I had a problem with a 3945ABG, too. After using the current firmware for
this chipset (from the intel website), it worked. The 1.13 firmware did not
work for me.
ciao
Christof
On 5/10/07, abutter gao <[EMAIL PROTECTED]> wrote:
> I'm sorry for asking this again, but I really can't use the 3945ABG on
> amd64 platform now .
>
> I installed openbsd-current, download the firmware from
> http://damien.bergamini.free.fr/packages/openbsd/wpi-firmware-1.13.tgz,
> and then added "-A i386" to pkg_add to ignore the
> platform-incompatible problem.
>
> I copied the bsd.mp and enabled acpi by config, but the 3945ABG did not
> works.
>
> Here are some information that may be usefully:
>
> #dhclient wpi0
> wpi0: not found
> exiting.
> #ifconfig -a
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33192
> groups: lo
> inet 127.0.0.1 netmask 0xff000000
> inet6 ::1 prefixlen 128
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
> wpi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:18:de:bc:42:78
> groups: wlan
> media: IEEE802.11 autoselect
> status: no network
> ieee80211: nwid "" 100dBm
> inet6 fe80::218:deff:febc:4278%wpi0 prefixlen 64 scopeid 0x1
> fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:16:d3:18:77:46
> media: Ethernet autoselect (none)
> status: no carrier
> enc0: flags=0<> mtu 1536
>
> And below is my dmesg.boot:
> OpenBSD 4.1-current (GENERIC.MP) #1217: Fri May 4 01:13:15 MDT 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 1063383040 (1038460K)
> avail mem = 899076096 (878004K)
> using 22937 buffers containing 106545152 bytes (104048K) of memory
> mainbus0 (root)
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdc010 (28 entries)
> bios0: Hewlett-Packard Presario V3000 (RQ125PA#AB2)
> acpi0 at mainbus0: rev 0
> acpi0: tables DSDT FACP APIC BOOT MCFG APIC SSDT SSDT
> acpitimer at acpi0 not configured
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz, 1596.29 MHz
> cpu0:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
> cpu0: 2MB 64b/line 8-way L2 cache
> cpu0: apic clock running at 132MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz, 1596.00 MHz
> cpu1:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
> cpu1: 2MB 64b/line 8-way L2 cache
> ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 0 (PEGP)
> acpiprt2 at acpi0: bus 2 (RP01)
> acpiprt3 at acpi0: bus 4 (RP03)
> acpiprt4 at acpi0: bus 5 (RP04)
> acpiprt5 at acpi0: bus 8 (PCIB)
> acpiec0 at acpi0: EC0_
> acpicpu at acpi0 not configured
> acpicpu at acpi0 not configured
> acpitz at acpi0 not configured
> acpitz at acpi0 not configured
> acpibtn at acpi0 not configured
> acpibtn at acpi0 not configured
> acpibtn at acpi0 not configured
> acpibat at acpi0 not configured
> acpiac at acpi0 not configured
> pci0 at mainbus0 bus 0: configuration mode 1
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
> apic 1 int 22 (irq 11)
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: 0x14f1/0x5047 (rev. 0.0), HDA version 1.0
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
> pci2 at ppb1 bus 4
> ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
> pci3 at ppb2 bus 5
> wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
> apic 1 int 19 (irq 10), address 00:18:de:bc:42:78
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1
> int 23 (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1
> int 19 (irq 10)
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1
> int 21 (irq 10)
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1
> int 16 (irq 11)
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1
> int 23 (irq 11)
> ehci0: timed out waiting for BIOS
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0
> uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub0: 8 ports with 8 removable, self powered
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci4 at ppb3 bus 8
> fxp0 at pci4 dev 8 function 0 "Intel PRO/100 VM" rev 0x02, i82562:
> apic 1 int 20 (irq 11), address 00:16:d3:18:77:46
> inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
> "Ricoh 5C832 Firewire" rev 0x00 at pci4 dev 9 function 0 not configured
> sdhc0 at pci4 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x19: apic 1
> int 18 (irq 10)
> sdmmc0 at sdhc0
> "Ricoh 5C843" rev 0x01 at pci4 dev 9 function 2 not configured
> "Ricoh 5C592 Memory Stick" rev 0x0a at pci4 dev 9 function 3 not configured
> "Ricoh 5C852 xD" rev 0x05 at pci4 dev 9 function 4 not configured
> pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA770 DVD/CDRW, 1.03> SCSI0
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI SATA" rev 0x02:
> AHCI 1.1: apic 1 int 19 (irq 10)
> ahci0: PHY offline on port 2
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, FUJITSU MHV2120B, 892C> SCSI2 0/direct
> fixed
> sd0: 114473MB, 14593 cyl, 255 head, 63 sec, 512 bytes/sec, 234441648 sec
> total
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic
> 1 int 19 (irq 10)
> iic0 at ichiic0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4
> uhub4: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub4: 2 ports with 2 removable, self powered
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> uhidev0 at uhub2 port 1 configuration 1 interface 0
> uhidev0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse1 at ums0 mux 0
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
> wpi0: timeout waiting for thermal sensors calibration
> wpi0: timeout waiting for thermal sensors calibration
> wpi0: fatal firmware error
