The weekend before the hackaton started, I updated my 2-stage firewall
clusters at home, where the outer stage is setup as a filtering bridge
cluster, and the inner stage is setup as a filtering router cluster.
Both clusters are currently operating in active-passive mode, using
pfsync, carp, ifstated, etc.

After the update to the current snapshop of Saturday June 7, I observed
loosing memory at a rate of about 12 MByte per day, on both the inner
and outer cluster nodes. (I use Cacti to SNMP get memory usage and graph
free memory.)

Two days ago, I updated all four node to the latest snapshot again.
Since, the leak has apparently been plugged on the filtering router
inner firewall nodes. But it persists on the two filtering bridges outer
firewall node. The leak rate is the same for the active and the passive
node, still about 12 MByte per day.

I remember we had such a situation in fall last year. If I recall
correctly, pfsync was the culprit then which required some plumbing
which was done by reyk@ or [EMAIL PROTECTED]

Rolf

Reply via email to