Hi, I'm having problems when I try to read or mount an audio disk in my OpenBSD 4.2 sparc64 machine. When I insert a data cdrom, the disklabel shows the partitions and I can mount it, but when it's an audio cdrom, disklabel doesn't show any partition and the system reports empty cdrom unit, in spite of having an audio cd inside.
First of all, this is the dmesg of my system: [EMAIL PROTECTED] ~]$ dmesg console is keyboard/display Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.2 (GENERIC) #1427: Tue Aug 28 10:46:40 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC real mem = 1073741824 (1024MB) avail mem = 1028055040 (980MB) mainbus0 at root: Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz) cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 9.1) @ 440 MHz, version 0 FPU cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l) psycho0 at mainbus0 addr 0xfffc4000: SUNW,sabre, impl 0, version 0, ign 7c0 psycho0: bus range 0-3, PCI bus 0 psycho0: dvma map c0000000-dfffffff, iotdb 1bbe000-1c3e000 pci0 at psycho0 ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13 pci1 at ppb0 bus 1 ebus0 at pci1 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003 power0 at ebus0 addr 724000-724003 ipl 37 "SUNW,pll" at ebus0 addr 504000-504002 not configured sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2 sabtty0 at sab0 port 0 sabtty1 at sab0 port 1 comkbd0 at ebus0 addr 3083f8-3083ff ipl 41: layout 42 wskbd0 at comkbd0: console keyboard com0 at ebus0 addr 3062f8-3062ff ipl 42: mouse: ns16550a, 16 byte fifo lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34: polled "fdthree" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not configured clock1 at ebus0 addr 0-1fff: mk48t59 "flashprom" at ebus0 addr 0-fffff not configured audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 35 ipl 36: nvaddrs 0 audio0 at audioce0 hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address 08:00:20:fe:3f:6c nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1 vgafb0 at pci1 dev 2 function 0 "ATI Mach64 GP" rev 0x5c wsdisplay0 at vgafb0 wsdisplay0: screen 0 added (std, sun emulation) pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 0x7e0 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <ST320420A> wd0: 16-sector PIO, LBA, 19458MB, 39851760 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW SH-S182D, SB05> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13 pci2 at ppb1 bus 2 ppb2 at pci2 dev 1 function 0 "DEC 21153 PCI-PCI" rev 0x04 pci3 at ppb2 bus 3 "Sun PCIO EBus2" rev 0x01 at pci3 dev 0 function 0 not configured hme1 at pci3 dev 0 function 1 "Sun HME" rev 0x01: ivec 0x7d1, address 08:00:20:f6:85:94 luphy0 at hme1 phy 1: LU6612 10/100 PHY, rev. 1 "Sun PCIO EBus2" rev 0x01 at pci3 dev 1 function 0 not configured hme2 at pci3 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7d2, address 08:00:20:f6:85:95 luphy1 at hme2 phy 1: LU6612 10/100 PHY, rev. 1 "Sun PCIO EBus2" rev 0x01 at pci3 dev 2 function 0 not configured hme3 at pci3 dev 2 function 1 "Sun HME" rev 0x01: ivec 0x7d3, address 08:00:20:f6:85:96 luphy2 at hme3 phy 1: LU6612 10/100 PHY, rev. 1 "Sun PCIO EBus2" rev 0x01 at pci3 dev 3 function 0 not configured hme4 at pci3 dev 3 function 1 "Sun HME" rev 0x01: ivec 0x7d0, address 08:00:20:f6:85:97 luphy3 at hme4 phy 1: LU6612 10/100 PHY, rev. 1 siop0 at pci2 dev 2 function 0 "Symbios Logic 53c875" rev 0x14: ivec 0x7d4, using 4K of on-board RAM scsibus1 at siop0: 16 targets siop1 at pci2 dev 2 function 1 "Symbios Logic 53c875" rev 0x14: ivec 0x7d5, using 4K of on-board RAM scsibus2 at siop1: 16 targets ohci0 at pci2 dev 3 function 0 "NEC USB" rev 0x43: ivec 0x7d8, version 1.0 ohci1 at pci2 dev 3 function 1 "NEC USB" rev 0x43: ivec 0x7d9, version 1.0 ehci0 at pci2 dev 3 function 2 "NEC USB" rev 0x04: ivec 0x7da usb0 at ehci0: USB revision 2.0 uhub0 at usb0: NEC EHCI root hub, rev 2.00/1.00, addr 1 usb1 at ohci0: USB revision 1.0 uhub1 at usb1: NEC OHCI root hub, rev 1.00/1.00, addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2: NEC OHCI root hub, rev 1.00/1.00, addr 1 creator0 at mainbus0 addr 0xfebc0000: Elite3D, model SUNW,XXX-XXXX, dac 0 wsdisplay1 at creator0: console (std, sun emulation), using wskbd0 "pcons" at mainbus0 not configured bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0 root on wd0a swap on wd0b dump on wd0b This is what happens when I put a data cdrom: [EMAIL PROTECTED] ~]$ disklabel cd0 # /dev/rcd0c: type: ATAPI disk: CDROM label: flags: bytes/sector: 2048 sectors/track: 100 tracks/cylinder: 1 sectors/cylinder: 100 cylinders: 698 total sectors: 69756 rpm: 300 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # microseconds track-to-track seek: 0 # microseconds drivedata: 0 3 partitions: # size offset fstype [fsize bsize cpg] a: 69756 0 ISO9660 c: 69756 0 ISO9660 And this is what happens with an audio cdrom: [EMAIL PROTECTED] ~]$ disklabel cd0 # /dev/rcd0c: type: ATAPI disk: ATAPI CD-ROM label: fictitious flags: bytes/sector: 2048 sectors/track: 100 tracks/cylinder: 1 sectors/cylinder: 100 cylinders: 2367 total sectors: 236601 rpm: 300 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # microseconds track-to-track seek: 0 # microseconds drivedata: 0 0 partitions: # size offset fstype [fsize bsize cpg] Any attempt to read the disk fails: [EMAIL PROTECTED] ~]$ cd-discid /dev/cdrom cd-discid: /dev/cdrom: CDROMREADTOCHDR: Inappropriate ioctl for device At the end of dmesg this message is repeated several times: cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present - Tray Open cdio works, but only when I use "cdplay" as the parameter, with "play" it just ends silently without playing. [EMAIL PROTECTED] ~]$ cdio play No CD device name specified. Defaulting to cd0. [EMAIL PROTECTED] ~]$ cdio cdplay No CD device name specified. Defaulting to cd0. track 1 'a' 00000090/00016081 0%^C So it seems I can do only some things with an audio cd, but not what I want to use (the "abcde" package) because cd-discid reports empty cd unit. Any ideas? Thanks in advance -- Joaquin Herrero