Re: Dell PE1950 III - Perc 6i

Thu, 28 Feb 2008 16:21:53 -0800

There is no 4.3 release just yet. You'll have to check it out of cvs. You need to grab sys/dev/pci/mfi_pci.c & sys/dev/ic/mfi* and rebuild your kernel. 

Or you can simply use a snapshot.
On Feb 28, 2008, at 2:50 PM, "[EMAIL PROTECTED]" <[EMAIL PROTECTED] > wrote: 


Many, many thanks Marco, but please help me again.
I cannot find 4.3 release sys.tar.gz (I think I need it to find the new 
driver, or there is a patch ?) where can I download it. ?
The last question ( I hope :blush: ), which is the file that I need? mfi.c, 
mfi_pci.c, both or more ?

Thanks again.



Marco Peereboom wrote:
It'll be part of the 4.3 release. It can be easily backported though.
On Thu, Feb 28, 2008 at 09:19:05AM -0800, [EMAIL PROTECTED] wrote:
Sorry, I've the same problem. I don't understand if there is a way to 
have
OpenBSD 4.2 amd64 running on Dell PowerEdge 1950 with Perc 6 raid
controller
?

Thanks



Marco Peereboom wrote:
dlg@ is working on a fix. If I get my hands on one I might beat him to 
it :-)

On Mon, Jan 28, 2008 at 03:14:03PM +0100, J.W. Zondag wrote:

Below dmesg:
OpenBSD 4.2-current (RAMDISK_CD) #612: Tue Jan 22 17:56:50 MST 2008 


[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz ("GenuineIntel" 686- class) 
2.83 GHz
cpu0:
FPU, V86, DE, PSE, TSC, MSR, PAE, MCE, CX8, APIC, SEP, MTRR, PGE, MCA, CMOV, PAT, PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS- CPL,VMX,EST,TM2,CX16,xTPR 
real mem  = 1068400640 (1018MB)
avail mem = 1027047424 (979MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/27/07, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.4 @ 0x3fb9c000 (64 entries)
bios0: vendor Dell Inc. version "2.0.1" date 10/27/2007
bios0: Dell Inc. PowerEdge 1950
acpi0 at bios0: rev 2, can't enable ACPI
bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1e00
0xcc000/0x5e00 0xec000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 4
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 7
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 8
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 9
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
mfi0 at pci7 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04, Dell 
PERC 6/i integrated: irq 5
mfi0: firmware stuck in state 0
mfi0: can't attachppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 
0x12
pci8 at ppb7 bus 10
bge0 at pci8 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1 
(0x4201): irq 5, address 00:10:18:31:68:d0
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci9 at ppb8 bus 11
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12
pci10 at ppb9 bus 12
ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12 pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12 pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12 
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci12 at ppb11 bus 2
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 3
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 10 uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 11 uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10 ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 11 
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci14 at ppb13 bus 14
vga1 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM 
disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, 
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR-T10N, 1.02> SCSI0 
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
-snip-

2008/1/25, Marco Peereboom <[EMAIL PROTECTED]>:
I added the pci ids but it obviously didn't work. Can you send me 
the

dmesg?

On Fri, Jan 25, 2008 at 12:18:36AM +0100, J.W. Zondag wrote:

Hi,

Just got this machine from Dell.
Tried to install OpenBSD 4.2-current (23-01-2008) but it dit not
recognize the raid1 disk.
Any idea when Perc 6i will be added?

---
Thanks
JW






--
View this message in context:
http://www.nabble.com/Dell-PE1950-III---Perc-6i-tp15077666p15741360.html
Sent from the openbsd user - misc mailing list archive at Nabble.com. 





--
View this message in context: 
http://www.nabble.com/Dell-PE1950-III---Perc-6i-tp15077666p15745716.html
Sent from the openbsd user - misc mailing list archive at Nabble.com.

Reply via email to