Sorry, I've the same problem. I don't understand if there is a way to have
OpenBSD 4.2 amd64 running on Dell PowerEdge 1950 with Perc 6 raid controller
?
Thanks
Marco Peereboom wrote:
>
> dlg@ is working on a fix. If I get my hands on one I might beat him to
> it :-)
>
> On Mon, Jan 28, 2008 at 03:14:03PM +0100, J.W. Zondag wrote:
>> Below dmesg:
>>
>> OpenBSD 4.2-current (RAMDISK_CD) #612: Tue Jan 22 17:56:50 MST 2008
>> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
>> cpu0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz ("GenuineIntel" 686-class)
>> 2.83 GHz
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
>> real mem = 1068400640 (1018MB)
>> avail mem = 1027047424 (979MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 10/27/07, BIOS32 rev. 0 @
>> 0xffe90, SMBIOS rev. 2.4 @ 0x3fb9c000 (64 entries)
>> bios0: vendor Dell Inc. version "2.0.1" date 10/27/2007
>> bios0: Dell Inc. PowerEdge 1950
>> acpi0 at bios0: rev 2, can't enable ACPI
>> bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1e00
>> 0xcc000/0x5e00 0xec000/0x4000!
>> cpu0 at mainbus0
>> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
>> pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
>> ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
>> pci1 at ppb0 bus 4
>> ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
>> pci2 at ppb1 bus 5
>> ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
>> pci3 at ppb2 bus 6
>> ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
>> pci4 at ppb3 bus 7
>> bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5
>> ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
>> pci5 at ppb4 bus 8
>> ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
>> pci6 at ppb5 bus 9
>> ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
>> pci7 at ppb6 bus 1
>> mfi0 at pci7 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04, Dell
>> PERC 6/i integrated: irq 5
>> mfi0: firmware stuck in state 0
>> mfi0: can't attachppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev
>> 0x12
>> pci8 at ppb7 bus 10
>> bge0 at pci8 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
>> (0x4201): irq 5, address 00:10:18:31:68:d0
>> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
>> ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
>> pci9 at ppb8 bus 11
>> ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12
>> pci10 at ppb9 bus 12
>> ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
>> pci11 at ppb10 bus 13
>> pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
>> pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
>> pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
>> pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
>> pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
>> pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
>> pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
>> ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
>> pci12 at ppb11 bus 2
>> ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
>> pci13 at ppb12 bus 3
>> bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5
>> uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 11
>> uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 10
>> uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 11
>> uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10
>> ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 11
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
>> pci14 at ppb13 bus 14
>> vga1 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
>> disabled
>> pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
>> channel 0 configured to compatibility, channel 1 configured to
>> compatibility
>> atapiscsi0 at pciide0 channel 0 drive 0
>> scsibus0 at atapiscsi0: 2 targets
>> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR-T10N, 1.02> SCSI0
>> 5/cdrom removable
>> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
>> pciide0: channel 1 ignored (disabled)
>> usb1 at uhci0: USB revision 1.0
>> -snip-
>>
>> 2008/1/25, Marco Peereboom <[EMAIL PROTECTED]>:
>> > I added the pci ids but it obviously didn't work. Can you send me the
>> > dmesg?
>> >
>> > On Fri, Jan 25, 2008 at 12:18:36AM +0100, J.W. Zondag wrote:
>> > > Hi,
>> > >
>> > > Just got this machine from Dell.
>> > > Tried to install OpenBSD 4.2-current (23-01-2008) but it dit not
>> > > recognize the raid1 disk.
>> > > Any idea when Perc 6i will be added?
>> > >
>> > > ---
>> > > Thanks
>> > > JW
>
>
>
--
View this message in context:
http://www.nabble.com/Dell-PE1950-III---Perc-6i-tp15077666p15741360.html
Sent from the openbsd user - misc mailing list archive at Nabble.com.
