Michel Hubert wrote:
Get stuck on the same place on IBM x335 using Adaptec 2100S RAID
controller when installing 4.0.
Worked well on OpenBSD 3.7
Is that controler still supported?
Working for me...
OpenBSD 4.0 (GENERIC.MP) #1: Thu Nov 16 18:35:23 EST 2006
[EMAIL
PROTECTED]:/home/binpatch/work-binpatch-4.0/src/sys/arch/i386/compile/GENERIC.MP
cpu0: AMD Athlon(tm) MP 2400+ ("AuthenticAMD" 686-class, 256KB L2 cache) 2.01
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1073246208 (1048092K)
avail mem = 970956800 (948200K)
using 4256 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(03) BIOS, date 08/01/03, BIOS32 rev. 0 @ 0xfb100,
SMBIOS rev. 2.2 @ 0xf0800 (44 entries)
bios0: MICRO-STAR INTERNATIONAL CO., LTD MS-6501
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf94
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 5 11
pcibios0: PCI Interrupt Router at 000:07:0 ("AMD 768 Power" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xf400 0xd0000/0x6000! 0xd6000/0x1800
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) MP 2400+ ("AuthenticAMD" 686-class, 256KB L2 cache) 2.01
GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "AMD 762 PCI" rev 0x20
ppb0 at pci0 dev 1 function 0 "AMD 762 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "AMD 768 ISA" rev 0x05
pciide0 at pci0 dev 7 function 1 "AMD 768 IDE" rev 0x04: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITEON, CD-ROM LTN526S, YS0N> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
amdpm0 at pci0 dev 7 function 3 "AMD 768 Power" rev 0x03: rng active
iic0 at amdpm0
auich0 at pci0 dev 7 function 5 "AMD 768 AC97" rev 0x03: apic 2 int 17 (irq 11),
AMD768 AC97
ac97: codec id 0x414c4710 (Avance Logic ALC200)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
vga1 at pci0 dev 8 function 0 "NVIDIA GeForce FX 5200" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 9 function 0 "DPT PCI-PCI" rev 0x02
pci2 at ppb1 bus 2
iop0 at pci0 dev 9 function 1 "DPT SmartRAID (I2O)" rev 0x02: I2O adapter
<ADAPTEC 2100S>
iop0: interrupting at apic 2 int 17 (irq 11)
ppb2 at pci0 dev 16 function 0 "AMD 768 PCI-PCI" rev 0x05
pci3 at ppb2 bus 3
ohci0 at pci3 dev 0 function 0 "AMD 768 USB" rev 0x07: apic 2 int 19 (irq 11),
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
fxp0 at pci3 dev 9 function 0 "Intel 8255x" rev 0x10, i82551: apic 2 int 17 (irq
11), address 00:0c:76:7f:78:46
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
ioapic0: pin 17 shares different IPL interrupts (40..90), degraded performance
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
apm0: disconnected
iop0: configuring...
ioprbs0 at iop0 tid 525: <ADAPTEC, RAID-1, 370F> direct access, fixed
scsibus1 at ioprbs0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <I2O, Container #00, > SCSI2 0/direct fixed
sd0: 35003MB, 35003 cyl, 64 head, 32 sec, 512 bytes/sec, 71686144 sec total
ioprbs1 at iop0 tid 526: <ADAPTEC, RAID-5, 370F> direct access, fixed
scsibus2 at ioprbs1: 1 targets
sd1 at scsibus2 targ 0 lun 0: <I2O, Container #00, > SCSI2 0/direct fixed
sd1: 858306MB, 858306 cyl, 64 head, 32 sec, 512 bytes/sec, 1757810688 sec total
iopsp0 at iop0 tid 8: SCSI port <ADAPTEC, AIC-7899, 00000001>
scsibus3 at iopsp0: 16 targets
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
