Hi all,
i386 / 4.0 (Aug. 28 2006 23:10 snap)
dmesg below.
I am replacing a couple of high-traffic routers in our datacenter and
have just received (among others) a bunch of Syskonnect SK-9X22 dual
Gbit server adapters for the job.
These nic's should be supported by the 'msk' driver from 3.9-current as
of ~ Aug. 20 2006 and they are also recognized by the system ... sort
of. For comparison please note the 'bge' nic's.
Please note that on the Supermicro X6DH8-XB board I have disabled (in
bios or by jumper):
ACPI
HTT
COM2
onboard 'bge' nic's (enabled while debugging)
Adaptec U320 controller
Any kind of input that can bring me closer to a couple of working
systems is appreciated a lot.
From dmesg
[...]
OpenBSD 4.0 (GENERIC) #1097: Mon Aug 28 22:11:47 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16
real mem = 2146484224 (2096176K)
avail mem = 1949913088 (1904212K)
using 4256 buffers containing 107425792 bytes (104908K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ce) BIOS, date 01/24/06, BIOS32 rev. 0 @ 0xfd420,
SMBIOS rev. 2.33 @ 0x7ff79000 (41 entries)
bios0: Supermicro X6DH8-XB
pcibios0 at bios0: rev 2.1 @ 0xfd420/0xbe0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde20/448 (26 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #10 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000
ipmi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0c
"Intel E7520 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured
"Intel E7520 MCH DMA" rev 0x0c at pci0 dev 1 function 0 not configured
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0c
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
mskc0 at pci2 dev 1 function 0 "Schneider & Koch SK-9Sxx" rev 0x14, Marvell
Yukon-2 XL rev. A3 (0x3): irq 5
msk0 at mskc0 port A, address 00:00:5a:72:e0:4e
msk0: phy failed to come ready
msk0: no PHY found!
msk1 at mskc0 port B, address 00:00:5a:72:e0:4f
msk1: phy failed to come ready
msk1: no PHY found!
mskc1 at pci2 dev 3 function 0 "Schneider & Koch SK-9Sxx" rev 0x14, Marvell
Yukon-2 XL rev. A3 (0x3): irq 5
msk2 at mskc1 port A, address 00:00:5a:72:e1:7f
msk2: phy failed to come ready
msk2: no PHY found!
msk3 at mskc1 port B, address 00:00:5a:72:e1:80
msk3: phy failed to come ready
msk3: no PHY found!
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
mskc2 at pci3 dev 1 function 0 "Schneider & Koch SK-9Sxx" rev 0x14, Marvell
Yukon-2 XL rev. A3 (0x3): irq 5
msk4 at mskc2 port A, address 00:00:5a:72:e0:30
msk4: phy failed to come ready
msk4: no PHY found!
msk5 at mskc2 port B, address 00:00:5a:72:e0:31
msk5: phy failed to come ready
msk5: no PHY found!
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 3 not configured
ppb3 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0c
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101):
irq 5, address 00:30:48:78:76:a8
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x0c
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101):
irq 5, address 00:30:48:78:76:a9
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0c
pci6 at ppb5 bus 6
ppb6 at pci0 dev 7 function 0 "Intel MCH PCIE" rev 0x0c
pci7 at ppb6 bus 7
ppb7 at pci7 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci8 at ppb7 bus 8
mskc3 at pci8 dev 1 function 0 "Schneider & Koch SK-9Sxx" rev 0x14, Marvell
Yukon-2 XL rev. A3 (0x3): irq 5
msk6 at mskc3 port A, address 00:00:5a:72:e0:42
msk6: phy failed to come ready
msk6: no PHY found!
msk7 at mskc3 port B, address 00:00:5a:72:e0:43
msk7: phy failed to come ready
msk7: no PHY found!
"Intel IOxAPIC" rev 0x09 at pci7 dev 0 function 1 not configured
ppb8 at pci7 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci9 at ppb8 bus 9
"Intel IOxAPIC" rev 0x09 at pci7 dev 0 function 3 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 7
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 10
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb9 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci10 at ppb9 bus 10
vga1 at pci10 dev 1 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD160JJ>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1 at pciide0 channel 0 drive 1: <ST3250620AS>
wd1: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PHILIPS, PCA123CD, 17P> SCSI0 5/cdrom removable
cd0(pciide0:1:1): using PIO mode 2, DMA mode 1
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 10
iic0 at ichiic0
lm1 at iic0 addr 0x2d: W83627HF
lm2 at iic0 addr 0x2f: W83792D rev D
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
lm1 detached
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
msk6: watchdog timeout
msk7: watchdog timeout
msk3: watchdog timeout
msk0: watchdog timeout
msk5: watchdog timeout
msk2: watchdog timeout
msk7: watchdog timeout
msk4: watchdog timeout
msk1: watchdog timeout
msk3: watchdog timeout
msk0: watchdog timeout
msk6: watchdog timeout
msk1: watchdog timeout
msk1: watchdog timeout
msk1: watchdog timeout
msk1: watchdog timeout
msk1: watchdog timeout
msk1: watchdog timeout
msk0: watchdog timeout
msk1: watchdog timeout
msk2: watchdog timeout
msk3: watchdog timeout
msk4: watchdog timeout
msk5: watchdog timeout
msk6: watchdog timeout
msk7: watchdog timeout
[...]
best regards,
/per
[EMAIL PROTECTED]
