Hi David, I encountered a relink failure after the last syspatch as well.
For me, ld segfaulted during the relink. I posted some info here: https://marc.info/?l=openbsd-bugs&m=175023041416172&w=2 I originally thought it was related to a change I had made, but now reading this I'm not so sure. Regards Lloyd David Diggles wrote: > Any ideas? I'm thinking maybe the root disk is on a bad CF card. > > Get/Verify syspatch77-001_nfs.tgz 100% > || 158 KB > 00:00 > Installing patch 001_nfs > Get/Verify syspatch77-002_zic.tgz 100% > || 24992 > 00:00 > Installing patch 002_zic > Get/Verify syspatch77-003_zoneinf... 100% > || 74310 00:00 > Installing patch 003_zoneinfo > Get/Verify syspatch77-004_pfsynco... 100% > || 359 KB 00:00 > Installing patch 004_pfsyncook > Get/Verify syspatch77-005_acme.tgz 100% > |**| 39531 > 00:00 > Installing patch 005_acme > Get/Verify syspatch77-006_xserver... 100% > || 4313 KB 00:02 > Installing patch 006_xserver > Relinking to create unique kernel... failed! > !!! "/usr/libexec/reorder_kernel" must be run manually to install the > new kernel > > # cat /usr/share/relink/kernel/GENERIC.MP/relink.log > (SHA256) /bsd: OK > LD="ld" sh makegap.sh 0xcccccccc gapdummy.o > ld -T ld.script -X --warn-common -nopie -o newbsd ${SYSTEM_HEAD} vers.o > ${OBJS} > ld: error: vega20_smumgr.o:(.debug_str): offset is outside the section > *** Error 1 in /usr/share/relink/kernel/GENERIC.MP (Makefile:2435 > 'newbsd': @echo ld -T ld.script -X --warn-common -nopie -o newbsd > '${SYSTE...) > > OpenBSD 7.7 (GENERIC.MP) #0: Sun May 4 11:23:50 MDT 2025 > > r...@syspatch-77-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4267245568 (4069MB) > avail mem = 4111486976 (3921MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0000 (39 entries) > bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date > 10/26/2010 > bios0: OEM OEM > acpi0 at bios0: ACPI 3.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET MCFG APIC > acpi0: wakeup devices PCI0(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) > PEX4(S5) PEX5(S5) HUB0(S5) UAR1(S5) UAR2(S5) IGBE(S5) USB0(S3) USB1(S3) > USB2(S3) USB3(S3) USB4(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.03 MHz, 06-1c-0a, patch > 00000107 > cpu0: cpuid 1 > edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > ecx=40e31d<SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> > > cpu0: cpuid 6 eax=1<SENSOR> ecx=1<EFFFREQ> > > cpu0: cpuid a vers=3, gp=2, gpwidth=40, ff=3, ffwidth=40 > cpu0: cpuid 80000001 edx=20100800<NXE,LONG> ecx=1<LAHF> > > cpu0: MELTDOWN > cpu0: 24KB 64b/line 6-way D-cache, 32KB 64b/line 8-way I-cache, 512KB > 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 200MHz > cpu0: mwait min=64, max=64, C-substates=0.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.02 MHz, 06-1c-0a, patch > 00000107 > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins, remapped > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (PEX0) > acpiprt2 at acpi0: bus 2 (PEX1) > acpiprt3 at acpi0: bus 3 (PEX2) > acpiprt4 at acpi0: bus -1 (PEX3) > acpiprt5 at acpi0: bus -1 (PEX4) > acpiprt6 at acpi0: bus -1 (PEX5) > acpiprt7 at acpi0: bus 4 (HUB0) > acpibtn0 at acpi0: PWRB > acpipci0 at acpi0 PCI0 > acpicmos0 at acpi0 > com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo > com1 at acpi0 UAR2 addr 0x2f8/0x8 irq 3: ns16550a, 16 byte fifo > "PNP0303" at acpi0 not configured > com4 at acpi0 UAR3 addr 0x2a0/0x8 irq 5: ns16550a, 16 byte fifo > com4: probed fifo depth: 15 bytes > com5 at acpi0 UAR4 addr 0x2a8/0x8 irq 7: ns16550a, 16 byte fifo > com5: probed fifo depth: 15 bytes > com6 at acpi0 UAR5 addr 0x280/0x8 irq 10: ns16550a, 16 byte fifo > com6: probed fifo depth: 15 bytes > com7 at acpi0 UAR6 addr 0x288/0x8 irq 11: ns16550a, 16 byte fifo > com7: probed fifo depth: 15 bytes > "PNP0C0B" at acpi0 not configured > acpicpu0 at acpi0: C1(@1 halt!) > acpicpu1 at acpi0: C1(@1 halt!) > acpitz0 at acpi0 > acpitz0: critical temperature is 98 degC > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 > inteldrm0 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02 > drm0 at inteldrm0 > intagp0 at inteldrm0 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0: apic 4 int 16, PINEVIEW, gen 3 > "Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x04: apic 4 int > 16 > uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x04: apic 4 int > 21 > ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x04: apic 4 int > 18 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC888 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x04: msi > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address > 00:03:1d:0b:48:fe > ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x04: msi > pci2 at ppb1 bus 2 > em1 at pci2 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address > 00:03:1d:0b:48:ff > ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x04: msi > pci3 at ppb2 bus 3 > em2 at pci3 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address > 00:03:1d:0b:49:00 > uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x04: apic 4 int > 23 > uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x04: apic 4 int > 19 > uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x04: apic 4 int > 18 > ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x04: apic 4 int > 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf4 > pci4 at ppb3 bus 4 > pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x04 > pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x04: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > wd0 at pciide0 channel 0 drive 1: <CF Card> > > wd0: 1-sector PIO, LBA48, 7623MB, 15613920 sectors > wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x04: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 4 int 19 for native-PCI interrupt > ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x04: apic 4 > int 19 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 4GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73 > lm1 at wbsio0 port 0x290/8: W83627DHG > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (f0d29aa41984a920.a) swap on wd0b dump on wd0b > inteldrm0: 800x600, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using > wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > acpitz0: _AL0[0] _PR0 failed > carp1: state transition: BACKUP -> MASTER > > carp1: state transition: MASTER -> BACKUP
