Hello

I've noticed this problem on many different INTEL motherboard models.
Debugging showed that under the address where acpi structures should be 
are actually zeros.
So there is probably some memory mapping problem.

regards
M.K.

Marcos Laufer pisze:
> Hello , i tried updating the BIOS to the newest one, removed one ram stick,  
> installed
> latest snapshot and also tried disabling APM as you adviced me.
> When booting with bsd it doesn't recognize the devices just like before.
> Now i also tried booting with bsd.mp instead of bsd , and i get this error:
>
>
> OpenBSD 4.2-current (GENERIC.MP) #539: Tue Jan 8 17:20:15 MST 2008
>             [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> RTC BIOS diagnostic error 80<clock_battery>
> cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class) 
> 2.39 GHz
> cpu0: 
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>  
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, 
> xTPR
> real mem = 1040625664 (992mb)
> avail mem = 998227968 (951mb)
> RTC BIOS diagnostic error 80<clock_battery>
> mainbus0 at root
> bios0 at mainbus0: at/286+ BIOS, date 12/10/07, SMBIOS rev. 2.4 @ 0xe2440 (31 
> entries)
> bios0: vendor Intel Corp. version "JOQ3510J.86A.0731.2007.1210.2204" date 
> 12/10/2007
> bios0: Intel Corporation DQ35MP
> acpi0 at bios0: rev 0panic: malloc: allocation too large
> Stopped at        Debugger+0x4:  leave
> Debugger(e3ff000,0,d0916b48,2,3ffffff7) at Debugger+0x4
> panic(d06b38ce,d0916b64,1000,d07b0a20,ffffffff) at panic+0x63
> malloc(f000ff5b,2,1,d0680060) at malloc+0x76
> acpi_load_table(0,f000ff53,d19cce3c,de3fe000,d19c1f80) at acpi_load_table+0x19
> acpi_loadtables(d19cce00,de3fd020,5,e) at acpi_loadtables+0x95
> acpi_attach(d19cbf80,d19cce00,d0916d50,d19cbf80,0) at acpi_attach+0xb2
> config_attach(d19cbf80,d078b980,d0916d50,d0604eb4) at config_attach+0xfd
> biosattach(d19cbfc0,d19cbf80,d0916e80,d19cbfc0,d02032c9) at biosattach+0x34e
> config_attach(d19cbfc0,d078ab70,d0916e80,d04a6504,d06d6958) at 
> config_attach+0xfd
> mainbus_attach(0,d19cbfc0,0,de3f7000,d0915334) at mainbus_attach+0x3d
> RUN AT LEAST ...
>
> Regards,
> Marcos
>
> ----- Original Message ----- 
> From: "Pierre Riteau" <[EMAIL PROTECTED]>
> To: "Marcos Laufer" <[EMAIL PROTECTED]>
> Cc: <misc@openbsd.org>
> Sent: Thursday, December 13, 2007 8:55 PM
> Subject: Re: Intel DQ35MP
>
>
> On Dec 13, 2007 9:25 PM, Marcos Laufer <[EMAIL PROTECTED]> wrote:
>   
>> Hello,
>>
>> I've just installed OpenBSD current on an Intel DQ35MP motherboard with a 
>> Quad
>> processor, this is the
>> dmesg log. Some devices are not recognized (PCI slot, ethernet, etc)
>>     
>
> boot -c to go in UKC or config -ef /bsd and use 'disable apm'
> to get acpi to attach. Maybe it will help.
> Also, you can get a newer snapshot.
>
>   
>> OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007
>>     [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
>> RTC BIOS diagnostic error 80<clock_battery>
>> cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)
>> 2.39 GHz
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
>> xTPR
>> real mem  = 2097643520 (2000MB)
>> avail mem = 2020409344 (1926MB)
>> RTC BIOS diagnostic error 80<clock_battery>
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 07/26/07, SMBIOS rev. 2.4 @ 0xe2460 (30
>> entries)
>> bios0: vendor Intel Corp. version "JOQ3510J.86A.0559.2007.0726.0425" date
>> 07/26/2007
>> bios0: Intel Corporation DQ35MP
>> apm0 at bios0: Power Management spec V1.2
>> apm0: battery life expectancy 0%
>> apm0: AC off, battery charge unknown, estimated 0:00 hours
>> pcibios at bios0 function 0x1a not configured
>> bios0: ROM list: 0xc0000/0xb400! 0xcb800/0x1e00! 0xcd800/0x1000
>> 0xce800/0x1000
>> cpu0 at mainbus0
>> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
>> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x29b0 rev
>> 0x02
>> vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x29b2 rev 
>> 0x02:
>> aperture at 0x90200000, size 0x8000000
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> vendor "Intel", unknown product 0x29b4 (class communications subclass
>> miscellaneous, rev 0x02) at pci0 dev 3 function 0 not configured
>> pciide0 at pci0 dev 3 function 2 vendor "Intel", unknown product 0x29b6 rev
>> 0x02: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to
>> native-PCI
>> pciide0: using irq 9 for native-PCI interrupt
>> pciide0: channel 0 ignored (not responding; disabled or no drives?)
>> pciide0: channel 1 ignored (not responding; disabled or no drives?)
>> vendor "Intel", unknown product 0x29b7 (class communications subclass serial,
>> rev 0x02) at pci0 dev 3 function 3 not configured
>> "Intel ICH9 IGP AMT" rev 0x02 at pci0 dev 25 function 0 not configured
>> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: irq 9
>> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: irq 9
>> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: irq 10
>> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: irq 10
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02
>> pci1 at ppb0 bus 1
>> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x02
>> pci2 at ppb1 bus 2
>> ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02
>> pci3 at ppb2 bus 3
>> pciide1 at pci3 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA
>> (unsupported), channel 0 configured to native-PCI, channel 1 configured to
>> native-PCI
>> pciide1: using irq 9 for native-PCI interrupt
>> pciide1: channel 0 ignored (not responding; disabled or no drives?)
>> pciide1: channel 1 ignored (not responding; disabled or no drives?)
>> ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02
>> pci4 at ppb3 bus 4
>> ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02
>> pci5 at ppb4 bus 5
>> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: irq 10
>> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: irq 11
>> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: irq 9
>> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: irq 10
>> usb1 at ehci1: USB revision 2.0
>> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x92
>> pci6 at ppb5 bus 6
>> ichpcib0 at pci0 dev 31 function 0 "Intel 82801IO LPC" rev 0x02: PM disabled
>> ahci0 at pci0 dev 31 function 2 vendor "Intel", unknown product 0x2922 rev
>> 0x02: irq 9, AHCI 1.2
>> scsibus0 at ahci0: 32 targets
>> sd0 at scsibus0 targ 1 lun 0: <ATA, WDC WD3200AAKS-0, 12.0> SCSI2 0/direct
>> fixed
>> sd0: 305245MB, 38913 cyl, 255 head, 63 sec, 512 bytes/sec, 625142448 sec
>> total
>> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: irq 9
>> iic0 at ichiic0
>> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
>> spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
>> usb2 at uhci0: USB revision 1.0
>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb3 at uhci1: USB revision 1.0
>> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb4 at uhci2: USB revision 1.0
>> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb5 at uhci3: USB revision 1.0
>> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb6 at uhci4: USB revision 1.0
>> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb7 at uhci5: USB revision 1.0
>> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at ichpcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pcppi0 at isa0 port 0x61
>> midi0 at pcppi0: <PC speaker>
>> spkr0 at pcppi0
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> biomask fffd netmask fffd ttymask ffff
>> mtrr: Pentium Pro MTRR support
>> uhidev0 at uhub7 port 1 configuration 1 interface 0 "vendor 0x13ba Generic 
>> USB
>> K/B" rev 1.10/0.01 addr 2
>> uhidev0: iclass 3/1
>> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
>> wskbd1 at ukbd0 mux 1
>> wskbd1: connecting to wsdisplay0
>> uhidev1 at uhub7 port 1 configuration 1 interface 1 "vendor 0x13ba Generic 
>> USB
>> K/B" rev 1.10/0.01 addr 2
>> uhidev1: iclass 3/1, 2 report ids
>> ums0 at uhidev1 reportid 1: 3 buttons and Z dir.
>> wsmouse0 at ums0 mux 0
>> uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
>> dkcsum: sd0 matches BIOS drive 0x80
>> root on sd0a swap on sd0b dump on sd0b
>> umass0 at uhub0 port 5 configuration 1 interface 0 "USB Audio Player" rev
>> 2.00/0.02 addr 2
>> umass0: using SCSI over Bulk-Only
>> scsibus1 at umass0: 2 targets
>> sd1 at scsibus1 targ 1 lun 0: <, Audio Player, \\001> SCSI0 0/direct
>> removable
>> sd1: 968MB, 123 cyl, 255 head, 63 sec, 512 bytes/sec, 1984000 sec total
>>
>> Regards,
>>
>> Marcos Laufer

Reply via email to