Hi,
Thank you very much.
netstat -ni will not show a single error on any of the three interfaces.
I do not think it has anything to do with PF, because the problem
happens even with a pass quick rule.
I use dlink DGE-530T nics and one onboard vr0.
sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:13:46:71:f2:fa
media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause)
status: active
inet 200.232.120.1 netmask 0xffffff00 broadcast 200.232.120.255
inet6 fe80::213:46ff:fe71:f2fa%sk0 prefixlen 64 scopeid 0x1
sk1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:13:46:71:f3:4a
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 200.232.140.3 netmask 0xffffff00 broadcast 200.232.140.255
inet6 fe80::213:46ff:fe71:f34a%sk1 prefixlen 64 scopeid 0x2
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:16:ec:54:4b:e2
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 172.16.255.1 netmask 0xffffff00 broadcast 172.16.255.255
inet6 fe80::216:ecff:fe54:4be2%vr0 prefixlen 64 scopeid 0x3
Could you say something about the RTM_ADD messages? are they normal?
I see quite a lot of them (only a few RTM_LOSING).
Regards,
Jeff.
--
Get a Free E-mail Account at Mail.com!
Choose From 100+ Personalized Domains
Visit http://www.mail.com today
