Hi guys
I can confirm updating to the latest snapshot fixes the problem.
It now *flies* along !
Thanks Chris
--
AlanP
On Fri, August 11, 2006 4:52 am, Chris Cappuccio wrote:
> your dmesg shows that pciide doesn't attach to your SATA controller and
> wd0 is attaching to an isa device. try a current snapshot
>
> Alan Pearson [EMAIL PROTECTED] wrote:
>> Hi all
>>
>> I'm running OpenBSD 3.9 X86 on an HP Proliant DL140 G2.
>>
>> The first problem I had was at install time, it would hang and PCIIDE
>> would complain of timeouts accessing wd0.
>>
>> I got through the install by disabling PCIIDE at kernel boot time.
>>
>> After the install, I (obviously) got the same problem and ended up
>> changing the UDMA flags on pciide to 0xCAC (ie. UDMA4, DMA2 & PIO4).
>>
>> However the disk access is sloooooow as can be (talking 2MB/sec reads,
>> 1MB/Sec writes).
>>
>> My dmesg doesn't mention PCIIDE or DMA at all.
>> Can anyone at all help me here ? I'm reasonably new to OpenBSD and feel
>> a
>> bit like a fish with no fins.....
>>
>> Dmesg :
>> $ dmesg
>> OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
>> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
>> cpu0: Intel(R) Xeon(TM) CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,CNXT-ID
>> cpu0: Enhanced SpeedStep disabled by BIOS
>> real mem = 1072717824 (1047576K)
>> avail mem = 972107776 (949324K)
>> using 4278 buffers containing 53739520 bytes (52480K) of memory
>> mainbus0 (root)
>> bios0 at mainbus0: AT/286+(24) BIOS, date 12/31/99, BIOS32 rev. 0 @
>> 0xfd410
>> apm0 at bios0: Power Management spec V1.2
>> apm0: AC on, battery charge unknown
>> apm0: flags 30102 dobusy 0 doidle 1
>> pcibios0 at bios0: rev 2.1 @ 0xfd410/0xbf0
>> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde30/432 (25 entries)
>> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev
>> 0x00)
>> pcibios0: PCI bus #7 is the last bus
>> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1600 0xc9800/0x1600
>> 0xdc000/0x4000!
>> ipmi: bus_space_map(1 ca0 2 0 d070bd64) failed
>> ipmi at mainbus0 not configured
>> cpu0 at mainbus0
>> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
>> pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0c
>> "Intel E7520 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured
>> ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0c
>> pci1 at ppb0 bus 1
>> ppb1 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0c
>> pci2 at ppb1 bus 2
>> bge0 at pci2 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
>> (0x4101): irq 5, address 00:15:60:09:d3:f6
>> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
>> ppb2 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x0c
>> pci3 at ppb2 bus 3
>> bge1 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
>> (0x4101): irq 5, address 00:15:60:09:d3:f7
>> brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
>> ppb3 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0c
>> pci4 at ppb3 bus 4
>> ppb4 at pci4 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
>> pci5 at ppb4 bus 5
>> "Intel IOxAPIC" rev 0x09 at pci4 dev 0 function 1 not configured
>> ppb5 at pci4 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
>> pci6 at ppb5 bus 6
>> "Intel IOxAPIC" rev 0x09 at pci4 dev 0 function 3 not configured
>> uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 5
>> usb0 at uhci0: USB revision 1.0
>> uhub0 at usb0
>> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
>> uhub0: 2 ports with 2 removable, self powered
>> uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 3
>> usb1 at uhci1: USB revision 1.0
>> uhub1 at usb1
>> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
>> uhub1: 2 ports with 2 removable, self powered
>> ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 11
>> usb2 at ehci0: USB revision 2.0
>> uhub2 at usb2
>> uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
>> uhub2: 4 ports with 4 removable, self powered
>> ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
>> pci7 at ppb6 bus 7
>> vga1 at pci7 dev 1 function 0 "ATI Rage XL" rev 0x27
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
>> "Intel 82801EB SATA" rev 0x02 at pci0 dev 31 function 2 not configured
>> ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq
>> 10
>> iic0 at ichiic0
>> isa0 at ichpcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pms0 at pckbc0 (aux slot)
>> pckbc0: using irq 12 for aux slot
>> wsmouse0 at pms0 mux 0
>> wdc0 at isa0 port 0x1f0/8 irq 14
>> wd0 at wdc0 channel 0 drive 0: <Maxtor 6L080M0>
>> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
>> wd0(wdc0:0:0): using BIOS timings
>> pcppi0 at isa0 port 0x61
>> midi0 at pcppi0: <PC speaker>
>> spkr0 at pcppi0
>> npx0 at isa0 port 0xf0/16: using exception 16
>> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> biomask efed netmask efed ttymask ffef
>> pctr: user-level cycle counter enabled
>> dkcsum: wd0 matches BIOS drive 0x80
>> root on wd0a
>> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>>
>> --
>> AlanP
>
> --
> Theatre is life
> Film is art
> Television is furniture
