Hi all
I'm running OpenBSD 3.9 X86 on an HP Proliant DL140 G2.
The first problem I had was at install time, it would hang and PCIIDE
would complain of timeouts accessing wd0.
I got through the install by disabling PCIIDE at kernel boot time.
After the install, I (obviously) got the same problem and ended up
changing the UDMA flags on pciide to 0xCAC (ie. UDMA4, DMA2 & PIO4).
However the disk access is sloooooow as can be (talking 2MB/sec reads,
1MB/Sec writes).
My dmesg doesn't mention PCIIDE or DMA at all.
Can anyone at all help me here ? I'm reasonably new to OpenBSD and feel a
bit like a fish with no fins.....
Dmesg :
$ dmesg
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,CNXT-ID
cpu0: Enhanced SpeedStep disabled by BIOS
real mem = 1072717824 (1047576K)
avail mem = 972107776 (949324K)
using 4278 buffers containing 53739520 bytes (52480K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(24) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xfd410
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd410/0xbf0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde30/432 (25 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #7 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1600 0xc9800/0x1600 0xdc000/0x4000!
ipmi: bus_space_map(1 ca0 2 0 d070bd64) failed
ipmi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0c
"Intel E7520 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0c
pci1 at ppb0 bus 1
ppb1 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0c
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 5, address 00:15:60:09:d3:f6
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x0c
pci3 at ppb2 bus 3
bge1 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 5, address 00:15:60:09:d3:f7
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0c
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci5 at ppb4 bus 5
"Intel IOxAPIC" rev 0x09 at pci4 dev 0 function 1 not configured
ppb5 at pci4 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 6
"Intel IOxAPIC" rev 0x09 at pci4 dev 0 function 3 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci7 at ppb6 bus 7
vga1 at pci7 dev 1 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
"Intel 82801EB SATA" rev 0x02 at pci0 dev 31 function 2 not configured
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 10
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <Maxtor 6L080M0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(wdc0:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask efed netmask efed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
AlanP
