I have several servers with the same problem. The solution has always been to
disable
one or two drivers that conflicts. To be able to upgrade the servers (DL380 G4)
we have that uses
Adaptec 2101S cards we had to disable iopsp* driver on boot. Before we had to
disable
the ciss driver on some servers. One server that uses LSI MegaRAID 310-1 we
haven't been able
to find the correct driver that conflicts. So we had to switch RAID-card :-(
/Jonas
Antti Harri wrote:
> Hello,
>
> I have a machine that I'm not able to upgrade
> because the machine won't boot newer kernels.
> They're hanging right after SATA init and it
> also displays different SATA/pciide chip model
> (VT6420) than with 3.8.
>
> I've tried 3.9-release from official CD, 4.0-release
> and 4.1-release kernels and some snapshots.
>
> hw.machine=i386
> hw.model=AMD Athlon(TM) XP 1700+ ("AuthenticAMD" 686-class, 256KB L2 cache)
> hw.ncpu=1
> hw.byteorder=1234
> hw.physmem=267988992
> hw.usermem=267653120
> hw.pagesize=4096
> hw.disknames=wd0,cd0,fd0
> hw.diskcount=3
> hw.sensors.3=it0, VCORE_A, volts_dc, 1.84 V
> hw.sensors.4=it0, VCORE_B, volts_dc, 0.00 V
> hw.sensors.5=it0, +3.3V, volts_dc, 3.22 V
> hw.sensors.6=it0, +5V, volts_dc, 4.92 V
> hw.sensors.7=it0, +12V, volts_dc, 11.97 V
> hw.sensors.8=it0, Unused, volts_dc, -8.60 V
> hw.sensors.9=it0, -12V, volts_dc, -17.00 V
> hw.sensors.10=it0, +5VSB, volts_dc, 5.00 V
> hw.sensors.11=it0, VBAT, volts_dc, 4.08 V
> hw.sensors.12=it0, Temp1, temp, 47.00 degC / 116.60 degF
> hw.sensors.13=it0, Temp2, temp, 37.00 degC / 98.60 degF
> hw.sensors.14=it0, Temp3, temp, 127.00 degC / 260.60 degF
> hw.cpuspeed=1467
>
>
> OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD Athlon(TM) XP 1700+ ("AuthenticAMD" 686-class, 256KB L2 cache)
> 1.47 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
>
> cpu0: AMD Powernow: FID
> real mem = 267988992 (261708K)
> avail mem = 237649920 (232080K)
> using 3296 buffers containing 13500416 bytes (13184K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(48) BIOS, date 06/28/05, BIOS32 rev. 0 @ 0xf1940
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x1ff2
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1f20/208 (11 entries)
> pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C586 ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xcc000/0x4400!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x80
> ppb0 at pci0 dev 1 function 0 "VIA VT8377 PCI-PCI" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci0 dev 10 function 0 "Matrox MGA Millennium II 2164W" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> fxp0 at pci0 dev 12 function 0 "Intel 82557" rev 0x08, i82559: irq 10,
> address 00:90:27:93:85:c2
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA
> pciide0: using irq 3 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <ST3200822AS>
> wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide1 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, DVDR PX-708A, 1.08> SCSI0
> 5/cdrom removable
> cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide1: channel 1 disabled (no drives)
> uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 12
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 12
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 3
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 3
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> pcib0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
> auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5
> ac97: codec id 0x41445368 (Analog Devices AD1888)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auvia0
> vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 12 address
> 04:04:04:04:04:04
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
> ukphy0: OUI 0x0090c3, model 0x0005, rev. 4
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> it0 at isa0 port 0x290/8: IT87
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask fb6d netmask ff6d ttymask ffef
> pctr: user-level cycle counter enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
