Hello,
I have a machine that I'm not able to upgrade
because the machine won't boot newer kernels.
They're hanging right after SATA init and it
also displays different SATA/pciide chip model
(VT6420) than with 3.8.
I've tried 3.9-release from official CD, 4.0-release
and 4.1-release kernels and some snapshots.
hw.machine=i386
hw.model=AMD Athlon(TM) XP 1700+ ("AuthenticAMD" 686-class, 256KB L2
cache)
hw.ncpu=1
hw.byteorder=1234
hw.physmem=267988992
hw.usermem=267653120
hw.pagesize=4096
hw.disknames=wd0,cd0,fd0
hw.diskcount=3
hw.sensors.3=it0, VCORE_A, volts_dc, 1.84 V
hw.sensors.4=it0, VCORE_B, volts_dc, 0.00 V
hw.sensors.5=it0, +3.3V, volts_dc, 3.22 V
hw.sensors.6=it0, +5V, volts_dc, 4.92 V
hw.sensors.7=it0, +12V, volts_dc, 11.97 V
hw.sensors.8=it0, Unused, volts_dc, -8.60 V
hw.sensors.9=it0, -12V, volts_dc, -17.00 V
hw.sensors.10=it0, +5VSB, volts_dc, 5.00 V
hw.sensors.11=it0, VBAT, volts_dc, 4.08 V
hw.sensors.12=it0, Temp1, temp, 47.00 degC / 116.60 degF
hw.sensors.13=it0, Temp2, temp, 37.00 degC / 98.60 degF
hw.sensors.14=it0, Temp3, temp, 127.00 degC / 260.60 degF
hw.cpuspeed=1467
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(TM) XP 1700+ ("AuthenticAMD" 686-class, 256KB L2 cache)
1.47 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu0: AMD Powernow: FID
real mem = 267988992 (261708K)
avail mem = 237649920 (232080K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(48) BIOS, date 06/28/05, BIOS32 rev. 0 @
0xf1940
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x1ff2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1f20/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C586 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xcc000/0x4400!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x80
ppb0 at pci0 dev 1 function 0 "VIA VT8377 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci0 dev 10 function 0 "Matrox MGA Millennium II 2164W" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 12 function 0 "Intel 82557" rev 0x08, i82559: irq 10,
address 00:90:27:93:85:c2
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA
pciide0: using irq 3 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3200822AS>
wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, DVDR PX-708A, 1.08> SCSI0 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 12
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 3
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 3
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5
ac97: codec id 0x41445368 (Analog Devices AD1888)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 12 address
04:04:04:04:04:04
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0090c3, model 0x0005, rev. 4
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fb6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
Antti Harri
