I did see that, but did not realize that the 1GB limit is not a
user-configurable feature.

Even so, the FAQ implies that a 2TB filesystem is possible with
default options, which is what I have.

relevant output of df:

Filesystem  512-blocks      Used     Avail Capacity  Mounted on
/dev/sd0i   3758267452 1935576944 1634777136    54%    /mnt/share

-William

On Thu, May 8, 2008 at 5:04 PM, David J. Stillman
<[EMAIL PROTECTED]> wrote:
> Isn't this the 1GB application limit mentioned in FAQ 14.7 - " By the time
> one gets to a 2TB file system with default fragment and block sizes, fsck
> will require 1GB RAM to run, which is the application limit under OpenBSD.
> Larger fragments and/or blocks will reduce the number of inodes, and allow
> for larger file systems."?
>
> Will wrote:
>>
>> Hello all,
>>
>> I just upgraded to 4.3, and I would like to congratulate the devs on
>> another wonderful release! shutdown -p works and the wbng sensor
>> support was a nice surprise. However, the most useful feature to me
>> was the support for ffs2.
>>
>> I upgraded without a hitch, and repartitioned from a 1tb filesystem to
>> a 2tb share mount point. However, when I try to fsck the system just
>> to make sure everything is ok, I receive this error:
>>
>> # fsck -f /dev/sd0i
>> ** /dev/rsd0i
>> ** File system is already clean
>> cannot alloc 485015042 bytes for lncntp
>>
>> I just upgraded to 3gb ram, so that should be a non-issue according to the
>> faq.
>>
>> I have tried `ulimit -d unlimited` (as suggested previously in the
>> archives), but the data limit will not go above 1048576, which I
>> suspect to be the problem. I'm sure that there is another silly limit
>> I am missing somewhere.
>>
>> Thanks for any help!
>> -William
>>
>> Here is a dmesg of my system:
>>
>> OpenBSD 4.3 (GENERIC.MP) #1: Sat May  3 17:08:02 EDT 2008
>>   [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> real mem = 3219636224 (3070MB)
>> avail mem = 3110854656 (2966MB)
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 2.51 @ 0xbfeea000 (35 entries)
>> bios0: vendor Phoenix Technologies LTD version "6.00" date 07/12/2006
>> bios0: Supermicro PDSM4+
>> acpi0 at bios0: rev 0
>> acpi0: tables DSDT FACP MCFG APIC BOOT SSDT
>> acpi0: wakeup devices PXHA(S5) PXHB(S5) DEV3(S5) EXP1(S5) EXP5(S5)
>> EXP6(S5) PCIB(S5) KBC0(S1) MSE0(S1) COM1(S5) COM2(S5) USB1(S4) USB2(S4)
>> USB3(S4) USB4(S4) EUSB(S4)
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2394.32 MHz
>> cpu0:
>>
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
>> cpu0: 4MB 64b/line 16-way L2 cache
>> cpu0: apic clock running at 266MHz
>> cpu1 at mainbus0: apid 1 (application processor)
>> cpu1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2394.00 MHz
>> cpu1:
>>
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
>> cpu1: 4MB 64b/line 16-way L2 cache
>> ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
>> ioapic1 at mainbus0 apid 3 pa 0xfecc0000, version 20, 24 pins
>> ioapic2 at mainbus0 apid 4 pa 0xfecc0400, version 20, 24 pins
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus 2 (PXHA)
>> acpiprt2 at acpi0: bus 3 (PXHB)
>> acpiprt3 at acpi0: bus -1 (DEV3)
>> acpiprt4 at acpi0: bus 9 (EXP1)
>> acpiprt5 at acpi0: bus 13 (EXP5)
>> acpiprt6 at acpi0: bus 14 (EXP6)
>> acpiprt7 at acpi0: bus 15 (PCIB)
>> acpicpu0 at acpi0
>> acpicpu1 at acpi0
>> acpibtn0 at acpi0: PWRB
>> ipmi at mainbus0 not configured
>> pci0 at mainbus0 bus 0: configuration mode 1
>> pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0xc0
>> ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0: apic 2 int 16
>> (irq 10)
>> pci1 at ppb0 bus 1
>> ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
>> pci2 at ppb1 bus 2
>> "Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
>> ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
>> pci3 at ppb2 bus 3
>> ppb3 at pci3 dev 3 function 0 "Intel IOP331 PCIX-PCIX" rev 0x07
>> pci4 at ppb3 bus 4
>> ami0 at pci4 dev 14 function 0 "Symbios Logic MegaRAID SATA 4x/8x" rev
>> 0x07: apic 4 int 4 (irq 10)
>> ami0: LSI 3008, 32b, FW 815C, BIOS vH432, 128MB RAM
>> ami0: 1 channels, 0 FC loops, 1 logical drives
>> scsibus0 at ami0: 40 targets
>> sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
>> sd0: 1907348MB, 243152 cyl, 255 head, 63 sec, 512 bytes/sec, 3906248704
>> sec total
>> scsibus1 at ami0: 16 targets
>> "Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 3 not configured
>> ppb4 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int
>> 17 (irq 11)
>> pci5 at ppb4 bus 9
>> ppb5 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 2 int 17
>> (irq 11)
>> pci6 at ppb5 bus 13
>> em0 at pci6 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic 2
>> int 16 (irq 10), address 00:30:48:8b:b6:76
>> ppb6 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 2 int 16
>> (irq 10)
>> pci7 at ppb6 bus 14
>> em1 at pci7 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 2
>> int 17 (irq 11), address 00:30:48:8b:b6:77
>> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int
>> 23 (irq 5)
>> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int
>> 19 (irq 10)
>> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int
>> 18 (irq 11)
>> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int
>> 16 (irq 10)
>> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int
>> 23 (irq 5)
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
>> pci8 at ppb7 bus 15
>> vga1 at pci8 dev 4 function 0 "ATI ES1000" rev 0x02
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
>> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
>> channel 0 configured to compatibility, channel 1 configured to
>> compatibility
>> pciide0: channel 0 disabled (no drives)
>> pciide0: channel 1 disabled (no drives)
>> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2
>> int 19 (irq 10)
>> iic0 at ichiic0
>> lm1 at iic0 addr 0x2d: W83627HF
>> wbng0 at iic0 addr 0x2f: w83793g
>> iic0: addr 0x48 00=7f 02=4b 03=50 04=7f 06=4b 07=50 08=7f 0a=4b 0b=50
>> 0c=7f 0e=4b 0f=50 10=7f 12=4b 13=50 14=7f 16=4b 17=50 18=7f 1a=4b 1b=50
>> 1c=7f 1e=4b 1f=50 20=7f 22=4b 23=50 24=7f 26=4b 27=50 28=7f 2a=4b 2b=50
>> 2c=7f 2e=4b 2f=50 30=7f 32=4b 33=50 34=7f 36=4b 37=50 38=7f 3a=4b 3b=50
>> 3c=7f 3e=4b 3f=50 40=7f 42=4b 43=50 44=7f 46=4b 47=50 48=7f 4a=4b 4b=50
>> 4c=7f 4e=4b 4f=50 50=7f 52=4b 53=50 54=7f 56=4b 57=50 58=7f 5a=4b 5b=50
>> 5c=7f 5e=4b 5f=50 60=7f 62=4b 63=50 64=7f 66=4b 67=50 68=7f 6a=4b 6b=50
>> 6c=7f 6e=4b 6f=50 70=7f 72=4b 73=50 74=7f 76=4b 77=50 78=7f 7a=4b 7b=50
>> 7c=7f 7e=4b 7f=50 80=7f 82=4b 83=50 84=7f 86=4b 87=50 88=7f 8a=4b 8b=50
>> 8c=7f 8e=4b 8f=50 90=7f 92=4b 93=50 94=7f 96=4b 97=50 98=7f 9a=4b 9b=50
>> 9c=7f 9e=4b 9f=50 a0=7f a2=4b a3=50 a4=7f a6=4b a7=50 a8=7f aa=4b ab=50
>> ac=7f ae=4b af=50 b0=7f b2=4b b3=50 b4=7f b6=4b b7=50 b8=7f ba=4b bb=50
>> bc=7f be=4b bf=50 c0=7f c2=4b c3=50 c4=7f c6=4b c7=50 c8=7f ca=4b cb=50
>> cc=7f ce=4b cf=50 d0=7f d2=4b d3=50 d4=7f d6=4b d7=50 d!
>>
>>  8=7f da=4b db=50 dc=7f de=4b df=50 e0=7f e2=4b e3=50 e4=7f e6=4b e7=50
>> e8=7f ea=4b eb=50 ec=7f ee=4b ef=50 f0=7f f2=4b f3=50 f4=7f f6=4b f7=50
>> f8=7f fa=4b fb=50 fc=7f fe=4b ff=50 words 00=7f00 01=00ff 02=4b00 03=5000
>> 04=7f00 05=00ff 06=4b00 07=5000 08=7f00 09=00ff 0a=4b00 0b=5000 0c=7f00
>> 0d=00ff 0e=4b00 0f=5000
>> iic0: addr 0x49 00=7f 02=4b 03=50 04=7f 06=4b 07=50 08=7f 0a=4b 0b=50
>> 0c=7f 0e=4b 0f=50 10=7f 12=4b 13=50 14=7f 16=4b 17=50 18=7f 1a=4b 1b=50
>> 1c=7f 1e=4b 1f=50 20=7f 22=4b 23=50 24=7f 26=4b 27=50 28=7f 2a=4b 2b=50
>> 2c=7f 2e=4b 2f=50 30=7f 32=4b 33=50 34=7f 36=4b 37=50 38=7f 3a=4b 3b=50
>> 3c=7f 3e=4b 3f=50 40=7f 42=4b 43=50 44=7f 46=4b 47=50 48=7f 4a=4b 4b=50
>> 4c=7f 4e=4b 4f=50 50=7f 52=4b 53=50 54=7f 56=4b 57=50 58=7f 5a=4b 5b=50
>> 5c=7f 5e=4b 5f=50 60=7f 62=4b 63=50 64=7f 66=4b 67=50 68=7f 6a=4b 6b=50
>> 6c=7f 6e=4b 6f=50 70=7f 72=4b 73=50 74=7f 76=4b 77=50 78=7f 7a=4b 7b=50
>> 7c=7f 7e=4b 7f=50 80=7f 82=4b 83=50 84=7f 86=4b 87=50 88=7f 8a=4b 8b=50
>> 8c=7f 8e=4b 8f=50 90=7f 92=4b 93=50 94=7f 96=4b 97=50 98=7f 9a=4b 9b=50
>> 9c=7f 9e=4b 9f=50 a0=7f a2=4b a3=50 a4=7f a6=4b a7=50 a8=7f aa=4b ab=50
>> ac=7f ae=4b af=50 b0=7f b2=4b b3=50 b4=7f b6=4b b7=50 b8=7f ba=4b bb=50
>> bc=7f be=4b bf=50 c0=7f c2=4b c3=50 c4=7f c6=4b c7=50 c8=7f ca=4b cb=50
>> cc=7f ce=4b cf=50 d0=7f d2=4b d3=50 d4=7f d6=4b d7=50 d!
>>
>>  8=7f da=4b db=50 dc=7f de=4b df=50 e0=7f e2=4b e3=50 e4=7f e6=4b e7=50
>> e8=7f ea=4b eb=50 ec=7f ee=4b ef=50 f0=7f f2=4b f3=50 f4=7f f6=4b f7=50
>> f8=7f fa=4b fb=50 fc=7f fe=4b ff=50 words 00=7f00 01=00ff 02=4b00 03=5000
>> 04=7f00 05=00ff 06=4b00 07=5000 08=7f00 09=00ff 0a=4b00 0b=5000 0c=7f00
>> 0d=00ff 0e=4b00 0f=5000
>> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-5300CL5
>> spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM ECC PC2-5300CL5
>> spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-5300CL5
>> usb1 at uhci0: USB revision 1.0
>> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb2 at uhci1: USB revision 1.0
>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb3 at uhci2: USB revision 1.0
>> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb4 at uhci3: USB revision 1.0
>> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at pcib0
>> isadma0 at isa0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> com0: console
>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pcppi0 at isa0 port 0x61
>> midi0 at pcppi0: <PC speaker>
>> spkr0 at pcppi0
>> lpt0 at isa0 port 0x378/4 irq 7
>> wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
>>  port 0x295/2 not configured
>> lm0 at isa0 port 0x290/8: W83627HF
>> lm1 detached
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> softraid0 at root
>> root on sd0a swap on sd0b dump on sd0b

Reply via email to