Theo de Raadt wrote:
You really should show a dmesg of your machine.
sure:
Jan 10 21:54:31 lib /bsd: OpenBSD 4.2-current (fins) #11: Thu Jan 10
21:29:15 EST 2008
Jan 10 21:54:31 lib /bsd:
[EMAIL PROTECTED]:/doot/4.2snap/src/sys/arch/i386/compile/fins
Jan 10 21:54:31 lib /bsd: cpu0: VIA Esther processor 1500MHz
("CentaurHauls" 686-class) 1.51 GHz
Jan 10 21:54:31 lib /bsd: cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2
Jan 10 21:54:31 lib /bsd: cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
Jan 10 21:54:31 lib /bsd: real mem = 1005023232 (958MB)
Jan 10 21:54:31 lib /bsd: avail mem = 963747840 (919MB)
Jan 10 21:54:31 lib /bsd: mainbus0 at root
Jan 10 21:54:31 lib /bsd: bios0 at mainbus0: AT/286+ BIOS, date
05/16/06, BIOS32 rev. 0 @ 0xfb570, SMBIOS rev. 2.3 @ 0xf0000 (34 entries)
Jan 10 21:54:31 lib /bsd: bios0: vendor Phoenix Technologies, LTD
version "6.00 PG" date 05/16/2006
Jan 10 21:54:31 lib /bsd: apm0 at bios0: Power Management spec V1.2
(slowidle)
Jan 10 21:54:31 lib /bsd: apm0: AC on, battery charge unknown
Jan 10 21:54:31 lib /bsd: acpi at bios0 function 0x0 not configured
Jan 10 21:54:31 lib /bsd: pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdc84
Jan 10 21:54:31 lib /bsd: pcibios0: PCI IRQ Routing Table rev 1.0 @
0xfdbb0/208 (11 entries)
Jan 10 21:54:31 lib /bsd: pcibios0: bad IRQ table checksum
Jan 10 21:54:31 lib /bsd: pcibios0: PCI BIOS has 11 Interrupt Routing
table entries
Jan 10 21:54:31 lib /bsd: pcibios0: PCI Exclusive IRQs: 5 10 11
Jan 10 21:54:31 lib /bsd: pcibios0: PCI Interrupt Router at 000:17:0
("VIA VT8237 ISA" rev 0x00)
Jan 10 21:54:31 lib /bsd: pcibios0: PCI bus #1 is the last bus
Jan 10 21:54:31 lib /bsd: bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x5000!
Jan 10 21:54:31 lib /bsd: cpu0 at mainbus0
Jan 10 21:54:31 lib /bsd: cpu0: unknown Enhanced SpeedStep CPU, msr
0x08100f1308000f13
Jan 10 21:54:31 lib /bsd: cpu0: using only highest and lowest power states
Jan 10 21:54:31 lib /bsd: cpu0: Enhanced SpeedStep 1500 MHz (1004 mV):
speeds: 1500, 800 MHz
Jan 10 21:54:31 lib /bsd: pci0 at mainbus0 bus 0: configuration mode 1
(no bios)
Jan 10 21:54:31 lib /bsd: pchb0 at pci0 dev 0 function 0 "VIA CN700
Host" rev 0x00
Jan 10 21:54:31 lib /bsd: agp0 at pchb0: v3, aperture at 0xe8000000,
size 0x10000000
Jan 10 21:54:31 lib /bsd: pchb1 at pci0 dev 0 function 1 "VIA CN700
Host" rev 0x00
Jan 10 21:54:31 lib /bsd: pchb2 at pci0 dev 0 function 2 "VIA CN700
Host" rev 0x00
Jan 10 21:54:31 lib /bsd: pchb3 at pci0 dev 0 function 3 "VIA PT890
Host" rev 0x00
Jan 10 21:54:31 lib /bsd: pchb4 at pci0 dev 0 function 4 "VIA CN700
Host" rev 0x00
Jan 10 21:54:31 lib /bsd: pchb5 at pci0 dev 0 function 7 "VIA CN700
Host" rev 0x00
Jan 10 21:54:31 lib /bsd: ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP"
rev 0x00
Jan 10 21:54:31 lib /bsd: pci1 at ppb0 bus 1
Jan 10 21:54:31 lib /bsd: vga1 at pci1 dev 0 function 0 "VIA S3
Unichrome PRO IGP" rev 0x01
Jan 10 21:54:31 lib /bsd: wsdisplay0 at vga1 mux 1: console (80x25,
vt100 emulation)
Jan 10 21:54:31 lib /bsd: wsdisplay0: screen 1-5 added (80x25, vt100
emulation)
Jan 10 21:54:31 lib /bsd: re0 at pci0 dev 8 function 0 "Realtek 8169"
rev 0x10: RTL8169S (0x0400), irq 11, address 00:08:54:d1:c7:eb
Jan 10 21:54:31 lib /bsd: rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
Jan 10 21:54:31 lib /bsd: "VIA VT6306 FireWire" rev 0x80 at pci0 dev 10
function 0 not configured
Jan 10 21:54:31 lib /bsd: pciide0 at pci0 dev 15 function 0 "VIA VT6420
SATA" rev 0x80: DMA
Jan 10 21:54:31 lib /bsd: pciide0: using irq 11 for native-PCI interrupt
Jan 10 21:54:31 lib /bsd: wd0 at pciide0 channel 1 drive 0: <Maxtor 6G160E0>
Jan 10 21:54:31 lib /bsd: wd0: 16-sector PIO, LBA48, 152627MB, 312581808
sectors
Jan 10 21:54:31 lib /bsd: wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA
mode 5
Jan 10 21:54:31 lib /bsd: pciide1 at pci0 dev 15 function 1 "VIA
VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility,
channel 1 configured to compatibility
Jan 10 21:54:31 lib /bsd: wd1 at pciide1 channel 0 drive 0: <ST380011A>
Jan 10 21:54:31 lib /bsd: wd1: 16-sector PIO, LBA48, 76319MB, 156301488
sectors
Jan 10 21:54:31 lib /bsd: wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA
mode 5
Jan 10 21:54:31 lib /bsd: pciide1: channel 1 disabled (no drives)
Jan 10 21:54:31 lib /bsd: uhci0 at pci0 dev 16 function 0 "VIA VT83C572
USB" rev 0x81: irq 10
Jan 10 21:54:31 lib /bsd: uhci1 at pci0 dev 16 function 1 "VIA VT83C572
USB" rev 0x81: irq 10
Jan 10 21:54:31 lib /bsd: uhci2 at pci0 dev 16 function 2 "VIA VT83C572
USB" rev 0x81: irq 11
Jan 10 21:54:31 lib /bsd: uhci3 at pci0 dev 16 function 3 "VIA VT83C572
USB" rev 0x81: irq 11
Jan 10 21:54:31 lib /bsd: ehci0 at pci0 dev 16 function 4 "VIA VT6202
USB" rev 0x86: irq 5
Jan 10 21:54:31 lib /bsd: ehci0: timed out waiting for BIOS
Jan 10 21:54:31 lib /bsd: usb0 at ehci0: USB revision 2.0
Jan 10 21:54:31 lib /bsd: uhub0 at usb0 "VIA EHCI root hub" rev
2.00/1.00 addr 1
Jan 10 21:54:31 lib /bsd: viapm0 at pci0 dev 17 function 0 "VIA VT8237
ISA" rev 0x00
Jan 10 21:54:31 lib /bsd: iic0 at viapm0
Jan 10 21:54:31 lib /bsd: spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM
non-parity PC2-6400CL5
Jan 10 21:54:31 lib /bsd: auvia0 at pci0 dev 17 function 5 "VIA VT8233
AC97" rev 0x60: irq 5
Jan 10 21:54:31 lib /bsd: ac97: codec id 0x56494170 (VIA Technologies <70>)
Jan 10 21:54:31 lib /bsd: ac97: codec features headphone, 18 bit DAC, 18
bit ADC, KS Waves 3D
Jan 10 21:54:31 lib /bsd: audio0 at auvia0
Jan 10 21:54:31 lib /bsd: vr0 at pci0 dev 18 function 0 "VIA RhineII-2"
rev 0x78: irq 10, address 00:30:18:a2:dd:0f
Jan 10 21:54:31 lib /bsd: ukphy0 at vr0 phy 1: Generic IEEE 802.3u media
interface, rev. 10: OUI 0x004063, model 0x0032
Jan 10 21:54:31 lib /bsd: usb1 at uhci0: USB revision 1.0
Jan 10 21:54:31 lib /bsd: uhub1 at usb1 "VIA UHCI root hub" rev
1.00/1.00 addr 1
Jan 10 21:54:31 lib /bsd: usb2 at uhci1: USB revision 1.0
Jan 10 21:54:31 lib /bsd: uhub2 at usb2 "VIA UHCI root hub" rev
1.00/1.00 addr 1
Jan 10 21:54:31 lib /bsd: usb3 at uhci2: USB revision 1.0
Jan 10 21:54:31 lib /bsd: uhub3 at usb3 "VIA UHCI root hub" rev
1.00/1.00 addr 1
Jan 10 21:54:31 lib /bsd: usb4 at uhci3: USB revision 1.0
Jan 10 21:54:31 lib /bsd: uhub4 at usb4 "VIA UHCI root hub" rev
1.00/1.00 addr 1
Jan 10 21:54:31 lib /bsd: isa0 at mainbus0
Jan 10 21:54:31 lib /bsd: isadma0 at isa0
Jan 10 21:54:31 lib /bsd: pckbc0 at isa0 port 0x60/5
Jan 10 21:54:31 lib /bsd: pckbd0 at pckbc0 (kbd slot)
Jan 10 21:54:31 lib /bsd: pckbc0: using irq 1 for kbd slot
Jan 10 21:54:31 lib /bsd: wskbd0 at pckbd0: console keyboard, using
wsdisplay0
Jan 10 21:54:31 lib /bsd: pcppi0 at isa0 port 0x61
Jan 10 21:54:31 lib /bsd: midi0 at pcppi0: <PC speaker>
Jan 10 21:54:31 lib /bsd: spkr0 at pcppi0
Jan 10 21:54:31 lib /bsd: lpt0 at isa0 port 0x378/4 irq 7
Jan 10 21:54:31 lib /bsd: fins0 at isa0 port 0x4e/2: F71805F
Jan 10 21:54:31 lib /bsd: npx0 at isa0 port 0xf0/16: reported by CPUID;
using exception 16
Jan 10 21:54:31 lib /bsd: pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a,
16 byte fifo
Jan 10 21:54:31 lib /bsd: pccom0: probed fifo depth: 15 bytes
Jan 10 21:54:31 lib /bsd: pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a,
16 byte fifo
Jan 10 21:54:31 lib /bsd: pccom1: probed fifo depth: 15 bytes
Jan 10 21:54:31 lib /bsd: biomask ff65 netmask ff65 ttymask ffe7
Jan 10 21:54:31 lib /bsd: softraid0 at root
Jan 10 21:54:31 lib /bsd: root on wd1a swap on wd1b dump on wd1b
Jan 10 21:54:31 lib savecore: no core dump
lib:gwes {207} sysctl hw.sensors
hw.sensors.fins0.temp0=27.00 degC (Temp1)
hw.sensors.fins0.temp1=27.00 degC (Temp2)
hw.sensors.fins0.temp2=115.00 degC (Temp3)
hw.sensors.fins0.fan0=6024 RPM (Fan1)
hw.sensors.fins0.volt0=3.30 VDC (+3.3V)
hw.sensors.fins0.volt1=0.99 VDC (Vtt)
hw.sensors.fins0.volt2=1.50 VDC (Vram)
hw.sensors.fins0.volt3=1.60 VDC (Vchips)
hw.sensors.fins0.volt4=5.09 VDC (+5V)
hw.sensors.fins0.volt5=12.06 VDC (+12V)
hw.sensors.fins0.volt6=1.10 VDC (Vcc 1.5V)
hw.sensors.fins0.volt7=1.07 VDC (VCore)
hw.sensors.fins0.volt8=4.96 VDC (Vsb)
Determining whether or not a temperature sensor is connected
is not always reliable. Temp3 is not valid.
