Hi, trying to install or upgrade OpenBSD 4.0 release does not seem to work on Fujitsu Siemens Primergy P200 machines with an Adaptec 2100S RAID controller.
While booting up, the kernel hangs at: --- screen copy --- usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifi fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask f7c5 netmask ffe5 ttymask ffe7 rd0: fixed, 3800 blocks iop0: configuring... ioprbs0 at iop0 tid 518: <ADAPTEC, RAID-1, FS24> direct access, fixed scsibus 2 at ioprb0: 1 targets sd0 at scsibus2 targ 0 lun 0: <I2O, Container #00, > SCSI2 0/direct fixed sd0: 17300MB, 17300 cyl, 64 head, 32 sec, 512 bytes/sec, 35430400 sec total iopsp0 at iop0 tid 8: SCSI port <ADAPTEC, AIC-7899, 00000001> scsibus3 at iopsp0: 16 targets I already tried out several combinations of BIOS and Adaptec RAID controller flash versions with no luck for OpenBSD 4.0. -Flo
