> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf Of Tomas Bodzar
> Sent: Friday, July 04, 2008 1:05 AM
> To: misc@openbsd.org
> Subject: 4.3 constantly hangs on MS Virtual Server
>
> Hi all,
>
> I'm trying to setup 4.3 release on MS Virtual Server 1.1.603.0 EE
> R2 SP1.
> Booting from cd-rom,but I always stop on:
>
> ahc0: at pci0 dev11 function 0 "Adaptec AIC-7870" rev 0x02: irq 11
> ahc0: Host Adapter Bios disabled. Using default SCSI device
> parameters
>
> Using VMRCplus 1.6.0.0 for communication with MS VS.
> I can't go in BIOS -> no reactions on Del key.
> Amibios 2001
> BIOS Date: 02/22/06 Ver: 08.00.02
> Adaptec SCSI BIOS V3.10
>
> There are two other problems in dmesg:
>
> acpi at bios0 function 0x0 not configured
> pcibios at bios0 function 0x1a not configured
> bios0: ROM list: 0xc0000/0xc000! 0xcc000/0x800
> .
> .
> .
> "Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not
> configured
>
> Don't depend if HDD is on SCSI or IDE.CDROM is set on IDE,but in
> dmesg
> is on scsibus0.
>
Works fine with IDE hard drive for me.
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz ("GenuineIntel" 686-class) 1 GHz
cpu0: FPU,V86,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,ACPI,MMX,FXSR,SSE,SSE2
real mem = 66613248 (63MB)
avail mem = 55336960 (52MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/20/05, SMBIOS rev. 2.3 @ 0xf8cc0 (39
entries)
bios0: vendor American Megatrends Inc. version "080002" date 09/20/2005
bios0: Microsoft Corporation Virtual Machine
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xc000! 0xcc000/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x03
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to
compatibility
wd0 at pciide0 channel 0 drive 0: <Virtual HD>
wd0: 128-sector PIO, LBA, 2047MB, 4194288 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MS, C/DVD-ROM, 3.0> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: polling
iic0 at piixpm0
vga1 at pci0 dev 8 function 0 "S3 Trio32/64" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
de0 at pci0 dev 10 function 0 "DEC 21140" rev 0x20, 21140A pass 2.0: irq 11,
address 00:03:ff:da:7c:60
isa0 at piixpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ti16750, 64 byte fifo
pccom0: probed fifo depth: 0 bytes
pccom1 at isa0 port 0x2f8/8 irq 3: ti16750, 64 byte fifo
pccom1: probed fifo depth: 0 bytes
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
biomask e765 netmask ef65 ttymask ffe7
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
