Both look like a disk going bad.
run a dd and read the entire contents of the disk to allow the disk to
reallocate the bad sectors. Then run it again to see if it is clean; if
it is you have a good chance that the drive will be fine. If not it is
going to be dead soonish...
On Thu, Jan 24, 2008 at 12:28:32PM -0000, Jonathan Steel wrote:
> Hi Everyone
>
> I would like to revisit a problem I was unable to solve about a year ago,
> an error messages I was getting about pciide temouts. Several times we
> have had hard drives that will display the following error and then the
> computer freezes:
>
> wd1(pciide1:1:0): timeout
> type: ata
> c_bcount: 65536
> c_skip: 0
> pciide1:1:0: bus-master DMA error: missing interrupt, status=0x21
>
> I tried to find the source of this problem and could not. I'm willing to
> accept that this could be due to a dying hard drive, overheated hard
> drive, or any similar causes except for a loose cable.
>
> The second error is very similar but does not make the computer lock up. I
> have been having this problem on many computers and more frequently than
> the above error. It doesn't seem to have any direct side effects. But the
> other day I noticed the error on one of my computers and we were having
> speed troubles with one of the disks. So we tried to reboot and for some
> reason the system got stuck and the watchdog didnt reboot the machine. I
> have no idea if this problem is linked to the hard drive error.
>
> Anyways, here is the error:
>
> wd2(pciide1:1:0): timeout
> type: ata
> c_bcount: 49152
> c_skip: 0
> pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
> wd2a: device timeout reading fsbn 176823520 of 176823520-0 (wd2 bn
> 176823583; cn 175420 tn 3 sn 34), retrying
> wd2: soft error (corrected)
>
> Does anybody know what this is and if its a bad thing? I have attached the
> dmesg from a computer the last two times it got the error.
>
> Thanks
>
> Jonathan Steel
>
>
> dmesg from 2008-01-22
>
> OpenBSD 4.1 (GENERIC.esentire) #0: Wed Aug 15 20:55:55 UTC 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.esentire
> cpu0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
> 2.40 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> real mem = 3756482560 (3668440K)
> avail mem = 3445522432 (3364768K)
> using 4278 buffers containing 187949056 bytes (183544K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ BIOS, date 08/25/07, BIOS32 rev. 0 @ 0xfd470,
> SMBIOS rev. 2.51 @ 0xdfeea000 (31 entries)
> bios0: Supermicro PDSMi
> pcibios0 at bios0: rev 2.1 @ 0xfd470/0xb90
> pcibios0: PCI BIOS has 20 Interrupt Routing table entries
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
> pcibios0: PCI bus #15 is the last bus
> bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1000 0xcc000/0x1000
> 0xcd000/0x1000
> acpi at mainbus0 not configured
> ipmi at mainbus0 not configured
> mainbus0: Intel MP Specification (Version 1.4)
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 266 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
> 2.40 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
> 2.40 GHz
> cpu2:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
> 2.40 GHz
> cpu3:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> mainbus0: bus 0 is type PCI
> mainbus0: bus 9 is type PCI
> mainbus0: bus 10 is type PCI
> mainbus0: bus 13 is type PCI
> mainbus0: bus 14 is type PCI
> mainbus0: bus 15 is type PCI
> mainbus0: bus 16 is type ISA
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 5 pa 0xfec10000, version 20, 24 pins
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0xc0
> ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
> pci2 at ppb1 bus 9
> ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> pci3 at ppb2 bus 10
> em0 at pci3 dev 1 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 5
> int 0 (irq 11), address 00:0e:0c:c6:49:e0
> "Intel IOxAPIC" rev 0x09 at pci2 dev 0 function 1 not configured
> ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
> pci4 at ppb3 bus 13
> em1 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic 4
> int 16 (irq 11), address 00:30:48:91:3e:f0
> ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
> pci5 at ppb4 bus 14
> em2 at pci5 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 4
> int 17 (irq 12), address 00:30:48:91:3e:f1
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 4 int
> 23 (irq 10)
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 4 int
> 19 (irq 11)
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 4 int
> 18 (irq 5)
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 4 int
> 16 (irq 11)
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 4 int
> 23 (irq 10)
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
> pci6 at ppb5 bus 15
> vga1 at pci6 dev 0 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-N, 1.AA> SCSI0 5/cdrom
> removable
> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 4 int 19 (irq 11) for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <WDC WD3200YS-01PGB0>
> wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> wd1 at pciide1 channel 0 drive 1: <WDC WD5000ABYS-01TNA0>
> wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
> wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
> wd2 at pciide1 channel 1 drive 0: <WDC WD5000YS-01MPB0>
> wd2: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
> wd3 at pciide1 channel 1 drive 1: <WDC WD5000ABYS-01TNA0>
> wd3: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
> wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
> wd3(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 4
> int 19 (irq 11)
> iic0 at ichiic0
> lm1 at iic0 addr 0x2d: W83627HF
> iic0: addr 0x2f 05=fc 06=fb 07=f0 08=fb 09=64 0a=64 0b=5e 0c=c8 0d=a3
> 0e=7b 0f=12 10=9a 11=c0 12=97 13=ff 14=1f 15=72 16=d1 17=7c 18=cb 19=cb
> 1a=c8 1b=09 1c=20 1d=90 1e=80 1f=80 20=21 21=1c 22=0b 24=73 26=69 28=6b
> 29=0f 2b=0f 2d=0f 2f=0f 31=0f 33=0f 35=0f 3b=ff 3c=ff 3d=ff 3e=ff 3f=ff
> 40=09 43=80 46=f7 47=ef 48=e3 49=7f 4a=3f 4b=02 4d=e0 4e=0f 50=06 51=1e
> 52=01 58=28 59=01 5c=1f 5e=55 5f=03 60=b9 61=73 62=b9 63=73 64=a5 65=87
> 66=ff 67=ff 68=3f 6a=2b 6b=18 6c=7c 6d=65 6e=e3 6f=b9 70=8a 71=70 72=e5
> 73=bb 74=e5 75=bb 76=e5 77=bb 78=3c 79=37 7a=55 7b=50 7c=3c 7d=37 7e=55
> 7f=50 80=3c 81=37 82=55 83=50 84=3c 85=37 86=55 87=50 88=50 89=4b 8a=55
> 8b=50 8c=32 8d=2d 8e=55 8f=50 90=07 91=68 92=07 93=68 94=07 95=68 96=07
> 97=68 98=07 99=68 9a=07 9b=68 9c=07 9d=68 9e=07 9f=68 a0=07 a1=68 a2=07
> a3=68 a4=ff a5=ff a6=ff a7=ff a8=f6 a9=f6 aa=f6 ab=f6 ae=ff af=ff b2=3f
> b3=3f b4=3f b5=3f b6=3f b7=3f b8=3f b9=3f ba=3f bb=89 bc=89 bd=89 be=89
> bf=89 c0=89 c1=89 c2=89 c3=02 c4=03 c5=7f c6=ff c9=ff ca=ff cb=ff cc=ff
> cd=ff ce=ff cf=ff d1=46 d2=46 d3=46 d4=46 d6=f0 d7=ff d8=80 d9=01 da=80
> db=01 dc=80 dd=01 de=80 df=01 e0=bb e1=c0 e2=82 e3=ff e4=80 e5=08 e6=fc
> e7=12 e8=ff e9=fe ea=c4 eb=e4 ec=ff ed=ff ee=ff ef=ff f6=60 f7=80 f8=1b
> fa=ff fd=10
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> wbwdg0 at isa0 port 0x2e/2: W83627HF : rev 0x41
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> lm0 at isa0 port 0x290/8: W83627HF
> lm1 detached
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> Kernelized RAIDframe activated
> dkcsum: wd0 matches BIOS drive 0x80
> dkcsum: wd1 matches BIOS drive 0x82
> dkcsum: wd2 matches BIOS drive 0x81
> dkcsum: wd3 matches BIOS drive 0x83
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> wd2(pciide1:1:0): timeout
> type: ata
> c_bcount: 32768
> c_skip: 0
> pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
> wd2a: device timeout reading fsbn 967493568 of 967493568-0 (wd2 bn
> 967493631; cn 959815 tn 1 sn 48), retrying
> wd2: soft error (corrected)
> wd2(pciide1:1:0): timeout
> type: ata
> c_bcount: 32768
> c_skip: 0
> pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
> wd2a: device timeout reading fsbn 976136192 of 976136192-0 (wd2 bn
> 976136255; cn 968389 tn 2 sn 17), retrying
> wd2: soft error (corrected)
> wd2(pciide1:1:0): timeout
> type: ata
> c_bcount: 65536
> c_skip: 0
> pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
> wd2a: device timeout reading fsbn 400116896 of 400116896-0 (wd2 bn
> 400116959; cn 396941 tn 6 sn 53), retrying
> wd2: soft error (corrected)
> wd2(pciide1:1:0): timeout
> type: ata
> c_bcount: 16384
> c_skip: 0
> pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
> wd2a: device timeout reading fsbn 926153408 of 926153408-0 (wd2 bn
> 926153471; cn 918803 tn 0 sn 47), retrying
> wd2: soft error (corrected)
> wd2(pciide1:1:0): timeout
> type: ata
> c_bcount: 49152
> c_skip: 0
> pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
> wd2a: device timeout reading fsbn 176823520 of 176823520-0 (wd2 bn
> 176823583; cn 175420 tn 3 sn 34), retrying
> wd2: soft error (corrected)
> wd2(pciide1:1:0): timeout
> type: ata
> c_bcount: 65536
> c_skip: 0
> pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
> wd2a: device timeout reading fsbn 371455328 of 371455328-0 (wd2 bn
> 371455391; cn 368507 tn 5 sn 20), retrying
> wd2: soft error (corrected)
> wd2(pciide1:1:0): timeout
> type: ata
> c_bcount: 65536
> c_skip: 0
> pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
> wd2a: device timeout reading fsbn 878043808 of 878043808-0 (wd2 bn
> 878043871; cn 871075 tn 4 sn 19), retrying
> wd2: soft error (corrected)
>
> dmesg from 2007-12-19
>
> OpenBSD 4.1 (GENERIC.esentire) #0: Wed Aug 15 20:55:55 UTC 2007
> xxxxxxxxxxxxxxxxxxxxxxx:/usr/src/sys/arch/i386/compile/GENERIC.esentire
> cpu0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
> 2.40 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> real mem = 3756482560 (3668440K)
> avail mem = 3445522432 (3364768K)
> using 4278 buffers containing 187949056 bytes (183544K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ BIOS, date 08/25/07, BIOS32 rev. 0 @ 0xfd470,
> SMBIOS rev. 2.51 @ 0xdfeea000 (31 entries)
> bios0: Supermicro PDSMi
> pcibios0 at bios0: rev 2.1 @ 0xfd470/0xb90
> pcibios0: PCI BIOS has 20 Interrupt Routing table entries
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
> pcibios0: PCI bus #15 is the last bus
> bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1000 0xcc000/0x1000
> 0xcd000/0x1000
> acpi at mainbus0 not configured
> ipmi at mainbus0 not configured
> mainbus0: Intel MP Specification (Version 1.4)
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 266 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
> 2.40 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
> 2.40 GHz
> cpu2:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
> 2.40 GHz
> cpu3:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> mainbus0: bus 0 is type PCI
> mainbus0: bus 9 is type PCI
> mainbus0: bus 10 is type PCI
> mainbus0: bus 13 is type PCI
> mainbus0: bus 14 is type PCI
> mainbus0: bus 15 is type PCI
> mainbus0: bus 16 is type ISA
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 5 pa 0xfec10000, version 20, 24 pins
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0xc0
> ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
> pci2 at ppb1 bus 9
> ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> pci3 at ppb2 bus 10
> em0 at pci3 dev 1 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 5
> int 0 (irq 11), address 00:0e:0c:c6:49:e0
> "Intel IOxAPIC" rev 0x09 at pci2 dev 0 function 1 not configured
> ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
> pci4 at ppb3 bus 13
> em1 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic 4
> int 16 (irq 11), address 00:30:48:91:3e:f0
> ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
> pci5 at ppb4 bus 14
> em2 at pci5 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 4
> int 17 (irq 12), address 00:30:48:91:3e:f1
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 4 int
> 23 (irq 10)
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 4 int
> 19 (irq 11)
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 4 int
> 18 (irq 5)
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 4 int
> 16 (irq 11)
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 4 int
> 23 (irq 10)
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
> pci6 at ppb5 bus 15
> vga1 at pci6 dev 0 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-N, 1.AA> SCSI0 5/cdrom
> removable
> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 4 int 19 (irq 11) for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <WDC WD3200YS-01PGB0>
> wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> wd1 at pciide1 channel 0 drive 1: <WDC WD5000ABYS-01TNA0>
> wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
> wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
> wd2 at pciide1 channel 1 drive 0: <WDC WD5000YS-01MPB0>
> wd2: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
> wd3 at pciide1 channel 1 drive 1: <WDC WD5000ABYS-01TNA0>
> wd3: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
> wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
> wd3(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 4
> int 19 (irq 11)
> iic0 at ichiic0
> lm1 at iic0 addr 0x2d: W83627HF
> iic0: addr 0x2f 05=fc 06=fb 07=fc 08=fb 09=64 0a=64 0b=5e 0c=c8 0d=a3
> 0e=7b 0f=12 10=9a 11=c0 12=97 13=ff 14=1f 15=72 16=d1 17=7c 18=ca 19=c9
> 1a=c8 1b=0d 1c=21 1d=91 1e=80 1f=80 20=21 21=1e 22=09 24=71 26=6b 28=6c
> 29=0f 2b=0f 2d=0f 2f=0f 31=0f 33=0f 35=0f 3b=ff 3c=ff 3d=ff 3e=ff 3f=ff
> 40=09 43=80 44=40 46=f7 47=ef 48=e3 49=7f 4a=3f 4b=02 4d=e0 4e=0f 50=06
> 51=1e 52=01 58=28 59=01 5c=1f 5e=55 5f=03 60=b9 61=73 62=b9 63=73 64=a5
> 65=87 66=ff 67=ff 68=3f 6a=2b 6b=18 6c=7c 6d=65 6e=e3 6f=b9 70=8a 71=70
> 72=e5 73=bb 74=e5 75=bb 76=e5 77=bb 78=3c 79=37 7a=55 7b=50 7c=3c 7d=37
> 7e=55 7f=50 80=3c 81=37 82=55 83=50 84=3c 85=37 86=55 87=50 88=50 89=4b
> 8a=55 8b=50 8c=32 8d=2d 8e=55 8f=50 90=07 91=68 92=07 93=68 94=07 95=68
> 96=07 97=68 98=07 99=68 9a=07 9b=68 9c=07 9d=68 9e=07 9f=68 a0=07 a1=68
> a2=07 a3=68 a4=ff a5=ff a6=ff a7=ff a8=f6 a9=f6 aa=f6 ab=f6 ae=ff af=ff
> b2=3f b3=3f b4=3f b5=3f b6=3f b7=3f b8=3f b9=3f ba=3f bb=89 bc=89 bd=89
> be=89 bf=89 c0=89 c1=89 c2=89 c3=02 c4=03 c5=7f c6=ff c9=ff ca=ff cb=ff
> cc=ff cd=ff ce=ff cf=ff d1=46 d2=46 d3=46 d4=46 d6=f0 d7=ff d8=80 d9=01
> da=80 db=01 dc=80 dd=01 de=80 df=01 e0=bb e1=c0 e2=82 e3=ff e4=80 e5=2a
> e6=fc e7=13 e8=ff ea=24 eb=c4 ec=ff ed=ff ee=ff ef=ff f6=60 f7=80 f8=1b
> fa=ff fd=10
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> wbwdg0 at isa0 port 0x2e/2: W83627HF : rev 0x41
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> lm0 at isa0 port 0x290/8: W83627HF
> lm1 detached
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> Kernelized RAIDframe activated
> dkcsum: wd0 matches BIOS drive 0x80
> dkcsum: wd1 matches BIOS drive 0x82
> dkcsum: wd2 matches BIOS drive 0x81
> dkcsum: wd3 matches BIOS drive 0x83
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> WARNING: / was not properly unmounted
> uid 0 on /: file system full
> wd0(pciide1:0:0): timeout
> type: ata
> c_bcount: 65536
> c_skip: 0
> pciide1:0:0: bus-master DMA error: missing interrupt, status=0x61
> wd0e: device timeout reading fsbn 61710496 of 61710496-0 (wd0 bn
> 279814480; cn 277593 tn 11 sn 43), retrying
> wd0: soft error (corrected)
>
> --
> Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
