It is working “Ok” in current setup. But occasionally I get “No audio” on incoming calls. But it is not easy to reproduce. Having had a hacked PBX once, which was trying to make international calls, i really hesitate to put it into the wild unprotected. I prefer setting up the bridge solution first to rule out any NAT problems.
> On 27. May 2025, at 19:26, Fabio Martins <m...@phosphorus.com.br> wrote: > > By personal experience, this setup gives a lot of problems in PBX/SIP systems > (mostly codecs). If you are able to, try to put the public IP address in the > PBX system(s) itself, check if it is working fine. If yes, do the transparent > bridge. > > On 5/27/25 14:12, Heinrich Rebehn wrote: >> No. It is located behind an OpenBSD firewall/router on a private lan: >> 192.168.xx.yy. > > -- > Fabio >
