Hi all, I'm trying to setup 4.3 release on MS Virtual Server 1.1.603.0 EE R2 SP1. Booting from cd-rom,but I always stop on:
ahc0: at pci0 dev11 function 0 "Adaptec AIC-7870" rev 0x02: irq 11 ahc0: Host Adapter Bios disabled. Using default SCSI device parameters Using VMRCplus 1.6.0.0 for communication with MS VS. I can't go in BIOS -> no reactions on Del key. Amibios 2001 BIOS Date: 02/22/06 Ver: 08.00.02 Adaptec SCSI BIOS V3.10 There are two other problems in dmesg: acpi at bios0 function 0x0 not configured pcibios at bios0 function 0x1a not configured bios0: ROM list: 0xc0000/0xc000! 0xcc000/0x800 . . . "Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured Don't depend if HDD is on SCSI or IDE.CDROM is set on IDE,but in dmesg is on scsibus0. PC running MS Virtual Server is : Vista Enterprise 64bit SP1 Intel Core2 Quad CPU Q6600 2.4GHz 8GB RAM DDR HDD 250GB ST3250410AS nVidia GeForce 7300 GT CD/DVD RW SH-S203D LAN Realtek RTL8168B/8111B Gigabit Just curios if someone use same horrible configuration with MS VS as I must :-) I'm trying to "convert" to Vmware,but it's long run. There are a lot of people positive on Windows :-) Thx TB PS:I can recommend for all to go faraway from MS VS.It's very bad thing. Even if you are running Win on it :-)
