Hi Everyone
I would like to revisit a problem I was unable to solve about a year ago,
an error messages I was getting about pciide temouts. Several times we
have had hard drives that will display the following error and then the
computer freezes:
wd1(pciide1:1:0): timeout
type: ata
c_bcount: 65536
c_skip: 0
pciide1:1:0: bus-master DMA error: missing interrupt, status=0x21
I tried to find the source of this problem and could not. I'm willing to
accept that this could be due to a dying hard drive, overheated hard
drive, or any similar causes except for a loose cable.
The second error is very similar but does not make the computer lock up. I
have been having this problem on many computers and more frequently than
the above error. It doesn't seem to have any direct side effects. But the
other day I noticed the error on one of my computers and we were having
speed troubles with one of the disks. So we tried to reboot and for some
reason the system got stuck and the watchdog didnt reboot the machine. I
have no idea if this problem is linked to the hard drive error.
Anyways, here is the error:
wd2(pciide1:1:0): timeout
type: ata
c_bcount: 49152
c_skip: 0
pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
wd2a: device timeout reading fsbn 176823520 of 176823520-0 (wd2 bn
176823583; cn 175420 tn 3 sn 34), retrying
wd2: soft error (corrected)
Does anybody know what this is and if its a bad thing? I have attached the
dmesg from a computer the last two times it got the error.
Thanks
Jonathan Steel
dmesg from 2008-01-22
OpenBSD 4.1 (GENERIC.esentire) #0: Wed Aug 15 20:55:55 UTC 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.esentire
cpu0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem = 3756482560 (3668440K)
avail mem = 3445522432 (3364768K)
using 4278 buffers containing 187949056 bytes (183544K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 08/25/07, BIOS32 rev. 0 @ 0xfd470,
SMBIOS rev. 2.51 @ 0xdfeea000 (31 entries)
bios0: Supermicro PDSMi
pcibios0 at bios0: rev 2.1 @ 0xfd470/0xb90
pcibios0: PCI BIOS has 20 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #15 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1000 0xcc000/0x1000
0xcd000/0x1000
acpi at mainbus0 not configured
ipmi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
mainbus0: bus 0 is type PCI
mainbus0: bus 9 is type PCI
mainbus0: bus 10 is type PCI
mainbus0: bus 13 is type PCI
mainbus0: bus 14 is type PCI
mainbus0: bus 15 is type PCI
mainbus0: bus 16 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec10000, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0xc0
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 9
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 10
em0 at pci3 dev 1 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 5
int 0 (irq 11), address 00:0e:0c:c6:49:e0
"Intel IOxAPIC" rev 0x09 at pci2 dev 0 function 1 not configured
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 13
em1 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic 4
int 16 (irq 11), address 00:30:48:91:3e:f0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 14
em2 at pci5 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 4
int 17 (irq 12), address 00:30:48:91:3e:f1
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 4 int
23 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 4 int
19 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 4 int
18 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 4 int
16 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 4 int
23 (irq 10)
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 15
vga1 at pci6 dev 0 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-N, 1.AA> SCSI0 5/cdrom
removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD3200YS-01PGB0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd1 at pciide1 channel 0 drive 1: <WDC WD5000ABYS-01TNA0>
wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide1 channel 1 drive 0: <WDC WD5000YS-01MPB0>
wd2: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd3 at pciide1 channel 1 drive 1: <WDC WD5000ABYS-01TNA0>
wd3: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
wd3(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 4
int 19 (irq 11)
iic0 at ichiic0
lm1 at iic0 addr 0x2d: W83627HF
iic0: addr 0x2f 05=fc 06=fb 07=f0 08=fb 09=64 0a=64 0b=5e 0c=c8 0d=a3
0e=7b 0f=12 10=9a 11=c0 12=97 13=ff 14=1f 15=72 16=d1 17=7c 18=cb 19=cb
1a=c8 1b=09 1c=20 1d=90 1e=80 1f=80 20=21 21=1c 22=0b 24=73 26=69 28=6b
29=0f 2b=0f 2d=0f 2f=0f 31=0f 33=0f 35=0f 3b=ff 3c=ff 3d=ff 3e=ff 3f=ff
40=09 43=80 46=f7 47=ef 48=e3 49=7f 4a=3f 4b=02 4d=e0 4e=0f 50=06 51=1e
52=01 58=28 59=01 5c=1f 5e=55 5f=03 60=b9 61=73 62=b9 63=73 64=a5 65=87
66=ff 67=ff 68=3f 6a=2b 6b=18 6c=7c 6d=65 6e=e3 6f=b9 70=8a 71=70 72=e5
73=bb 74=e5 75=bb 76=e5 77=bb 78=3c 79=37 7a=55 7b=50 7c=3c 7d=37 7e=55
7f=50 80=3c 81=37 82=55 83=50 84=3c 85=37 86=55 87=50 88=50 89=4b 8a=55
8b=50 8c=32 8d=2d 8e=55 8f=50 90=07 91=68 92=07 93=68 94=07 95=68 96=07
97=68 98=07 99=68 9a=07 9b=68 9c=07 9d=68 9e=07 9f=68 a0=07 a1=68 a2=07
a3=68 a4=ff a5=ff a6=ff a7=ff a8=f6 a9=f6 aa=f6 ab=f6 ae=ff af=ff b2=3f
b3=3f b4=3f b5=3f b6=3f b7=3f b8=3f b9=3f ba=3f bb=89 bc=89 bd=89 be=89
bf=89 c0=89 c1=89 c2=89 c3=02 c4=03 c5=7f c6=ff c9=ff ca=ff cb=ff cc=ff
cd=ff ce=ff cf=ff d1=46 d2=46 d3=46 d4=46 d6=f0 d7=ff d8=80 d9=01 da=80
db=01 dc=80 dd=01 de=80 df=01 e0=bb e1=c0 e2=82 e3=ff e4=80 e5=08 e6=fc
e7=12 e8=ff e9=fe ea=c4 eb=e4 ec=ff ed=ff ee=ff ef=ff f6=60 f7=80 f8=1b
fa=ff fd=10
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
wbwdg0 at isa0 port 0x2e/2: W83627HF : rev 0x41
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
lm1 detached
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
Kernelized RAIDframe activated
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x82
dkcsum: wd2 matches BIOS drive 0x81
dkcsum: wd3 matches BIOS drive 0x83
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wd2(pciide1:1:0): timeout
type: ata
c_bcount: 32768
c_skip: 0
pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
wd2a: device timeout reading fsbn 967493568 of 967493568-0 (wd2 bn
967493631; cn 959815 tn 1 sn 48), retrying
wd2: soft error (corrected)
wd2(pciide1:1:0): timeout
type: ata
c_bcount: 32768
c_skip: 0
pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
wd2a: device timeout reading fsbn 976136192 of 976136192-0 (wd2 bn
976136255; cn 968389 tn 2 sn 17), retrying
wd2: soft error (corrected)
wd2(pciide1:1:0): timeout
type: ata
c_bcount: 65536
c_skip: 0
pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
wd2a: device timeout reading fsbn 400116896 of 400116896-0 (wd2 bn
400116959; cn 396941 tn 6 sn 53), retrying
wd2: soft error (corrected)
wd2(pciide1:1:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
wd2a: device timeout reading fsbn 926153408 of 926153408-0 (wd2 bn
926153471; cn 918803 tn 0 sn 47), retrying
wd2: soft error (corrected)
wd2(pciide1:1:0): timeout
type: ata
c_bcount: 49152
c_skip: 0
pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
wd2a: device timeout reading fsbn 176823520 of 176823520-0 (wd2 bn
176823583; cn 175420 tn 3 sn 34), retrying
wd2: soft error (corrected)
wd2(pciide1:1:0): timeout
type: ata
c_bcount: 65536
c_skip: 0
pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
wd2a: device timeout reading fsbn 371455328 of 371455328-0 (wd2 bn
371455391; cn 368507 tn 5 sn 20), retrying
wd2: soft error (corrected)
wd2(pciide1:1:0): timeout
type: ata
c_bcount: 65536
c_skip: 0
pciide1:1:0: bus-master DMA error: missing interrupt, status=0x61
wd2a: device timeout reading fsbn 878043808 of 878043808-0 (wd2 bn
878043871; cn 871075 tn 4 sn 19), retrying
wd2: soft error (corrected)
dmesg from 2007-12-19
OpenBSD 4.1 (GENERIC.esentire) #0: Wed Aug 15 20:55:55 UTC 2007
xxxxxxxxxxxxxxxxxxxxxxx:/usr/src/sys/arch/i386/compile/GENERIC.esentire
cpu0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem = 3756482560 (3668440K)
avail mem = 3445522432 (3364768K)
using 4278 buffers containing 187949056 bytes (183544K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 08/25/07, BIOS32 rev. 0 @ 0xfd470,
SMBIOS rev. 2.51 @ 0xdfeea000 (31 entries)
bios0: Supermicro PDSMi
pcibios0 at bios0: rev 2.1 @ 0xfd470/0xb90
pcibios0: PCI BIOS has 20 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #15 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1000 0xcc000/0x1000
0xcd000/0x1000
acpi at mainbus0 not configured
ipmi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
mainbus0: bus 0 is type PCI
mainbus0: bus 9 is type PCI
mainbus0: bus 10 is type PCI
mainbus0: bus 13 is type PCI
mainbus0: bus 14 is type PCI
mainbus0: bus 15 is type PCI
mainbus0: bus 16 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec10000, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0xc0
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 9
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 10
em0 at pci3 dev 1 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 5
int 0 (irq 11), address 00:0e:0c:c6:49:e0
"Intel IOxAPIC" rev 0x09 at pci2 dev 0 function 1 not configured
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 13
em1 at pci4 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic 4
int 16 (irq 11), address 00:30:48:91:3e:f0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 14
em2 at pci5 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 4
int 17 (irq 12), address 00:30:48:91:3e:f1
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 4 int
23 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 4 int
19 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 4 int
18 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 4 int
16 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 4 int
23 (irq 10)
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 15
vga1 at pci6 dev 0 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-N, 1.AA> SCSI0 5/cdrom
removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD3200YS-01PGB0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd1 at pciide1 channel 0 drive 1: <WDC WD5000ABYS-01TNA0>
wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide1 channel 1 drive 0: <WDC WD5000YS-01MPB0>
wd2: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd3 at pciide1 channel 1 drive 1: <WDC WD5000ABYS-01TNA0>
wd3: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
wd3(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 4
int 19 (irq 11)
iic0 at ichiic0
lm1 at iic0 addr 0x2d: W83627HF
iic0: addr 0x2f 05=fc 06=fb 07=fc 08=fb 09=64 0a=64 0b=5e 0c=c8 0d=a3
0e=7b 0f=12 10=9a 11=c0 12=97 13=ff 14=1f 15=72 16=d1 17=7c 18=ca 19=c9
1a=c8 1b=0d 1c=21 1d=91 1e=80 1f=80 20=21 21=1e 22=09 24=71 26=6b 28=6c
29=0f 2b=0f 2d=0f 2f=0f 31=0f 33=0f 35=0f 3b=ff 3c=ff 3d=ff 3e=ff 3f=ff
40=09 43=80 44=40 46=f7 47=ef 48=e3 49=7f 4a=3f 4b=02 4d=e0 4e=0f 50=06
51=1e 52=01 58=28 59=01 5c=1f 5e=55 5f=03 60=b9 61=73 62=b9 63=73 64=a5
65=87 66=ff 67=ff 68=3f 6a=2b 6b=18 6c=7c 6d=65 6e=e3 6f=b9 70=8a 71=70
72=e5 73=bb 74=e5 75=bb 76=e5 77=bb 78=3c 79=37 7a=55 7b=50 7c=3c 7d=37
7e=55 7f=50 80=3c 81=37 82=55 83=50 84=3c 85=37 86=55 87=50 88=50 89=4b
8a=55 8b=50 8c=32 8d=2d 8e=55 8f=50 90=07 91=68 92=07 93=68 94=07 95=68
96=07 97=68 98=07 99=68 9a=07 9b=68 9c=07 9d=68 9e=07 9f=68 a0=07 a1=68
a2=07 a3=68 a4=ff a5=ff a6=ff a7=ff a8=f6 a9=f6 aa=f6 ab=f6 ae=ff af=ff
b2=3f b3=3f b4=3f b5=3f b6=3f b7=3f b8=3f b9=3f ba=3f bb=89 bc=89 bd=89
be=89 bf=89 c0=89 c1=89 c2=89 c3=02 c4=03 c5=7f c6=ff c9=ff ca=ff cb=ff
cc=ff cd=ff ce=ff cf=ff d1=46 d2=46 d3=46 d4=46 d6=f0 d7=ff d8=80 d9=01
da=80 db=01 dc=80 dd=01 de=80 df=01 e0=bb e1=c0 e2=82 e3=ff e4=80 e5=2a
e6=fc e7=13 e8=ff ea=24 eb=c4 ec=ff ed=ff ee=ff ef=ff f6=60 f7=80 f8=1b
fa=ff fd=10
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
wbwdg0 at isa0 port 0x2e/2: W83627HF : rev 0x41
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
lm1 detached
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
Kernelized RAIDframe activated
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x82
dkcsum: wd2 matches BIOS drive 0x81
dkcsum: wd3 matches BIOS drive 0x83
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
uid 0 on /: file system full
wd0(pciide1:0:0): timeout
type: ata
c_bcount: 65536
c_skip: 0
pciide1:0:0: bus-master DMA error: missing interrupt, status=0x61
wd0e: device timeout reading fsbn 61710496 of 61710496-0 (wd0 bn
279814480; cn 277593 tn 11 sn 43), retrying
wd0: soft error (corrected)
--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
