Hello,
I tried to install 3.9 stable and current on a lenovo thinkpad x60s, without
success.
BSD.rd does not find a hd.
Is someone already running a x60 or x60s with openbsd?
Thanks a lot
Didier
Dmesg:
OpenBSD 3.9-current (RAMDISK_CD) #1088: Sun Apr 23 00:40:48 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Genuine Intel(R) CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,VMX,EST,TM2
real mem = 2137337856 (2087244K)
avail mem = 1945284608 (1899692K)
using 4278 buffers containing 106971136 bytes (104464K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(2b) BIOS, date 03/13/06, BIOS32 rev. 0 @ 0xfd690
pcibios0 at bios0: rev 2.1 @ 0xfd620/0x9e0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0xe400! 0xce800/0x1000 0xcf800/0x1000 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: irq 11,
address 00:16:d3:21:4b:b6
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
"Intel PRO/Wireless 3945ABG" rev 0x02 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb4: irq 11
"Ricoh 5C552 Firewire" rev 0x09 at pci5 dev 0 function 1 not configured
"Ricoh 5C822 SD/MMC" rev 0x18 at pci5 dev 0 function 2 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 co
nfigured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
vendor "Intel", unknown product 0x27c5 (class mass storage subclass SATA, rev
0x02) at pci0 dev 31 function 2 not config
ured
"Intel 82801GB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
biomask fffd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
uhub5 at uhub4 port 6
uhub5: vendor 0x17ef product 0x1000, rev 2.00/0.01, addr 2
uhub5: 4 ports with 4 removable, self powered, multiple transaction translators
STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2,
uhub3 port 2 not configured
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
