Columns: 7
Version: 2 Serial Number: 1234 Mod Counter: 188
Clean: No Status: 0
/dev/sd15a is not clean !
raid1 at rootHosed component: /dev/raid1a.
Hosed component: /dev/raid1a.
raid2: Component /dev/raid0a being configured at row: 0 col: 0
Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 1234 Mod Counter: 321
Clean: No Status: 0
/dev/raid0a is not clean !
raid2: Ignoring /dev/raid1a.
raid2 at rootraid2: Error re-writing parity!
[demime 1.01d removed an attachment of type APPLICATION/DEFANGED which had a
name of randy.7484DEFANGED-vcf]
