On Thu, May 08, 2008 at 05:18:26PM -0400, Will wrote:
> I did see that, but did not realize that the 1GB limit is not a
> user-configurable feature.
>
> Even so, the FAQ implies that a 2TB filesystem is possible with
> default options, which is what I have.
It might be the 2TB limit is a little too high, and the actual limit
is lower. Can you show us your disklabel entry for /dev/sd0i and the
output of df -i?
-Otto
>
> relevant output of df:
>
> Filesystem 512-blocks Used Avail Capacity Mounted on
> /dev/sd0i 3758267452 1935576944 1634777136 54% /mnt/share
>
> -William
>
> On Thu, May 8, 2008 at 5:04 PM, David J. Stillman
> <[EMAIL PROTECTED]> wrote:
> > Isn't this the 1GB application limit mentioned in FAQ 14.7 - " By the time
> > one gets to a 2TB file system with default fragment and block sizes, fsck
> > will require 1GB RAM to run, which is the application limit under OpenBSD.
> > Larger fragments and/or blocks will reduce the number of inodes, and allow
> > for larger file systems."?
> >
> > Will wrote:
> >>
> >> Hello all,
> >>
> >> I just upgraded to 4.3, and I would like to congratulate the devs on
> >> another wonderful release! shutdown -p works and the wbng sensor
> >> support was a nice surprise. However, the most useful feature to me
> >> was the support for ffs2.
> >>
> >> I upgraded without a hitch, and repartitioned from a 1tb filesystem to
> >> a 2tb share mount point. However, when I try to fsck the system just
> >> to make sure everything is ok, I receive this error:
> >>
> >> # fsck -f /dev/sd0i
> >> ** /dev/rsd0i
> >> ** File system is already clean
> >> cannot alloc 485015042 bytes for lncntp
> >>
> >> I just upgraded to 3gb ram, so that should be a non-issue according to the
> >> faq.
> >>
> >> I have tried `ulimit -d unlimited` (as suggested previously in the
> >> archives), but the data limit will not go above 1048576, which I
> >> suspect to be the problem. I'm sure that there is another silly limit
> >> I am missing somewhere.
> >>
> >> Thanks for any help!
> >> -William
> >>
> >> Here is a dmesg of my system:
> >>
> >> OpenBSD 4.3 (GENERIC.MP) #1: Sat May 3 17:08:02 EDT 2008
> >> [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> >> real mem = 3219636224 (3070MB)
> >> avail mem = 3110854656 (2966MB)
> >> mainbus0 at root
> >> bios0 at mainbus0: SMBIOS rev. 2.51 @ 0xbfeea000 (35 entries)
> >> bios0: vendor Phoenix Technologies LTD version "6.00" date 07/12/2006
> >> bios0: Supermicro PDSM4+
> >> acpi0 at bios0: rev 0
> >> acpi0: tables DSDT FACP MCFG APIC BOOT SSDT
> >> acpi0: wakeup devices PXHA(S5) PXHB(S5) DEV3(S5) EXP1(S5) EXP5(S5)
> >> EXP6(S5) PCIB(S5) KBC0(S1) MSE0(S1) COM1(S5) COM2(S5) USB1(S4) USB2(S4)
> >> USB3(S4) USB4(S4) EUSB(S4)
> >> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> >> cpu0 at mainbus0: apid 0 (boot processor)
> >> cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2394.32 MHz
> >> cpu0:
> >>
> >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
> >> cpu0: 4MB 64b/line 16-way L2 cache
> >> cpu0: apic clock running at 266MHz
> >> cpu1 at mainbus0: apid 1 (application processor)
> >> cpu1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2394.00 MHz
> >> cpu1:
> >>
> >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
> >> cpu1: 4MB 64b/line 16-way L2 cache
> >> ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
> >> ioapic1 at mainbus0 apid 3 pa 0xfecc0000, version 20, 24 pins
> >> ioapic2 at mainbus0 apid 4 pa 0xfecc0400, version 20, 24 pins
> >> acpiprt0 at acpi0: bus 0 (PCI0)
> >> acpiprt1 at acpi0: bus 2 (PXHA)
> >> acpiprt2 at acpi0: bus 3 (PXHB)
> >> acpiprt3 at acpi0: bus -1 (DEV3)
> >> acpiprt4 at acpi0: bus 9 (EXP1)
> >> acpiprt5 at acpi0: bus 13 (EXP5)
> >> acpiprt6 at acpi0: bus 14 (EXP6)
> >> acpiprt7 at acpi0: bus 15 (PCIB)
> >> acpicpu0 at acpi0
> >> acpicpu1 at acpi0
> >> acpibtn0 at acpi0: PWRB
> >> ipmi at mainbus0 not configured
> >> pci0 at mainbus0 bus 0: configuration mode 1
> >> pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0xc0
> >> ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0: apic 2 int 16
> >> (irq 10)
> >> pci1 at ppb0 bus 1
> >> ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> >> pci2 at ppb1 bus 2
> >> "Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
> >> ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
> >> pci3 at ppb2 bus 3
> >> ppb3 at pci3 dev 3 function 0 "Intel IOP331 PCIX-PCIX" rev 0x07
> >> pci4 at ppb3 bus 4
> >> ami0 at pci4 dev 14 function 0 "Symbios Logic MegaRAID SATA 4x/8x" rev
> >> 0x07: apic 4 int 4 (irq 10)
> >> ami0: LSI 3008, 32b, FW 815C, BIOS vH432, 128MB RAM
> >> ami0: 1 channels, 0 FC loops, 1 logical drives
> >> scsibus0 at ami0: 40 targets
> >> sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
> >> sd0: 1907348MB, 243152 cyl, 255 head, 63 sec, 512 bytes/sec, 3906248704
> >> sec total
> >> scsibus1 at ami0: 16 targets
> >> "Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 3 not configured
> >> ppb4 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int
> >> 17 (irq 11)
> >> pci5 at ppb4 bus 9
> >> ppb5 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 2 int 17
> >> (irq 11)
> >> pci6 at ppb5 bus 13
> >> em0 at pci6 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic 2
> >> int 16 (irq 10), address 00:30:48:8b:b6:76
> >> ppb6 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 2 int 16
> >> (irq 10)
> >> pci7 at ppb6 bus 14
> >> em1 at pci7 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 2
> >> int 17 (irq 11), address 00:30:48:8b:b6:77
> >> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int
> >> 23 (irq 5)
> >> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int
> >> 19 (irq 10)
> >> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int
> >> 18 (irq 11)
> >> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int
> >> 16 (irq 10)
> >> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int
> >> 23 (irq 5)
> >> usb0 at ehci0: USB revision 2.0
> >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> >> ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
> >> pci8 at ppb7 bus 15
> >> vga1 at pci8 dev 4 function 0 "ATI ES1000" rev 0x02
> >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >> pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
> >> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> >> channel 0 configured to compatibility, channel 1 configured to
> >> compatibility
> >> pciide0: channel 0 disabled (no drives)
> >> pciide0: channel 1 disabled (no drives)
> >> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2
> >> int 19 (irq 10)
> >> iic0 at ichiic0
> >> lm1 at iic0 addr 0x2d: W83627HF
> >> wbng0 at iic0 addr 0x2f: w83793g
> >> iic0: addr 0x48 00=7f 02=4b 03=50 04=7f 06=4b 07=50 08=7f 0a=4b 0b=50
> >> 0c=7f 0e=4b 0f=50 10=7f 12=4b 13=50 14=7f 16=4b 17=50 18=7f 1a=4b 1b=50
> >> 1c=7f 1e=4b 1f=50 20=7f 22=4b 23=50 24=7f 26=4b 27=50 28=7f 2a=4b 2b=50
> >> 2c=7f 2e=4b 2f=50 30=7f 32=4b 33=50 34=7f 36=4b 37=50 38=7f 3a=4b 3b=50
> >> 3c=7f 3e=4b 3f=50 40=7f 42=4b 43=50 44=7f 46=4b 47=50 48=7f 4a=4b 4b=50
> >> 4c=7f 4e=4b 4f=50 50=7f 52=4b 53=50 54=7f 56=4b 57=50 58=7f 5a=4b 5b=50
> >> 5c=7f 5e=4b 5f=50 60=7f 62=4b 63=50 64=7f 66=4b 67=50 68=7f 6a=4b 6b=50
> >> 6c=7f 6e=4b 6f=50 70=7f 72=4b 73=50 74=7f 76=4b 77=50 78=7f 7a=4b 7b=50
> >> 7c=7f 7e=4b 7f=50 80=7f 82=4b 83=50 84=7f 86=4b 87=50 88=7f 8a=4b 8b=50
> >> 8c=7f 8e=4b 8f=50 90=7f 92=4b 93=50 94=7f 96=4b 97=50 98=7f 9a=4b 9b=50
> >> 9c=7f 9e=4b 9f=50 a0=7f a2=4b a3=50 a4=7f a6=4b a7=50 a8=7f aa=4b ab=50
> >> ac=7f ae=4b af=50 b0=7f b2=4b b3=50 b4=7f b6=4b b7=50 b8=7f ba=4b bb=50
> >> bc=7f be=4b bf=50 c0=7f c2=4b c3=50 c4=7f c6=4b c7=50 c8=7f ca=4b cb=50
> >> cc=7f ce=4b cf=50 d0=7f d2=4b d3=50 d4=7f d6=4b d7=50 d!
> >>
> >> 8=7f da=4b db=50 dc=7f de=4b df=50 e0=7f e2=4b e3=50 e4=7f e6=4b e7=50
> >> e8=7f ea=4b eb=50 ec=7f ee=4b ef=50 f0=7f f2=4b f3=50 f4=7f f6=4b f7=50
> >> f8=7f fa=4b fb=50 fc=7f fe=4b ff=50 words 00=7f00 01=00ff 02=4b00 03=5000
> >> 04=7f00 05=00ff 06=4b00 07=5000 08=7f00 09=00ff 0a=4b00 0b=5000 0c=7f00
> >> 0d=00ff 0e=4b00 0f=5000
> >> iic0: addr 0x49 00=7f 02=4b 03=50 04=7f 06=4b 07=50 08=7f 0a=4b 0b=50
> >> 0c=7f 0e=4b 0f=50 10=7f 12=4b 13=50 14=7f 16=4b 17=50 18=7f 1a=4b 1b=50
> >> 1c=7f 1e=4b 1f=50 20=7f 22=4b 23=50 24=7f 26=4b 27=50 28=7f 2a=4b 2b=50
> >> 2c=7f 2e=4b 2f=50 30=7f 32=4b 33=50 34=7f 36=4b 37=50 38=7f 3a=4b 3b=50
> >> 3c=7f 3e=4b 3f=50 40=7f 42=4b 43=50 44=7f 46=4b 47=50 48=7f 4a=4b 4b=50
> >> 4c=7f 4e=4b 4f=50 50=7f 52=4b 53=50 54=7f 56=4b 57=50 58=7f 5a=4b 5b=50
> >> 5c=7f 5e=4b 5f=50 60=7f 62=4b 63=50 64=7f 66=4b 67=50 68=7f 6a=4b 6b=50
> >> 6c=7f 6e=4b 6f=50 70=7f 72=4b 73=50 74=7f 76=4b 77=50 78=7f 7a=4b 7b=50
> >> 7c=7f 7e=4b 7f=50 80=7f 82=4b 83=50 84=7f 86=4b 87=50 88=7f 8a=4b 8b=50
> >> 8c=7f 8e=4b 8f=50 90=7f 92=4b 93=50 94=7f 96=4b 97=50 98=7f 9a=4b 9b=50
> >> 9c=7f 9e=4b 9f=50 a0=7f a2=4b a3=50 a4=7f a6=4b a7=50 a8=7f aa=4b ab=50
> >> ac=7f ae=4b af=50 b0=7f b2=4b b3=50 b4=7f b6=4b b7=50 b8=7f ba=4b bb=50
> >> bc=7f be=4b bf=50 c0=7f c2=4b c3=50 c4=7f c6=4b c7=50 c8=7f ca=4b cb=50
> >> cc=7f ce=4b cf=50 d0=7f d2=4b d3=50 d4=7f d6=4b d7=50 d!
> >>
> >> 8=7f da=4b db=50 dc=7f de=4b df=50 e0=7f e2=4b e3=50 e4=7f e6=4b e7=50
> >> e8=7f ea=4b eb=50 ec=7f ee=4b ef=50 f0=7f f2=4b f3=50 f4=7f f6=4b f7=50
> >> f8=7f fa=4b fb=50 fc=7f fe=4b ff=50 words 00=7f00 01=00ff 02=4b00 03=5000
> >> 04=7f00 05=00ff 06=4b00 07=5000 08=7f00 09=00ff 0a=4b00 0b=5000 0c=7f00
> >> 0d=00ff 0e=4b00 0f=5000
> >> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-5300CL5
> >> spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM ECC PC2-5300CL5
> >> spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-5300CL5
> >> usb1 at uhci0: USB revision 1.0
> >> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> usb2 at uhci1: USB revision 1.0
> >> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> usb3 at uhci2: USB revision 1.0
> >> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> usb4 at uhci3: USB revision 1.0
> >> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> isa0 at pcib0
> >> isadma0 at isa0
> >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> >> com0: console
> >> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> >> pckbc0 at isa0 port 0x60/5
> >> pckbd0 at pckbc0 (kbd slot)
> >> pckbc0: using irq 1 for kbd slot
> >> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> >> pcppi0 at isa0 port 0x61
> >> midi0 at pcppi0: <PC speaker>
> >> spkr0 at pcppi0
> >> lpt0 at isa0 port 0x378/4 irq 7
> >> wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
> >> port 0x295/2 not configured
> >> lm0 at isa0 port 0x290/8: W83627HF
> >> lm1 detached
> >> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> >> softraid0 at root
> >> root on sd0a swap on sd0b dump on sd0b
