> Dmesg?
The only line that appears over when I connect into any port is, when
using another hub:
uhub6: device problem, disabling port 1
And when using the root hub:
uhub1: device problem, disabling port 7
> Output from usbdevs -vv?
Controller /dev/usb0:
addr 01: 8086:0000 Intel, xHCI root hub
super speed, self powered, config 1, rev 1.00
driver: uhub0
port 01: 0000.02a0 power Rx.detect
port 02: 0000.02a0 power Rx.detect
port 03: 0000.02a0 power Rx.detect
port 04: 0041.02c0 power ss.inactive
port 05: 0000.02a0 power Rx.detect
Controller /dev/usb1:
addr 01: 8086:0000 Intel, xHCI root hub
super speed, self powered, config 1, rev 1.00
driver: uhub1
port 01: 0001.02a0 power Rx.detect
port 02: 0000.02a0 power Rx.detect
port 03: 0000.0103 connect enabled recovery
port 04: 0000.0503 connect enabled recovery
port 05: 0000.02a0 power Rx.detect
port 06: 0001.02a0 power Rx.detect
port 07: 0000.0503 connect enabled recovery
port 08: 0000.02a0 power Rx.detect
port 09: 0000.02a0 power Rx.detect
port 10: 0000.0103 connect enabled recovery
port 11: 0000.02a0 power Rx.detect
port 12: 0000.02a0 power Rx.detect
port 13: 0000.02a0 power Rx.detect
port 14: 0000.02a0 power Rx.detect
port 15: 0000.02a0 power Rx.detect
port 16: 0000.02a0 power Rx.detect
addr 02: 06cb:00bd Synaptics, Fingerprint Reader
full speed, power 100 mA, config 1, rev 0.00, iSerial d4d77c5d7de3
driver: ugen0
addr 03: 5986:2130 SunplusIT Inc, Integrated Camera
high speed, power 500 mA, config 1, rev 56.13
driver: uvideo0
addr 12: 8087:0026 Intel, Bluetooth
full speed, self powered, config 1, rev 0.02
driver: ugen2
> Did it work before upgrading to -current, or has it never worked?
It never worked.
> Do other USB devices work without problems?
Yes, with and without the external hub. All my other devices work, even
another audio device (DAC) which correctly uses uaudio
