On Thu, Mar 13, 2008 at 03:06:49AM -0400, Geoff Steckel wrote:
> Theo de Raadt wrote:
>> You really should show a dmesg of your machine.
although this was not addressed at myself.
> sure:
I second that one:
diff to previous (full dmesg below):
--- dmesg.foo Thu Mar 13 23:49:09 2008
+++ dmesg.fins Thu Mar 13 23:48:59 2008
@@ -1,10 +1,10 @@
-OpenBSD 4.2-current (GENERIC) #5: Sun Mar 9 10:26:16 CET 2008
+OpenBSD 4.2-current (GENERIC) #15: Thu Mar 13 23:39:59 CET 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Esther processor 1500MHz ("CentaurHauls" 686-class) 1.51 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
real mem = 1005023232 (958MB)
-avail mem = 963772416 (919MB)
+avail mem = 963768320 (919MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/18/07, BIOS32 rev. 0 @ 0xfa0a0,
SMBIOS rev. 2.3 @ 0xf0000 (34 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 05/18/2007
@@ -89,7 +89,8 @@
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
-npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
+: Fintek F71805F
+fins0 at isa0 port 0x4e/2npx0 at isa0 port 0xf0/16: reported by CPUID; using
exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
There seems to be a small formating issue with the way fins prints
to dmesg, I was first shocked to see npx0 go until I had a closer look.
Otherwise it seems to work just fine
# sysctl hw:
hw.machine=i386
hw.model=VIA Esther processor 1500MHz ("CentaurHauls" 686-class)
hw.ncpu=1
hw.byteorder=1234
hw.physmem=1005023232
hw.usermem=1005019136
hw.pagesize=4096
hw.disknames=wd0,wd1,cd0
hw.diskcount=3
hw.sensors.fins0.temp0=30.00 degC (Temp1)
hw.sensors.fins0.temp1=39.00 degC (Temp2)
hw.sensors.fins0.temp2=127.00 degC (Temp3)
hw.sensors.fins0.fan0=6550 RPM (Fan1)
hw.sensors.fins0.volt0=3.31 VDC (+3.3V)
hw.sensors.fins0.volt1=1.07 VDC (Vtt)
hw.sensors.fins0.volt2=1.44 VDC (Vram)
hw.sensors.fins0.volt3=1.62 VDC (Vchips)
hw.sensors.fins0.volt4=5.13 VDC (+5V)
hw.sensors.fins0.volt5=11.88 VDC (+12V)
hw.sensors.fins0.volt6=1.10 VDC (Vcc 1.5V)
hw.sensors.fins0.volt7=1.47 VDC (VCore)
hw.sensors.fins0.volt8=4.88 VDC (Vsb)
hw.cpuspeed=1501
hw.product=CN700-8237
hw.uuid=Not Set
And temps/voltages do change and temp[01] seems to make sense
They rise a couple of degrees after doing a few minutes of
cat /dev/zero > /dev/null
After adding sensor(fins.temp*) to sym{on,ux}.conf they make nice and
steady graphs.
Thanks so far to Geoff Steckel, I'll this router with your diff for a
while to see if problems arise.
Regards,
ahb
OpenBSD 4.2-current (GENERIC) #15: Thu Mar 13 23:39:59 CET 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Esther processor 1500MHz ("CentaurHauls" 686-class) 1.51 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
real mem = 1005023232 (958MB)
avail mem = 963768320 (919MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/18/07, BIOS32 rev. 0 @ 0xfa0a0, SMBIOS
rev. 2.3 @ 0xf0000 (34 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 05/18/2007
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc904
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc830/208 (11 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
agp0 at pchb0: v3, aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xl0 at pci0 dev 8 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 11, address
00:04:76:a1:cc:d1
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 10 function 0 not configured
re0 at pci0 dev 11 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SCd
(0x1800), irq 5, address 00:30:18:a8:0f:cc
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFX3-2048>
wd0: 4-sector PIO, LBA, 1953MB, 4001760 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd1 at pciide1 channel 0 drive 1: <SanDisk SDCFX3-2048>
wd1: 4-sector PIO, LBA, 1953MB, 4001760 sectors
wd1(pciide1:0:1): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITEON, CD-ROM LTN526D, YSR5> SCSI0 5/cdrom
removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 11
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 11
ac97: codec id 0x56494170 (VIA Technologies <70>)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 10, address
00:30:18:b0:58:fa
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
: Fintek F71805F
fins0 at isa0 port 0x4e/2npx0 at isa0 port 0xf0/16: reported by CPUID; using
exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pccom1: probed fifo depth: 15 bytes
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef45 netmask ef65 ttymask ffe7
softraid0 at root
