Here is new dmesg from working system:
Thanks for your help!
Bruce
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1071693824 (1046576K)
avail mem = 970477568 (947732K)
using 4278 buffers containing 53706752 bytes (52448K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/02/03, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (60 entries)
bios0: Dell Computer Corporation Dimension 2400
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeae0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb800 0xcb800/0x4800 0xd0000/0x1800! 0xd1800/0x2800
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G/GL" rev 0x01
vga1 at pci0 dev 2 function 0 "Intel 82845G/GL Video" rev 0x01:
aperture at 0xe8000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 5
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x81
pci1 at ppb0 bus 1
pciide0 at pci1 dev 6 function 0 "CMD Technology SiI3512 SATA" rev 0x01: DMA
pciide0: using irq 9 for native-PCI interrupt
pciide0: port 1: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 1 drive 0: <ST3320820AS>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
bce0 at pci1 dev 9 function 0 "Broadcom BCM4401" rev 0x01: irq 3,
address 00:0f:1f:58:03:2b
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01
pciide1 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd1 at pciide1 channel 0 drive 0: <WDC WD400BB-75FJA1>
wd1: 16-sector PIO, LBA, 38146MB, 78125000 sectors
wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, COMBO SOHC-5236V, R$0K> SCSI0
5/cdrom removable
wd2 at pciide1 channel 1 drive 1: <WDC WD300BB-75DEA0>
wd2: 16-sector PIO, LBA, 28610MB, 58593750 sectors
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
wd2(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 3
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 3, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef6d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x82
dkcsum: wd1 matches BIOS drive 0x80
dkcsum: wd2 matches BIOS drive 0x81
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
On 6/18/07, Bruce Bauer <[EMAIL PROTECTED]> wrote:
You nailed it down!
After boot>-s, examining the dmesg shows the SATA drive is wd0 and the
former wd0 is wd1 and the former wd1 is wd2. Now if my thinking is
correct, all I should have to do is edit fstab to reflect the changed
drive positions and the system should be happy.
On 6/18/07, Stuart Henderson <[EMAIL PROTECTED]> wrote:
> On 2007/06/18 11:53, Bruce Bauer wrote:
> > Anybody with a relavent cluebat is welcome to give me a whack.
>
> boot -s, look at disklabels and/or manually mount partitions and work
> out what's showing up where. Perhaps the SATA drive appears as wd0 and
> shunts the other drives along.
