I forgot that list doesn't forward attachments, so I appended dmesg below,
and if anyone wants acpidump, let me know, I'll send it directly.


OpenBSD 4.0 (RAMDISK_CD) #39: Sat Sep 16 19:34:26 MDT 2006
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Genuine Intel(R) CPU T2500 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2
real mem  = 526217216 (513884K)
avail mem = 473526272 (462428K)
using 4256 buffers containing 26415104 bytes (25796K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ad) BIOS, date 05/10/06, BIOS32 rev. 0 @ 0xfdc74, 
SMBIOS rev. 2.4 @ 0xe5860 (53 entries)
bios0: FUJITSU LifeBook T4210
pcibios0: pcibios_get_status - function not supported
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xe600! 0xce800/0x1000 0xcfa00/0x1000 0xdc000/0x1c00!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon" rev 0x12, Marvell Yukon-2 EC 
Ultra rev. A1 (0x2): irq 11
msk0 at mskc0 port A, address 00:17:42:12:c8:66
ukphy0 at msk0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI 
0x005043, model 0x000b
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 5
"Atheros AR5424" rev 0x01 at pci3 dev 0 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
ehci0: timed out waiting for BIOS
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 8
cbb0 at pci4 dev 3 function 0 vendor "O2 Micro", unknown product 0x7134 rev 
0x20: irq 11
cbb1 at pci4 dev 3 function 1 vendor "O2 Micro", unknown product 0x7134 rev 
0x20pci_intr_map: no mapping for pin A
: couldn't map interrupt
vendor "O2 Micro", unknown product 0x7120 (class system subclass SD Host 
Controller, rev 0x00) at pci4 dev 3 function 2 not configured
vendor "O2 Micro", unknown product 0x7130 (class bridge subclass miscellaneous, 
rev 0x00) at pci4 dev 3 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 9 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224E-C, 4.AA> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM AHCI SATA" rev 0x02: DMA, 
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <FUJITSU MHV2080BH PL>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801GB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
biomask fffd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
umass0 at uhub4 port 1 configuration 1 interface 0
umass0: LEXAR MEDIA JUMPDRIVE TRAVELER, rev 2.00/20.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <LEXAR, JUMPDRIVE TRAVEL, 2000> SCSI0 0/direct 
removable
sd0: 493MB, 493 cyl, 64 head, 32 sec, 512 bytes/sec, 1010784 sec total
vendor 0x0c24 product 0x000f, class 224/1, rev 2.00/19.15, addr 2, uhub2 port 1 
not configured
vendor 0x08ff Fingerprint Sensor, class 255/255, rev 1.10/6.21, addr 3, uhub2 
port 2 not configured
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: sd0 matches BIOS drive 0x81
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
umass0: at uhub4 port 1 (addr 2) disconnected
sd0 detached
scsibus1 detached
umass0 detached
umass0 at uhub4 port 1 configuration 1 interface 0
umass0: LEXAR MEDIA JUMPDRIVE TRAVELER, rev 2.00/20.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <LEXAR, JUMPDRIVE TRAVEL, 2000> SCSI0 0/direct 
removable
sd0: 493MB, 493 cyl, 64 head, 32 sec, 512 bytes/sec, 1010784 sec total

Reply via email to